Showing results: 166 - 180 of 638 items found.
-
EPS-2032 -
ADLINK Technology Inc.
*32-CH sourcing type digital output*Quick removable European type connector*Slave module healthy monitoring*Wide operation temperature range*: -20°C - 60°CCompact size: 100 (L) x 100 (H) mm
-
HSL-TB32-U-DIN -
ADLINK Technology Inc.
*Field I/O wiring connection for HSL I/O modules*Spring terminal for easy field wiring*Power and ground included for each signal channel*Interlocking design for rugged installation*Power LED indicator
-
aTCA-80302PA -
ADLINK Technology Inc.
*19” Rackmount, 3U height, 385mm depth*2-slot full-mesh topology Fabric Interface*2-slot standard Rear Transition Module*Dual-bussed IPMB*Hot-swappable IPMC controlled fan trays
-
aTCA-80302PD -
ADLINK Technology Inc.
*19” Rackmount, 3U height, 385mm depth*2-slot full-mesh topology Fabric Interface*2-slot standard Rear Transition Module*Dual-bussed IPMB*Hot-swappable IPMC controlled fan trays
-
-
cPCI-3E10/3E12 -
ADLINK Technology Inc.
The cPCI-3E10 Series is 3U CompactPCI Gigabit Ethernet peripheral card equipped with Intel® 82574L PCIe Gigabit Ethernet controllers. The cPCI-3E10 provides four GbE ports on the front panel (RJ-45) with two switchable to the rear transition module, the cPCI-3E12 provides two GbE ports on the front panel (RJ-45), and the cPCI-3E10-SUB provides two Fast Ethernet ports on the front panel (DB-9). An optional Rear Transition Module (cPCI-R3E10) is available to provide rear access to the GbE ports switched from the cPCI-3E10 front panel.
-
ADLINK Technology Inc.
3-4U chassis for 3U CompactPCI boards, most of which are with front/rear panel I/O and redundant power supplies.
-
cPCI-3620 -
ADLINK Technology Inc.
The ADLINK cPCI-3620 Series is a 3U CompactPCI® processor blade featuring a quad-core 4th generation Intel® Atom SOC and soldered DDR3L-1333 ECC memory up to 4GB.
-
cPCI-3630 -
ADLINK Technology Inc.
The ADLINK cPCI-3630 Series is a 3U CompactPCI® 2.0 processor blade featuring the 64-bit Intel Atom® Processor X Series SoC (formerly Apollo Lake I) and soldered DDR3L-1600 MHz ECC memory up to 8GB.
-
cPCI-A3H10 -
ADLINK Technology Inc.
*3U 4HP CPCI-S.0 peripheral*One 2.5" SATA 6Gb/s drive slot*Status LEDs on faceplate: drive activity, hot-swap status, user-configurable*Hot swap support*Operating temperature: -40°C to 85°C with qualified com
-
cPCI-A3X10 -
ADLINK Technology Inc.
*3U 4HP CPCI-S.0 peripheral*One XMC slot*Operating temperature: -40°C to 85°C with qualified com
-
ADLINK Technology Inc.
As the products that best exemplify SWaP priorities within ADLINK’s VPX line, the 3U VPX platform packs tremendous capability in a processor blade, and supports a range of VITA 46.x specifications, VITA 48.0 for ruggedized implementation, as well as adhering to the VITA 65 OpenVPX architecture
-
aTCA-3710 -
ADLINK Technology Inc.
The aTCA-3710 is a high performance, high bandwidth, 40G Fabric switch blade for AdvancedTCA® platforms. This product is ideal for bandwidth intensive telecom applications such as wireless access controller, DPI/security network, IPTV, IP multimedia subsystem, RNC/BSC, broadband access/bearer network, data center, and LTE/4G network applications. The aTCA-3710 provides 40GbE hub-to-node connectivity and integrated switch silicon that supports load balancing, priority queues, packet classification, and flow control to enable strict bandwidth management for implemented applications.
-
ND-6124 -
ADLINK Technology Inc.
The NuDAM modules provide direct communications with a wide variety of sensors; perform signal conditioning, scaling, linearization and conversion; can acquire measurements of temperature, pressure, flow, voltage, current; and handle multiple digital signal types broadly used in IoT and other industrial applications, such as facility monitoring, environment monitoring, and industrial process control. The new ND-6117, ND-6124, ND-6150, and ND-6160 modules feature Modbus/RTU as the best remote data transmission protocol, which provides customers a comprehensive product offering.
-
AMP-304C -
ADLINK Technology Inc.
AMP-304C is an advanced 4-axis motion controller card with a PCI Express® interface that can generate a pulse train up to 9.99MHz to control a motor. With more general purpose as well as dedicated IOs, functional logic selection switches, 4-channel encoder feedback input, AMP-304C can be used for a multitude of scenarios or applications.