Showing recent results 1 - 15 of 80 products found.
-
Teledyne Microwave Solutions
Teledyne RF & Microwave IQ Demodulators are fully space-qualified designs providing stringent phase and amplitude matching, and superior output third order intercept performance. To meet high LO and IF rejection requirements diplexers are used at the I and Q ports. All components and processing fully meet MIL-PRF-38534, Class K and MIL-DTL-28837. Teledyne RF & Microwave can provide performance to meet most receiver system requirements, including single or moving LO frequencies and tight phase and amplitude matching. Customers can specify our designs for space, military, or commercial applications.
-
Teledyne Microwave Solutions
Teledyne Microwave Solutions (TMS) offer a capable range of high performance IQ Modulators and Image Reject Mixers as well as IQ (Quadraphase) Modulators which can be used on applications from commercial test equipment to space qualified projects. IQM products can be used either as an IQ modulator or IQ demodulator and cover several frequency bands from 1.4 GHz to 18 GHz.
-
Teledyne Microwave Solutions
Teledyne Microwave Solutions (TMS) offers ultra-miniature discrete filters in a wide range of frequencies and design approaches. In-house research and development efforts, coupled with propriety computer software, helps maintain TMS at the leading edge of technology.
-
Teledyne Microwave Solutions
Teledyne Microwave Solutions (TMS) offer a range of Limiting Amplifiers which are used in instantaneous frequency and phase measurement receivers. The most important performance requirement of a limiting amplifier is to minimize output power variations, and provide a constant output over a wide input dynamic range.
-
Teledyne Microwave Solutions
Gain Shape Linearizer Amplifiers are used in a number of applications where it's necessary to flatten the gain characteristic of the preceding or following component. This would include flattening the attenuation of a long cable run, or perhaps changing the input gain response to a MPM (Microwave Power Module) or TWT (Traveling Wave Tube) to compensate for the gain variation within the tube.
-
Teledyne Microwave Solutions
We have designed and manufactured amplifiers using all major semiconductor materials, LDMOS, GaN, GaAs, and InP, to produce narrow, wideband, and pulse, receive and transmit amplifiers from 1 MHz to 220 GHz and power levels from mW to over 10 kW.
-
Teledyne Microwave Solutions
IFMs find applications in low cost radar warning receivers (RWR) to enhance the identification of threat signals against dense non threat background signals. IFMs are used in sophisticated electronic support measurement (ESM) and electronic counter measurement (ECM) receivers where high probability of intercept and high resolution are required to enable pulse by pulse signal de-interleaving. TDS’s IFMs employ proprietary 3 phase correlator design which combines the advantages of a robust and compact suspended substrate strip-line (SSS) construction and microwave Integrated circuit (MIC) techniques.
-
Teledyne Microwave Solutions
Teledyne Microwave Solutions (TMS) offers a variety of analog controlled attenuators operating over a 10MHz to 26GHz range. With many units operating over many octaves, switching speeds less than 100nS and attenuation control up to 50dB, TMS has a product that meets your demanding needs.
-
Teledyne Microwave Solutions
Teledyne’s Bulk Acoustic Wave (BAW) Product Line has been producing BAW delay devices since the early 1960’s. Over the years, Teledyne Microwave Solutions (TMS) has constantly improved BAW technology and is currently the world’s only supplier of microwave bulk acoustic wave delay devices. Markets for BAW devices include instrumentation and radar altimeters and are available in connectorized, pin and surface mount configurations.
-
Teledyne Microwave Solutions
Teledyne RF & Micrrowave's Six Channel 2 - 18 GHz (RF and LO) downconverter operates with an IF of ~960 MHz, providing 25 dB of RF-IF gain, and bandwidth of ~500 MHz. This downconverter operates on a single LO at -6 dBm which is amplified, split, then again amplified to each of the 6 channels. Integrated into each channel is a range extension switch, controlled by a TTL input and adding 20 dB attenuation. Noise figure is ~ 13.5 dB and output IP3 is ~+25 dBm. The downconverter is 2- sided, hermetically sealed and designed for rugged applications.
-
Q-NET™ - Teledyne Microwave Solutions
Q-NET™ is an exciting new bandwidth management platform for service providers demanding more variable throughput services. Explosive bandwidth demand has providers scrambling to find new options to optimize their networks to meet the profitability challenge. However, the age-old limitations of existing VSAT/TDMA and SCPC architectures present a dilemma: choosing between: achieving SCPC-efficient throughput OR the high network utilization of VSAT/TDMA. Q-NET™ solves this problem, delivering the best of both worlds – efficient throughput and high utilization – to achieve 50% bandwidth savings and more while maximizing link efficiency, connectivity and profitability.
-
Teledyne Microwave Solutions
By combining significant R&D funding with judicious acquisitions of microwave technology leaders, Teledyne Microwave Solutions (TMS) has built a strong portfolio of SSPAs supported by innovative, collaborative engineering and manufacturing teams. Covering 100MHz to 100GHz, with power from 0.1W to 10kW, TMS SSPAs include both Pulsed and CW for all markets, from commercial Satcom to military and space qualified platforms.
-
Teledyne Microwave Solutions
The versatility of the printed circuit technology enables designs to be used in very complex mechanical configurations and allows easy integration of other components onto the circuit boards. This technology is also integrated into many of Teledyne Defence’s subsystem products such as switched multiplexers, frequency activity detectors and frequency synthesisers.
-
Teledyne Microwave Solutions
One of many potential designs, Teledyne RF & Microwave's switched amplifier covers 100 to 2000 MHz, providing 18 dB gain, phase matched to within ±1.0 degree. The primary RF input and a secondary calibration signal input are switched, then amplified, and split to two outputs. Gain balance between any of the two outputs is ± 0.5 dB. Output power at 1 dB compression is +14 dBm and input/output VSWR is 2.0:1 maximum.
-
Teledyne Microwave Solutions
Operates at 3 GHz-10 to -5 dBm Input Power to +4 to +7 Output powerAnalog Detector OutputTTL Compatible, 70 dB On-to-Off Ratio, 50 ηSec Response Integrated RF Switch
