Jet Technology Co., Ltd.

Design and manufacture In-Circuit Tester. (ICT.) Our R&D team has been devoted to ICT development and improvement to advance the ICT function, speed, and reliability so that the ICT is capable of helping the quality control of SMD production lines, improving the product yield rate, and thus,

  • +886-2-85123066
  • +886-2-85123231
  • jetict@jettech.com.tw
  • 8F, NO.88-1 KUNG-FU RD., SEC.1
    SAN-CHUNG Dist.
    New Taipei City,
    Taiwan

Filter Results By:

Products

Applications

Showing recent results 1 - 8 of 8 products found.

  • AOI (Automatic Optical Inspector)

    JET-7300 - Jet Technology Co., Ltd.

    JET-7300 AOI systems provide accurate inspection and complete defect coverage before or after reflow. By using a telecentric lens with a 12-megapixel camera , the JET-7300 achieve fast and accurate inspection of soldered components. With high optional resolution (5.5 um , 7 um or 10 um) , the inspection of small components such as 01005 chips can be detected easily and the inspection speed can be up to 60 cm2/sec. The RGB and coaxial lighting enable to flexibly adjust different light sources in the same field of view and capture more clear images. The Stop & Go system helps eliminate image collage and shadow problems caused by mirror-like or black components. With the easy programming and friendly user interface , JET-7300 provide the real-time production management with more efficient productivity and quality.

  • AOI for DIP lines

    JET-7300TB I - Jet Technology Co., Ltd.

    JET-7300TB I AOI with the down light lighting is designed to improve soldered component inspection for DIP lines . By using a telecentric lens with a 12-megapixel camera , the RGB and coaxial lighting and the ultra high resolution of 10um , the JET-7300TB I provides accurate inspection at a scanning rate of 130 cm2/sec and achieves complete fault coverage for dips . With the down light lighting , PCBs aren’t needed to be turned over so the JET-7000BM is suitable for inspections before wave soldering. The Stop & Go system eliminates image collage and shadow problems caused by the vibration imaging . The easy programming and friendly user interface provide the real-time production management and make operation more convenient.

  • IN-LINE ICT Test

    I1000 in-line system - Jet Technology Co., Ltd.

    JET Technology makes every endeavor to search for the IN-LINE ICT solutions so as to meet the requirement due to the trend of automatic production. The i1000 IN-LINE ICT can help getting rid of board handling if the loaders and un-loaders are equipped with the ICT. The IN-LINE ICT powerfully makes the producing process even more smoothly and it enhances the capability and quality at the same time.

  • ICT Test

    I1000 - Jet Technology Co., Ltd.

    The Keysight Medalist i1000D is now even improving from its previous state of an analog-only ICT, the new digital release of the system features per pin programmable digital cards and a whole new set of intuitive software graphical user interfaces (GUIs) that makes programming and development effortless.

  • ICT Test - Automatic Test Equipment

    JET 3000 PDU - Jet Technology Co., Ltd.

    JET-3000 PDU is an automatic test equipment which measures the impedance of all electronic components on a loaded printed circuit board. Components such as resistors, capacitors, inductors, diodes, transistors, FET, SCR, LED, ICs, etc. are all the objects for this tester to detect. The opens/ shorts fail, incorrect and disoriented components could be located. The overwhelming functions do help the users to find the faults and improve the quality efficiently.

  • SPI

    JET-6300M - Jet Technology Co., Ltd.

    JET-6300D 3D SPI system achieves the most accurate measurements of solder paste by its outstanding inspection performance and intelligent software environment. The latest dual projection design enables the JET -6300D to effectively eliminate the problems with shadow and specular reflection. With the highly accurate linear motor and the high resolution 3D camera, solder paste volume and height can be viewed clearly and the inspection speed can be up to 80cm2/sec at 10x10 um resolution. The flexible conveyor design allows using either dual lane or single lane mode to inspect different board sizes. The easy programming , friendly user interface and automatic compensation for board warp help improve production yield and quality.

  • SPI (Solder Paste Inspection)

    JET-6300D - Jet Technology Co., Ltd.

    JET-6300D 3D SPI system achieves the most accurate measurements of solder paste by its outstanding inspection performance and intelligent software environment. The latest dual projection design enables the JET -6300D to effectively eliminate the problems with shadow and specular reflection. With the highly accurate linear motor and the high resolution 3D camera, solder paste volume and height can be viewed clearly and the inspection speed can be up to 80cm2/sec at 10x10 um resolution. The flexible conveyor design allows using either dual lane or single lane mode to inspect different board sizes. The easy programming , friendly user interface and automatic compensation for board warp help improve production yield and quality.

  • SPI Solder Paste Inspection

    JET-6300 - Jet Technology Co., Ltd.

    JET-6300 3D SPI system provides an ideal solution to the inspection of solder paste by balancing capability and cost effectiveness. The latest dual projection design enables the JET -6300 to effectively eliminate the risk of shadowing and the problems with specular reflection. With the highly accurate linear motor and the high resolution 3D camera, solder paste volume and height can be checked easily and the inspection speed can be up to 80cm2/sec at 10x10 um resolution. The easy programming , friendly user interface and automatic compensation for board warp make the operation more convenient and help improve manufacturing yield.