Mensor Corp.

product

Digital Barometers

Mensor Corp.

Mensor Corp.

Barometric pressure instruments measure the ambient atmospheric pressure and are used in manufacturing, process control, aerospace, geoscience, calibration and a host of other applications where  ambient pressure is a factor in the results of tests, adjustments or calibration of components.  Mensor barometric references provide the highest level of accuracy in critical applications.

product

Hand-helds

Mensor Corp.

Mensor Corp.

Hand-helds are portable calibration instruments for mobile use for the accurate measurement and recording of temperature profiles. For the instruments there are various designs of thermometers available. Through this, hand-helds are particularly suitable as test instruments for a large variety of applications in the widest range of industries. Data recorded in the hand-held can be evaluated via PC software. Some instruments document calibrations in the internal memory, which can later be read on a PC. Optionally, a calibration certificate can be generated with our calibration software WIKA-CAL.

product

Hand-helds, Calibrators

Mensor Corp.

Mensor Corp.

Hand-helds are portable calibration instruments for mobile use for the accurate measurement and recording of pressure profiles. There are interchangeable pressure sensors with measuring ranges of up to 8,000 bar available for the instruments. Through this, hand-helds are particularly suitable as test instruments for a large variety of applications in the widest range of industries. Data recorded in the hand-held can be evaluated via PC software. Some instruments document calibrations in the internal memory, which can later be read on a PC. Optionally, a calibration certificate can be generated with our calibration software WIKA-CAL.

product

Pressure Pump / Vacuum Pump

Model Model 82

Mensor Corp.

Model Model 82 - Mensor Corp.

The Mensor Model 82 is a pump and/or compressor set that complements a pressure controller and fits on or under a bench, in a rack, or on a table.   The compressor is an oil-less pump with a maximum pressure of 50 psi with a open flow of 1.5 cfm.  The vacuum pump is also oil-less and can achieve 28.5 inHG of vacuum with an open flow of 0.8 cfm.  In avionics terms, this set is capable of 60,000 feet of altitude and airspeeds in excess of 1000 knots.  Both units are shock mounted to reduce noise and vibration.   Each unit has a power switch/breaker and can be run independently. This same configuration can also be produced in a standard 19 inch, 4U (7” high) rack mount chassis or desktop version.

product

Reference Thermometers

Mensor Corp.

Mensor Corp.

Reference thermometers (standard thermometers) are, due to their excellent stability and their geometrical adaptations, ideally suited for applications in industrial laboratories. They enable easy comparative calibration in baths, in tube furnaces and in dry-well calibrators. The advantage of reference thermometers is the wide temperature range, and with this, their flexible operation. Furthermore, with their low drift, a long service life is ensured.

product

Air Data

Mensor Corp.

Mensor Corp.

Testing altitude and airspeed components in commercial and military air data applications are critical for the safety and performance of an aircraft. Mensor air data test set and indicators provide the high accuracy necessary for these applications. Air Data Test Sets control altitude /altitude rate and airspeed /airspeed rate, for testing altimeters and airspeed indicators or air data computers in a dynamic way that simulates actual flying conditions. Air data Indicators measure Altitude /Altitude Rate and Airspeed /Airspeed Rate for applications where conditions are externally controlled.

product

Calibration Baths

Mensor Corp.

Mensor Corp.

Calibration baths are electronic controllers which automatically, quickly and with the help of a liquid supply a temperature Due to the high reliability, accuracy and exceptional homogeneity in the measuring chamber, calibration baths are particularly suitable as a factory/working standard for the automatic testing and/or calibration of the widest range of temperature probes − independent of diameter. A special micro calibration bath design enables on-site applications.

product

Resistance Thermometry Bridges

Mensor Corp.

Mensor Corp.

By using built-in or external standard resistors, resistance thermometry bridges measure resistance ratios with high accuracy, which are indicative of the temperature, among other things. These instruments are not only used in the field of temperature measurement, but − due to their high accuracy − also in electrical laboratories.

product

Digital Pressure Gauge

Mensor Corp.

Mensor Corp.

Precision digital pressure gauges are suitable for stationary and also mobile measurement and display of pressures. In addition, a digital pressure gauge can be used as a pressure reference and enables the easy testing, adjustment and calibration of other pressure measuring equipment directly on site. Through efficient measuring cells with electronic linearisation of the characteristic curve, a high accuracy is achieved.

product

Current, Voltage, Resistance

Mensor Corp.

Mensor Corp.

Solutions for the testing and calibration of current, voltage and resistance are used in industry (laboratories, production, workshops), in calibration service companies and in quality assurance. These instruments are portable and mobile and are particularly notable for their low measurement uncertainty and high scope of operation.

product

Custom Instruments

Mensor Corp.

Mensor Corp.

Mensor provides custom instruments such as high speed or high volume pressure controllers to meet specific customer requirements.These custom instruments are used to deliver pressure in high speed production environments and high volume testing applications.

product

Pressure Controllers

Mensor Corp.

Mensor Corp.

Pressure controllers are electronic controllers which quickly and automatically provide a pressure based on a supply pressure. Due to the high accuracy and control stability, pressure controllers are especially suitable as references for production lines and laboratories, in order to carry out automatic testing and/or calibration of all types of sensors.

product

Precision Pressure Transducers

Mensor Corp.

Mensor Corp.

Precision pressure transducers convert pressure into an analog or digital signal proportional to the pressure being sensed. Precision pressure transducers (sometimes called transmitters) are used to monitor and or control sensitive pressure processes. They can also be used as high accuracy transfer standards or as a factory working standard for testing or calibrating a variety of pressure measuring instruments. With an accuracy as high as 0.008 % of reading, these pressure transducers can be found in laboratories or in production environments where a high degree of precision and accuracy are required. Each transducer is calibrated in Mensor's 17025, A2LA certified laboratory.

product

Portable Temperature Calibrators

Mensor Corp.

Mensor Corp.

Portable temperature calibrators (dry-well calibrators) are electronic controllers which automatically, quickly and dryly supply a temperature. Due to the high reliability, accuracy and simple operation, portable temperature calibrators are particularly suitable as a factory/working standard for the automatic testing and/or calibration of temperature measuring instruments of all types. A major advantage is offered by the large sleeve diameters and the fast, stable temperature control, since, as a result of these characteristics, the time for calibration can be used very effectively.

product

Pressure Generators

Mensor Corp.

Mensor Corp.

Test pumps serve as pressure generators for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These pressure tests can take place in the laboratory or workshop, or on site at the measuring point.