M.E.A. Testing Systems Ltd.

MEA has revolutionized the field of motor and appliance testing.

  • 972-9-8858989
  • 972-9-8858985
  • sales@meatesting.com
  • 4 Hagavish St., Poleg Industrial Park
    P.O.B 8745
    Netanya, 42504
    Israel

Filter Results By:

Products

Applications

Showing recent results 1 - 15 of 26 products found.

  • Bearing Testers

    Anderon Meters - M.E.A. Testing Systems Ltd.

    *Measures the anderon value in an assembled bearing.*Detects slight surface irregularities arising from machining imperfections and other factors.*Detects displacement in a radial direction caused by rolling surface irregularities.*Provides the “anderon” value, a numerical expression of the degree of vibration and noise in the bearing, allows quantitative assessment of bearing performance.*Enables the discovery of the causes of vibrations (scratches on the raceways of outer and inner races made during machining, scratches on ball surfaces, contamination by dust particles, etc.).*Enables the sorting of bearings by precision class and more accurate assessment of bearing quality.*Development of high-quality products: aids in the development of high-quality, durable bearings that generate minimal vibration and noise.*Assurance of product quality: allows data to be gathered that can be used for objective assessment of quality, particularly vibration and noise characteristics.*Optimal management of products by quality: High-sensitivity detection of minute but critical variations in product characteristics, allowing to sort bearings accurately by quality for optimal product management.*Improved productivity: allows inspection of bearings before installation in high-precision, high-performance products susceptible to vibration, minimizing defects in assembled products and improving productivity.*Optimal parts control in the open market environment: permits high-accuracy acceptance inspections of delivered parts, allowing to test various samples obtained from both domestic and overseas manufacturers to help secure parts that offer optimal quality.

  • Compressor Tester

    M.E.A. Testing Systems Ltd.

    Full load performance from stall up to no-load, without coupling to external load, including: torque, speed, current, auxiliary current, main current, voltage, capacitor voltage,input power, output power, power factor, motor efficiency,direction of rotation.

  • EOL Testing Systems

    M.E.A. Testing Systems Ltd.

    *Test procedure is based on the motor’s voltage and current.*Test procedure measures all of the motor characteristics, from stall up to no load speed, in just a few seconds.*NO loading of the motor is necessary.*NO sensor is required for DCPM motors.*COMPLETE test performance in just a few seconds of running the motor. *Performs QA testing on 100% of production, without compromising line throughput (up to 10 motors per minute), reducing costs of defective products. *Determines acceptability to user predefined PASS/FAIL limits on production lines.*Detects electrical and mechanical defects according to: -Full load performance without coupling to external load and without addition any sensor on the motor shaft (torque, speed, current, voltage, input power, output power, and motor efficiency, from stall up to no-load). -Real-time results. -Friction torque, friction output power.*Possibilities for: AC, DC Hipot & Insulation Resistance.*Adjustable to test various motor types on single system.*Flexible to production changes with minimum expenses.

  • EV and Traction Motor Testing & Simulation Test System

    M.E.A. Testing Systems Ltd.

    High Speed EV Motor - Unique Testing capabilities (MEA patented Inertial Dynamometer)Complete load testing of high speed EV motors (for example: 75kW, 32000 rpm)Load testing without connecting the EV motor to any mechanical loadRipple Torque, Friction Torque, Friction Spectrum, Speed & Torque Spectrum, Back EMF

  • Fan Tester

    M.E.A. Testing Systems Ltd.

    Analysis of real-time behavior of fan systems, including the fan's load curve. Without connecting to any sensor, provides:fan's load curve, input and output performance of the fan's nominal working point, friction and mechanical defect testing.

  • FFT Analyzer and Motion Analyzer

    M.E.A. Testing Systems Ltd.

    Motion analysis of real-time behavior of rotating/moving systems.

  • Friction Analyzer

    M.E.A. Testing Systems Ltd.

    Friction analysis for predictive maintenance without coupling to any encoder or external load. Provides dynamic performance tests data, including: speed and torque spectrum, friction torque and friction spectrum.

  • Heavy Duty Fan Tester

    M.E.A. Testing Systems Ltd.

    Analysis of real-time behavior of fan systems, including the heavy duty fan's load curve. Without connecting to any sensor, provides: heavy duty fan's load curve, input and output performance of the heavy duty fan's nominal working point, friction and mechanical defect testing.

  • Hysteresis Brake Dynamometer

    M.E.A. Testing Systems Ltd.

    *Uses Hysteresis brake for measurement devicesIn addition to minimizing the magnetic field aperture in which the hysteresis cup rotates, this component minimizes the cup’s moment of inertia, enabling improved torque-control precision and controlling vibrations at high RPMs.*Enables stable measurements from low through high RPMsTorque is detected by the force exerted by the brake stator, enabling stable torque measurements from low through high RPM rages. This component features a maximum speed of 30,000 rpm (depending on torque rating). In addition, optional components can be used to improve speed resolution for use with low-speed motors of 100 rpm or less.*Compatible with broad range of torque ratings from 5mN*m through 50 N*mMeasurements components can be selected to suit motor power to ensure high-precision measurements. Users can select from 14 models of TA/TB torque measurement components, offering differing torque ratings.*Long-lasting non-contact brake Hysteresis brakes are non-contact devices and offer long service life. Except for bearings, hysteresis brakes have virtually no maintenance requirements.*Superior heat resistanceAnother hysteresis brake advantage is its resistance to changes in torque values due to increases in brake temperature or surrounding temperature.

  • Motor Test for Electric Scooters

    M.E.A. Testing Systems Ltd.

    *The performance data of electric motors, in the majority of all cases, is performed by a brake test. Power input is calculated from current and voltage. Torque and power output are measured with a brake. It is important to reach, for each point, a persistent temperature. In case of large outer rotor BLDC motors, which are usually used for electric scooters, this traditional procedure may take many hours to complete, and is very complicated. *For several years, an innovative motor tester of MEA Testing Systems Ltd. is on the market. This testing system avoids any temperature confusion by testing a motor at constant temperature over the entire speed range. The test procedure is very fast, and gives the full load performances, including PWM current, voltage, torque, and driver efficiency, from stall up to no load. *During the test procedure, the motor is freely accelerated from stall to no load speed. The load of the motor is only the predetermined inertia of the rotor. From the moment of inertia and the acceleration, the torque of the motor is calculated and, also, the power output over the whole speed is given. Since the entire measuring time, depending on the motor size, is usually less than one second, the motor has no time to warm up. It remains at room temperature.

  • Motor Test for Stepping Motors

    M.E.A. Testing Systems Ltd.

    *Stable measurement: Since it uses Prony braking, this model provides stable measurement unaffected by moments of inertia and no coupling loss. In addition, the resulting measurements allow data correlation via the traditional double-balance method.*Precision measurement method: This model’s judgment of synchronization loss achieves high stability using algorithms developed by Sugawara Laboratories. Measurement mode can be chosen based on step angle. For pull-in torque, startup can be measured consistently from the holding state. Allows measurement at 1-Hz resolution.*Broad measurement range: This model offers a range of seven available measurement heads, from 0.5 N to 50 N, allowing use for high-precision measurements. Through selection and use of pulleys, this model can also be used to measure small motors of 0.5 mN·m or less or 500 mN·m motors. Pulley diameters and other settings are easily configured using a personal computer running Windows®. Note: Any of the seven available heads may be attached to a single measurement component.*High-visibility measurement data: Motor characteristics are easily ascertained on automatically plotted performance graphs. Measurement data can be overlaid up to four times. In addition, the cursor can be used to read accurate values from measurement points. Hard copies of data displayed on-screen can be printed from a personal computer.*Can be controlled using standard personal computers: Allows control of measurement operations and display and storage of data from a standard personal computer running Windows®. Data is stored in CSV-format files for compatibility with other software applications.

  • Motor Testing Equipment

    BLDC Motors - M.E.A. Testing Systems Ltd.

    M.E.A. Inertial Dynamometers test easily and accurately the performance of any Brushless motor. The supported range of motors is almost unlimited (torque range is unlimited, speed range 5-60,000 rpm).

  • Motor Testing Equipment for EOL- AC Motors

    M.E.A. Testing Systems Ltd.

    Whether it’s manual or fully automatic, each M.E.A. Inertial Dynamometer device for assembly/production line is a customized solution adapted to the customer’s full needs.

  • Motor Testing Equipment for EOL- BLDC (Brushless) Motors

    MotorLine® - MLI-B - M.E.A. Testing Systems Ltd.

    *Performs QA testing on 100% of production without compromising line throughput (up to 10 motors per minute), reducing costs of defective products.*Determines acceptability to user predefined PASS/FAIL limits on production lines.*Provides motor performance data, from stall up to no-load, within seconds, including: torque, speed, current, voltage, input power, output power, time, motor efficiency, driver efficiency, direction of rotation.*Provides dynamic performance tests data, including: speed and torque spectrum, speed and torque oscillations, friction torque, friction spectrum, friction output power, cogging torque level.*Supports non-contact frictionless sensors.*Supports motor’s internal speed sensors.*Support sensorless BLDC motors.*Speed range up to 250,000 rpm.*Motor power switching is done by the motor electronics; the data sampling is started while the motor starts moving.*Motors can be tested inside their applications.*Motor performance data can be recorded in the system database for comparison and statistical analysis.*Test results are provided graphically and tabulated.*Test reports in PDF and Excel format.*Capability for integration with third party devices, such as hipot & insulation resistance testers.

  • Motor Testing Equipment for EOL- DC Brush Motors

    MotorLine® - MLI-D - M.E.A. Testing Systems Ltd.

    *Performs QA testing on 100% of production without compromising line throughput (up to 10 motors per minute), reducing costs of defective products.*Determines acceptability to user predefined PASS/FAIL limits on production lines.*Provides motor performance data, from stall up to no-load, within seconds, including: torque, speed, current, voltage, input power, output power, time, efficiency, direction of rotation.· Provides dynamic performance tests data, including:speed and torque spectrum, speed and torque oscillations, friction torque, friction spectrum,friction output power, cogging torque level.· Motor performance data can be recorded in the system database for comparison and statistical analysis.· Motor power switching is done automatically by the system.· Motors can be tested inside their applications.· Test results are provided graphically and tabulated.· Test reports in PDF and Excel format.· Capability for integration with third party devices, such as hipot & insulation resistance testers.· System is customized to suit specific requirements.· Supports non-contact frictionless sensors.