Torontech Group

We offer an extensive range of solutions and products for the testing and evaluation of various materials and products.

  • 1 416 368 2721
  • 1 416 981 7652
  • sales@torontech.com
  • 7030 Woodbine Ave
    Suite #500
    Markham, N L3R 6G2
    Canada

Filter Results By:

Products

Applications

Showing recent results 1 - 15 of 29 products found.

  • Air Entrainment Meter

    Torontech Group

    Air Entrainment meters from ToronTech™ are used to measure the air content of freshly mixed mortar in accordance with the air pressure compensation principle. The meter has a pressure chamber in which a predefined pressure is generated. When the overflow valve is opened, the pressure is compensated with respect to the test pot, which is filled with the freshly mixed mortar. The pressure drop is measured to give the air content in the mortar.

  • Sample Preparation Machine

    TT-Cut II - Torontech Group

    The Sample Preparation Machine - TT-Cut II is cost effective in motion control application of up to 3 axes. The motion control of the Sample Preparation Machine - TT-Cut II is based on numerical control Technology. The Sample Preparation Machine - TT-Cut II adopts a simple connectivity and a single commercially available USB cable is used for communication between the PC and control board which can be placed as per user preference. In addition to the above the Sample Preparation Machine - TT-Cut II is equipped with additional features like:

  • Sample Preparation Machine

    TT-Tensile Lathe II - Torontech Group

    The Sample Preparation Machine - TT-Tensile Lathe II is a Compact NC Lathe for the Sample Preparing of various metals and non metals. The motion control is based on numerical control Technology, which is programmable for a range of specimens. The Turret head and the tail stock features in the lathe enable to operate the machine for various purposes. The in build cover prevents the operator from dust and noise.The user friendliness of the controller restricts the need for a highly qualified operator for the machine operation. Emergency switches are provided to stop the machines in case of any emergency.

  • Sample Preparation Machine

    TT-Tensile Lathe I - Torontech Group

    The Sample Preparation Machine - TT-Tensile Lathe I is a Compact NC Lathe for various metals and non metals. The motion control is based on numerical control technology, which is programmable for a range of specimens. The Turret head and the tail stock features in the lathe enable to operate the machine for various purposes and the spindle can reach speeds of 4000 rpm. The built-in cover protects the operator from dust and noise.The controller is user friendly and does not require a highly qualified operator for machine operation. The machine is built with safety in mind and will halt all operation with the emergency switches provided.

  • Automatic Vicat Needle Apparatus

    Torontech Group

    Save time without sacrificing precision and accuracy! The Automatic Vicat Needle Apparatus - 6 Stations is used for testing materials that have no real melting points. The main principle is that it measures the temperature at which a flat ended needle is able to penetrate the sample. This is known as the softening point of the material. Without the input of an operator, this machine saves time without sacrificing precision and accuracy. The Automatic Vicat Needle Apparatus - 6 Stations is designed to automatically apply the force to the sample while it records the depth of the needle. Just press a button and wait for the results! This unit allows for further time saving by performing the same test 6 times simultaneously. The Automatic Vicat Needle Apparatus - 6 Stations is a PC-controlled unit equipped with software running on the Windows operating system. Tests are perform according to ASTM C191 standards:

  • Blaine Apparatus Air Permeability Tester

    Torontech Group

    Blaine Apparatus Air Permeability Tests can be done by any one of Torontech's Blaine test apparatus. We have several options to choose from included an automatic air permeability test apparatus, a manual air permeability test apparatus, a PC-controlled air permeability test apparatus. The Blaine air permeability tester is mainly used to measure the fineness of the cement, which in turn can be an indication of speed of setting and rate of strength development. The testing principle is based on the permeability of air through a sample under certain conditions. This is the ideal testing instrument for cement and concrete testing. We offer variety of Blaine systems fitting the needs of the industry.

  • Atomic Emission Analyzer

    Torontech Group

    Automatic Vicat needle unit is to determine the initial and final setting time of cement, mortar pastes and gypsum according to DIN 1164/ EN196/ BS 4550/ ASTM C187-191/ DIN 1168. The beginning and the end of the setting process is determined by the penetration behaviour of a steel needle into a cement paste sample, under certain specified conditions.

  • Scan Advanced Thickness Gauge

    MVX A / B - Torontech Group

    MVX is a full function A-Scan and B-Scan thickness gauge with a wide variety of modes and features for extra versatility.The adjustable square wave pulser provides the flexibility necessary for both high resolution and penetration requirements. The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in echo-echo mode.The time-based B-Scan feature of the MVX displays a cross-section of the test material. It is commonly used to display the profile of the bottom surface of the test material.

  • Storage Tank NDT System

    TT-F2000 - Torontech Group

    No couplant or magnets requiredMinimal floor preparationTests through coatingsMaximum penetration up to 1.25" (32mm)Scanning speed of 15-20 feet (4.5 - 6m) per minuteTests ferrous materials such as carbon steel and cast ironPC-based/Modular electronics using digital signal processingReal-time data display with advanced signal processingWheel assemblies provide easy maneuverability and independent height adjustmentFull coverage over scanned area with no "dead space"High resolution color graphics with 3-D displayUses a maximum voltage of 12V DC inside of tank, meeting required specifications for tank safetyLEDs with adjustable threshold provide a visual alarmElectronic & Software compatibility between F2000 Sr. & Jr.32 channels F2000 Sr.; 16 channels F2000 Jr.F2000 Jr. specially designed for hard to reach areas

  • Stress Relaxation Tester

    TT-SR Series - Torontech Group

    Torontech's Stress Relaxation Tester - TT-SR Series is used to determine stress-relaxation of metals, such as pre-stressed concrete strand, pre-stressed concrete bar, steel rope...etc. To determine stress-relaxation of a material the specimen is deformed a given amount and decrease in stress is recorded over prolonged period of exposure at constant elevated temperature.The Stress Relaxation Tester TT-SR Series complies with ASTM E328-02(2008) Standard Test Methods for Stress Relaxation Tests for Materials and Structures.

  • Constant Temperature & Humidity Chamber

    Torontech Group

    The Constant Temperature & Humidity Chamber is widely used in temperature variation tests, cold resistance tests, and also with low-temperature storage in the fields of aerospace, aviation, electronics, instrument, electric products, materials, parts and components and equipment to analyze and evaluate the property and performance of samples under the simulated conditions.

  • Concrete Cement Testing

    Torontech Group

    The solution calorimeter is a highly desirable piece of equipment. It is capable of handing cement analysis as most calorimeters are not able to test cement. It conforms to various different International standards and fits the use of any civil industry.

  • Temperature Test Chamber

    Torontech Group

    Fully complies to MIL-STD-810F, IEC 68-2- (3GB2423.3-93) and other Internation StandardsThe Temperature Test Chamber series is widely used in the temperature variation tests, cold resistance tests and storage with low-temperature in the fields of aerospace, aviation, electronics, instrument, electric products, materials, parts and components and equipment to analyze and evaluate the property and performance of the samples under the simulated conditions.

  • Ultra-Low Temperature Laboratory Freezer

    Torontech Group

    Ultra-Low Temperature Laboratory Freezers from ToronTech™ are based on the advanced refrigeration method of single-machine automatic cascade, which enables the freezers to drop the temperature to as low as -130°C, while enhancing the efficiency by 30%. Our Ultra-Low Temperature Laboratory Freezers meet the most stringent demands and are known for their quality and dependability in many fields. The freezers are ideally used in scientific research institutes, medical and health institutes, aviation & military, biological pharmacy, college research institutes of electronics, metal process, electronic industry, chemical industry, offshore fishing industry, and so on.

  • Ultrasonic Crawler System

    Model TT-V - Torontech Group

    The TT-V Crawler is an advanced, lightweight and modular crawler to carry Ultrasonic and Electromagnetic Technique equipment for inspections of vertical and horizontal metallic surfaces. By using permanent magnets, the TT-V can traverse up and down vertical and across horizontal surfaces with ease. A joystick allows steering for turn-on-a-dime maneuverability. The system supplies water to the optional Ultrasonic Transducer as a couplant for continuous thickness measurements.