Martel Calibrators
Martel Calibrators, a division of Martel Electronics, offers a diversified line of hand held and bench calibrators, process instruments, process indicators, and power supplies manufactured to the highest quality standards for the process industry and OEM applications.
- 800.821.0023
(603) 434-1433 - (603) 434-1653
- sales@martelcorp.com
- 3 Corporate Park Dr., Unit 1
Derry, NH 03038
United States
Filter Results By:
Products
Applications
-
product
Current Loop Calibrator
LC-100
The Current Loop Calibrator an accuracy of 0.015% and a 0.001 mA resolution. The loop calibrator can simulate, power, and measure two-wire transmitters. With automatic Step and Ramp functions, the precision loop calibrator also enables remote calibration of 4-20mA devices.
-
product
Documenting Multifunction Calibrator
DMC-1400
The DMC-1400 Calibrator fully documents any calibration easily while performing the normal job. No special software is required! It features the ability to test for pass/fail criteria, measure and simulate thermocouples, RTDs, current, voltage, and frequency, and source pulse trains. PLCs, full fuseless protection, and a serial communications port for full control with ASCII commands.
-
product
Lab Calibrator
M2000/M2001
The Lab Calibrator combines the power and features of a voltage/current calibrator, with the addition of thermocouple, RTD, and pressure calibration, for a single laboratory calibration instrument unmatched in versatility, performance, and value.
-
product
Loop Calibrator
MS-420
The Loop Calibrator is a multi-purpose process loop tool that offers high accuracy in an ultra-small, rugged package. A single pushbutton selects one of five current outputs (4, 8, 12, 16 or 20 mA), which can drive up to 300 Ohms, or can act as a 2-wire simulator with an external loop power supply of up to 30 VDC.
-
product
Precision Current Loop Calibrator With Hart Communications
LC-110H
The Martel LC-110 and LC-110H are mA (loop) calibrators designed to take the loop calibrator class to the next level. The new LC-110 series feature a user friendly interface with dedicated buttons and a rotary encoder (Quick-Set Knob). This combination drastically reduces the time it takes to measure, simulate, or source both voltage and current and power up a loop. The rugged ABS plastic case is contoured to easily fit a technician's hand and the large back lit graphics LCD is best in class. The LC-110H differs from the standard LC-110 in that it incorporates HART communications and supports a select set of the HART universal and common practice commands. This unique feature allows the LC-110H to be used as both a loop calibrator and communication tool.
-
product
Precision Lab Calibrator
3001
The Precision Lab Calibrator combines the power and features of the venerable M2001 lab calibrator, with the addition of an isolated measurement channel. This isolated measurement channel consists of two (2) voltage ranges: 10V and 100V DC, MilliAmp range 0 to 52 mA, MilliAmp range with simultaneous 24VDC power, selectable 250 Ohm HART resistor and accuracy of 0.005% of reading on voltage ranges.
-
product
Pressure Calibration Gauge
BetaGaugePI
The pressure calibration gauge combines the accuracy of digital technology with the simplicity of an analog gauge, and achieves performance, ease-of-use, and rich feature set.
-
product
Pressure Calibrator Modules
The Pressure Modules offers 25 standard pressure modules, covering gauge, vacuum, absolute, compound, and differential measurements.
-
product
Pressure Manometer
T-140
The pressure manometer is designed to give technicians the laboratory-grade accuracy in a rugged, easy-to-use instrument.
-
product
Process Calibrator
MC-1000
The MC-1000 Process Calibrator provides high accuracy calibration, common DMM functions including read and source thermocouples, RTDs, Ohms, current, pressure, frequency and test continuity. This single calibration instrument will calibrate virtually any process device including: read and source thermocouples, RTDs, Ohms, Voltage, Current, Frequency, Pressure, and test continuity.
-
product
RTD and Thermocouple Calibrator
PTC-8010
This RTD and Thermocouple Calibrator is an ideal device to handle all of your temperature calibration needs in a truly rugged, low-cost package. It combines virtually all widely used thermocouples and RTDs in one device - you'll never have to worry about finding a temperature device you can't calibrate. This is especially true when calibrating "smart" or pulsed RTD transmitters, where many other rtd calibrators fail to work or operate at reduced accuracy specs.
-
product
Single Sensor Pressure Calibrator
BetaGauge 301
The BetaGauge 301 Single Sensor Pressure Calibrator is a general purpose value oriented pressure calibrator. With one internal pressure range and an available adapter for external BetaPort-P pressure modules.
-
product
Temperature Pressure Calibrator
BetaGauge 321
The temperature pressure calibrator provides pressure measurement flexibility over any competitive unit. It provides 0.025% FS accuracy on both internal, isolated and stainless steel pressure sensors.
-
product
Thermocouple Calibrator
TC-100
The Thermocouple Calibrator provides high accuracy and measurement of ten common thermocouples, as well as mV.
-
product
Voltage Current Calibrator
IVC-222HPII
The Voltage Current Calibrator is a general purpose current and voltage source that can be used in engineering, manufacturing, test, and process control application.Four ranges: 200 mV, 2V, 20V, and 24 mA
