Since 1999, TEAM SOLUTIONS, INC. has provided state-of-the-art PC-based, test and measurement (T&M), data acquisition (DAQ), plus GPIB monitoring and control instruments. TEAM’s products are offered in ISA, PC/104, PCI-104 (AKA: PC/104Plus), PCI, PCI-express, CardBus/PCMCIA, Ethernet, LPT/Parallel-port, USB (1.1, 2.0, 3.0), and CompactPCI/PXI (3U) configurations.

  • (949)338-8078
  • (949)495-4648
  • 30322 Grande Vista Ave
    Laguna Niguel, CA 92677

Filter Results By:



Showing results 46 - 60 of 75 products found.

  • TiePieSCOPE 2 Channel, 1 GS/s, 250MHz BW, USB Multi-Instrument


    The TiePieSCOPE HS805 is a portable USB oscilloscope that combines a high sampling speed (1 GSamples/s on one channel, 500 MSamples/sec on two channels) with a long record of 32 MiSamples per channel. That allows you to capture long, complex signal patterns at full speed. The 250 MHz high bandwidth ensures that the signals are measured accurately and without distortion.

  • Digital Input and Output Board


    32 bit, 33 MHz, PCI interface Input channels 32 isolated digital input channels, 24 V, incl. 16 interruptible and 3 fast counter inputs Input channels organised in 4 groups of 8 channels, each group has its own ground line Voltage reversal protection All inputs are filtered Output channels 32 isolated digital output channels, 10 to 36 V Output current per channel 500 mA Watchdog for resetting the outputs to "0" After power/ON the outputs are reset to 0 Short-circuit current for 16 outputs ~ 3 A Short-circuit current for 32 outputs ~ 6 A Short-circuit current per output ~1.5 A Electronic fuse Overtemperature and overvoltage protection 24 V power outputs with protection diodes and filters Special output capacitors minimise electromagnetic emissions External 24 V supply screened through a protection circuitry Shutdown logic when the external supply voltage drops unter 5 V Safety features Optical isolation 1000 V Creeping distance: 3.2 mm acc. to DIN VDE 0411-100 Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI Interrupt triggered through watchdog, counter, timer, error Separate grounds for input and output channels Noise immunity Test level: ESD: 4 kV Fields: 10 V/m Burst: 4 kV Cond. radio interferences: 10

  • Output Board

    APCI-2200-8-8 - TEAM SOLUTIONS, INC.

    8 relay output channelsSwitching voltage 60 V/DC, 48 V/AC, switching current 1 A8 digital input channels, 24 VOptical isolationWatchdogEasy programming

  • 10MHz 2 Channel USB Oscilloscope Multi-Instrument


    HandyScope 3: 10 MHz, 2 Channel, USB Multi-Instrument (DSO, AWG, Spectrum Analyzer, Voltmeter, Transient Recorder). The Handyscope-3 is a powerful computer controlled measuring instrument that consists of four measuring instruments: a Voltmeter, Oscilloscope, Spectrum analyzer and Transient recorder. Also an AWG (Arbitrary Waveform Generator) is available.

  • USB Hi-Res Digital Storage Oscilloscope


    1. Up to 7x faster H/W initial time!2. An additional reference clock input port to synchronize multiple-stacked DSOs!3. TS2212H has twice the vertical resolution at 16-bits maximum! PC-based (USB2.0 interface) USB powered 2 channels (stackable up to 12 channels) 1 GS/s real-time sampling 200 MHz bandwidth 10K (TS2202)/64M (TS2212) points per channel Vertical offset adjustable Edge, External , Width, Video/TV Trigger B-Trigger, Delay, Logic, Runt, Serial Bus, Setup/Hold, Slew, Timeout Trigger (TS22x2B/H Only) LF reject, HF reject, Noise reject RUN/STOP hardware button Export data to WORD, EXCEL, TEXT, HTML, MATLAB etc. Data Logger (HD storage) Embedded 2-channels FG with Modulation, Sweep, Burst function

  • Digital I/O Board


    The following standard drivers are supplied with the board:(API : Application Program Interface = function library Windows NT 4.0(and 3.51) ? API as 32-bit DLL + SYS driver ? Samples:BC++5.0, VC++5.0, VB5.0, Delphi 2.0 Windows 95: ? API as 32-bit DLL + VXD driver ? Samples:BC++5.0, VC++5.0, VB5.0, Delphi 2.0 Windows 3.11: ? API as 16-bit DLL ? Samples:BC Easy Win , Delphi 1.0,VB40 16-bit

  • Multifunction board


    The APCI-3110 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3110, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filter and it is protected against high frequency emmission. With the free calibration tool you can do the fine adjustment on-site.

  • 8-Channel Relay Output Board


    The PX8500 is an external 8-channel relay board for the connection of digital output boards. It can be cascaded in 16, 24 and 32 relays and is intended for mounting on DIN supporting rails. The board provides a convenient interface between an industrial process and the SUB-D connectors on ADDI-DATA boards. The change-over contacts of the relay are controlled through 24 V signals. The 24 V voltage supply is protected through varistors and transil diodes. The board is intended for the use with 220 V supply. The creeping distance (acc. to DIN VDE0110) and the connector cross sections allows high-power switching (up to 2,500 VA).The board has a female SUB-D connector for connecting an ADDI-DATA digital 24 V output board through a standard I/O cable ST010. The red LEDs display the state of the relays (open/closed). A green LED displays the ON/OFF of the operating voltage. The 37-pin cable shielded can be grounded on both sides for the protection against high-frequency EMI.

  • USB Logic Analyzer plus 8-channel Pattern Generator


    A maximum sampling rate of 1 GHz is available on all channels. The LA-Gold-36 has a large data buffer of 1 Mega samples per channel for sampling rates of up to 500 MHz on all 32 channels. The large buffer allows long capture times at high sampling rates. The digital logger function is for capturing very slow varying signals, e.g. room temperature.

  • Isolated Analog Input Board


    8 single-ended or 4 differential inputs 12-bit resolution Optical isolation 500 V 100 kHz data transfer rate Automatic analog acquisition 8 digital I/O, 24 V, isolated, timer Trigger functions Graphical display of the measured data.

  • Isolated Differential Analog Input Board


    Analog input board, 16-bit resolution, 16 differential inputs with 200 kHz sampling rate.4 digital inputs, 4 digital outputs, 24 V, optically isolated, timerFilter and current inputs: Option DF, Option PC-Diff. See "Accessories"

  • PCI-to-CardBus/PCMCIA/PC-Card Adapter, 1-slot


    Dual Slot Internal and external also available.The P111 is perfect for use with Wireless LAN cards like WiFi / 802.11b or any of the newly emerging 802.11a or 802.11g standards. It also suits Bluetooth cards or other functions where the ability to occasionally remove the card is important, but where during normal use the rear facing aspect of the slot suits its operation.

  • Isolated Analog Input Board


    4 single-ended or 2 differential inputs 12-bit resolution Optical isolation 500 V 100 kHz data transfer rate Automatic analog acquisition 8 digital I/O, 24 V, isolated, timer Trigger functions Graphical display of the measured data

  • USB Digital Storage Oscilloscope, 1GS/s, 200MHz BW, 64M/channel

    Acute TS2212A - TEAM SOLUTIONS, INC.

    PC-based (USB2.0 interface) USB powered (2 USB ports needed for TS2212A) 2 channels (stackable up to 6 channels) 1 GS/s real-time sampling 200 MHz bandwidth 64M points per channel Vertical offset adjustable Width, Video/TV, Delay, Runt, Pattern, External Trigger LF reject, HF reject, Noise reject RUN/STOP hardware button Export data to WORD, EXCEL, TEXT, HTML, etc. Data Logger (HD storage) Embedded 2-channels FG with Modulation, Sweep, Burst function

  • Single Port RS232 Serial Communications Compact Flash Card


    The CF232 is a tiny Type I format Compact Flash (CF+) single RS232 asynchronous serial port for your PDA, laptop (with an optional adapter), or desktop (using one of Elan's Desktop PCMCIA adapters). The card automatically configures to become another COM port by using the built-in O.S. drivers that are tried and tested and are optimized to work in the Windows environment.