NI
NI is a technology pioneer and leader in virtual instrumentation - a revolutionary concept that has changed the way engineers and scientists in industry, government, and academia approach measurement and automation.
- (512) 794-0100
- 11500 N Mopac Expwy
Austin, TX 78759-3504
United States
- FlexRIO Custom Instruments And Processing
- Cables
- Vehicle Communication Buses
- PXI Analog Input Module
- PXI Chassis
- CAN Interface Device
- Source Measure Units and LCR Meters
- PXI Strain/Bridge Input Module
- Frequency Counters
- PXIe-6593, 16 Gbps, 8-Channel PXI High-Speed Serial Instrument
- C Series Relay Output Module
- CompactDAQ Chassis
- Display Cable
- PXI Controllers
- PXI Multifunction I/O Module
- PXI Instrumentation
- PXI Serial Interface Module
- I²C/SPI Interface Device
- CompactRIO Controller
- C Series Sound And Vibration Input Module
- C Series CANopen Interface Module
- C Series Counter Input Module
- Terminal Block
- FlexRIO
- PXI Analog Output Module
- C Series Voltage Input Module
- C Series Current Input Module
- C Series Temperature Input Module
- LIN Interface Module
- Serial Interface Device
- Frame Grabber Device
- Oscilloscopes And Digitizers
- Transceiver Adapter Module For FlexRIO
- Camera Link Adapter Module For FlexRIO
- PXI Digital I/O Module
- PXI GPIB Instrument Control Module
- Multifunction I/O Device
- C Series Universal Analog Input Module
- C Series Voltage And Current Input Module
- Expansion Module For CompactRIO
- Temperature Input Device
- PXI CAN Interface Module
- PXI Electronic Load Module
-
product
DB37M-DB37F-EP, 37-Pin Shielded Cable - 4 AI, 4 AO, 10 DIO
193737-01
DB37M-DB37F-EP, 37-Pin Shielded Cable - 4 AI, 4 AO, 10 DIO
-
product
PXIe-6535, 32-Channel, 10 MHz, 40 MB/s PXI Digital I/O Module
780695-01
32-Channel, 10 MHz, 40 MB/s PXI Digital I/O Module—The PXIe‑6535 can continuously stream data over the PXI Express bus. It's an ideal solution for interfacing and testing image sensors or display panels. The module is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing. It features selectable voltage levels and per-channel directional control of the digital lines.
-
product
PXI FlexRIO Digitizer
PXI FlexRIO Digitizers feature high-performance analog-to-digital converters with lightweight analog front-ends designed to maximize sample rate, bandwidth, and dynamic range. These modules use FPGAs from Xilinx alongside LabVIEW and Vivado programming options for custom algorithm implementation and real-time signal processing. For applications that require high channel counts, PXI FlexRIO Digitizers use the NI-TClk API and the timing and synchronization capabilities of PXI to achieve sub-sample...show more -
product
Digitizer Adapter Module For FlexRIO
Digitizer Adapter Modules for FlexRIO can be used with a PXI FPGA Module for FlexRIO or the Controller for FlexRIO to create a high‐performance instrument with customizable firmware. With sampling rates from 40 MS/s to 3 GS/s and up to 32 channels, these modules cover a wide range of requirements for both time- and frequency‐domain applications. Digitizer adapter modules also provide digital I/O capability for interfacing with external hardware.
-
product
CC30100X, 100 MHz, 30 Arms Current Oscilloscope Probe
785562-01
The CC30100X, or Hioki 3276, is a clamp-on current probe that offers a wide DC to 100 MHz bandwidth and 30 Arms of continuous input. It is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers. The probe requires an external power supply.
-
product
TRC-8543, CAN HS/FD or LS/FT Transceiver Cable
783701-02
CAN HS/FD or LS/FT Transceiver Cable—The TRC-8543 is designed to provide flexibility in connecting a CAN bus to the NI-9860, PXIe-8510, and/or the native NI-XNET port on a cDAQ-9134 or cDAQ-9135 controller. You can connect the TRC-8543 to the port to support a CAN HS/FD or LS/FT interface. The TRC-8543 is an isolated cable that includes the necessary transceiver for the bus type. It also features termination resistors that you can enable or disable in software.
-
product
SH68M-68M-EPM, 68-Pin Male VHDCI to 68-Pin Male VHDCI, Twisted Pair, Shielded Multifunction Cable
190233-0R5
68-Pin Male VHDCI to 68-Pin Male VHDCI, Twisted Pair, Shielded Multifunction Cable - The SH68M-68M-EPM Cable, sometimes referred to as SHC68-C68-EPM, connects DAQ devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog
-
product
SMA Male to SMA Male Cable, 50 Ohm, 12.7 cm
763443-01
The SMA-SMA Coaxial Cable, sometimes referred to as SMA100, connects measurement and signal devices. NI offers this 50 Ω cable in different lengths.
-
product
PXI-2722,16-Bit, 5-Channel PXI Programmable Resistor Module
781985-22
16-Bit, 5-Channel PXI Programmable Resistor Module—The PXI‑2722 is a test module that replicates the behavior of resistance-based inputs and outputs such as potentiometers, resistance temperature detectors (RTDs), voltage dividers, and bridge elements. The PXI‑2722 programmatically controls a series of relays to vary the resistance across each channel of an I/O connector. This function is well suited for simulating environmental conditions in hardware‑in‑the‑loop (HIL) validation. The software provides a simple user interface that accepts inputs in units of temperature or resistance and configures the resistance across each channel.
-
product
Vehicle Communication Buses
Vehicle Communication Buses provide native support for Controller Area Network (CAN), Local Interconnect Network (LIN), and FlexRay frames and signals. Use these products for hardware-in-the-loop simulation, bus monitoring, automation control, and more.
-
product
SHC68M-68F-RMIO, 68-Pin Male VHDCI to 68-Pin Female D-SUB, Shielded Multifunction Cable, 2m
189588-02
68-Pin Male VHDCI to 68-Pin Female D-SUB, Shielded Multifunction Cable - The SHC68M-68F-RMIO Cable, sometimes referred to as SHC68-68-RMIO, connects to the terminal block of a multifunction reconfigurable I/O (RIO) device. The SHC68M-68F-RMIO Cable is offered in different lengths.
-
product
SH68M-68M-EPM, 68-Pin Male VHDCI to 68-Pin Male VHDCI, Twisted Pair, Shielded Multifunction Cable
190233-02
68-Pin Male VHDCI to 68-Pin Male VHDCI, Twisted Pair, Shielded Multifunction Cable - The SH68M-68M-EPM Cable, sometimes referred to as SHC68-C68-EPM, connects DAQ devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog … inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. The SH68M-68M-EPM Cable is offered in different lengths.
-
product
NI-9220, ±10 V, 100 kS/s/ch, 16-Bit, Simultaneous Input, 16-Channel C Series Voltage Input Modul
782615-01
±10 V, 100 kS/s/ch, 16-Bit, Simultaneous Input, 16-Channel C Series Voltage Input Module - The NI‑9220 performs simultaneous differential analog inputs with 250 Vrms CAT II or 60 VDC CAT I isolation. The module is capable of generating 3.2 MB/s of data at … the maximum sampling rate. There are two connector options for the NI‑9220: a 36-position spring-terminal connector and a 37‑position D‑SUB connector.
-
product
PXI-2520, 80-Channel, 2 A, SPST PXI Relay Module
778572-20
80-Channel, 2 A, SPST PXI Relay Module—The PXI‑2520 is a general-purpose switch module that features independent single‑pole single‑throw (SPST) Form A armature relays. Each relay is nonlatching with very low on-resistance and low thermal offsets. The PXI‑2520 is fully software programmable, and it supports onboard relay count tracking. With an efficient coupling of voltage/current capability and relay density, this switch module is ideal for automated test equipment (ATE) loads or for controlling heaters, lights, and fans.
-
product
PXI Synchronization Module
PXI Synchronization Modules use the trigger bus, star trigger, and system reference clock features of PXI to implement advanced multi-device synchronization. By using PXI Synchronization Modules, you can improve measurement accuracy, implement advanced triggering schemes, and synchronize multiple devices to act as one for high-channel-count applications.
Parent
-
Emerson Electric Co.
Manufactures products and provides engineering services for industrial, commercial, and consumer markets.
Siblings
-
Greenlee Tools
Headquartered in Rockford, Illinois, Greenlee® is an industry leader in developing innovative and ergonomic tools as the solution to help professionals tackle any job. For over 150 years, Greenlee has been elevating the industry standards by designing products that can help create better and safer work practices. From woodworking and barrel-making beginnings to the present day selection of Power Tools and Accessories, Hand Tools, Knockouts, Wire and Cable Fishing/Pulling/Termination, Bending, Electrical Test and Measurement, and other solutions, Greenlee’s products are designed to increase productivity and help finish jobs safely, consistently and reliably. Greenlee is a subsidiary of Emerson’s Professional Tools business that also includes the RIDGID® and Klauke® brands, collectively providing the industry’s broadest portfolio of advanced, reliable tools and technologies for the mechanical, electrical and plumbing trades globally.
Siblings
-
Digilent Inc.
Digilent (an NI company) has created hardware and software to allow engineers, researchers, and scientists flexibility to design rapidly and test the world around them. Our customizable solutions will accelerate development time for even the most experienced professionals, while maintaining low barrier to entry for advancing engineers.
Siblings
-
Emerson Rosemount
Emerson's tireless pursuit of innovation drives the Rosemount™ portfolio of superior quality measurement and analytical technologies to provide customers with insight across all touch points needed to operate efficiently, safely, and with peace of mind.
Children
-
Phase Matrix, Inc
Phase Matrix, Inc. designs and manufactures RF and microwave test-and-measurement (T&M) instruments and is a wholly owned subsidiary of National Instruments Corp. Our array of instruments includes traditional benchtop frequency counters, modular (VXI) pulsed-frequency counters, modular (VXI and PXI) synthetic instruments, including downconverters, upconverters/synthesizers and local oscillators that are designed for both commercial and military applications.
Children
-
Kistler Instrument Corp.
Kistler develops, manufactures and distributes sensors for measuring pressure, force, torque and acceleration, as well as electronics and software.
Children
-
Optimal+
Provides the semiconductor industry with unique and automated test management software tools to improve global and distributed test operations, quality, reliability, utilization and yield.
Children
-
NH Research, Inc.
NH Research (NHR) enables electrification by accelerating innovation, validation and functional test of today’s technologies. Backed by over 50 years of experience in power conversion and electrification test systems NHR provides world class test instruments and systems for a wide range of industries. NHR solutions provide performance and safety that engineers and researchers desire to reduce test time and increase energy savings of their test systems. NHR was acquired by NI in 2021. Together, NHR and NI offer more complete and open electrification solutions to optimize test workflows and accelerate time to market for our customers.
Children
-
VI Control Systems Ltd.
VI Control Systems offers years of experience in software and hardware development of controls for complex systems such as linear accelerators and pulse-power systems, data acquisition in difficult environments and sophisticated data analysis.
Children
-
SET GmbH
Die SET GmbH ist Ihr Spezialist und Partner für die Entwicklung im Bereich Luftfahrt-Elektronik, sowie System-, Mess- und Steuerungstechnik.
Children
-
MFJ Enterprises, Inc.
Manufacture's 1000 different ham radio products including products from Ameritron, HyGain, Mirage and Vectronics.
Related
-
Virginia Panel Corporation
Virginia Panel Corporation (VPC) provides VPC provides Interconnect Solutions that enable simultaneous connection of multiple test and measurement signal types through one modular interface. Designed to accommodate signal, power, RF, thermocouple, pneumatic/vacuum, and fiber optic connector modules in multiple configurations, VPC’s innovative products meet the demands of test & measurement interconnect requirements.
-
ADVINT, LLC
ADVINT is a leader in design and build of automatic test systems for military and commercial applications. We are a full-service system integrator that provides hardware/software development and complete fabrication services. We supply cost-effective rapid system development with unsurpassed customer responsiveness. Consultation to complete turnkey solutions available.
-
Lake Shore Cryotronics, Inc.
Supporting advanced scientific research, Lake Shore is a leading global innovator in measurement and control solutions.
