Keysight Technologies

Choosing the right electronic measurement equipment is an important decision which requires consideration about features, specifications, performance, and total cost of ownership. The Keysight Edge provides the insight to make the best investment decision for your application, operation, and business. Take a few moments to understand why looking beyond product price is a critical step in choosing your test & measurement solution.

  • 1 800 829-4444
  • 1 800 829-4433
  • usa_orders@keysight.com
  • 1400 Fountaingrove Parkway
    Santa Rosa, CA 95403-1738
    United States

Filter Results By:

Products

Applications

Showing recent results 1636 - 1650 of 2133 products found.

  • USB Coaxial Switch, DC to 26.5 GHz Dual SP6T

    U1816C - Keysight Technologies

    The Keysight U1816C is a switch matrix that consists of two single-pole-six-throw (SP6T) switches. It allows switching of multiple signal paths without physically changing the connections. This allows multiple tests to be performed with the same setup, eliminating the need for frequent connects and disconnects. An entire testing process can be automated, increasing the throughput in high-volume production environments.

  • LXI-Compliant Attenuator/Switch Driver

    11713C - Keysight Technologies

    The Keysight LXI-compliant 11713C attenuator/switch driver provides remote or front-panel drive control for 4 programmable attenuators and 4 SPDT switches. The Keysight 11713C can also be used to independently control up to 20 switches. Designed with both benchtop and ATE environments in mind, this flexible, stand-alone driver provides an intuitive user interface, a variety of switching options, software programmability and remote control features for quick, easy design validation and automated testing.

  • BSIM6 Model Generation

    W8615EP - Keysight Technologies

    BSIM6 is semiconductor industry's newest standard model for bulk MOSFETs. Unlike its predecessors (BSIM3 & BSIM4), BSIM6 has been formulated by using a more physical surface-potential/charge-based approach, sharing commonalities with other two industry standard bulk models, PSP and HiSIM2. The main benefit of BSIM6, in comparison to BSIM4, is its ability to maintain symmetry of output characteristics around zero drain-to-source bias. This turns out to be a key requirement for certain applications (such as passive switches) where the drain-to-source bias crosses zero during circuit operation.

  • Low Passive Intermodulation (PIM) Coaxial Switches

    Keysight Technologies

    Low Passive Intermodulation (PIM) Coaxial Switches

  • 64-Channel 3-wire T/C Relay Multiplexer

    E1476A - Keysight Technologies

    The Keysight E1476A High-Density Reed Relay Multiplexer is a C-size, 1-slot, register-based VXI module. This low-offset, thermocouple compensated multiplexer is dynamically configurable providing 64 channels of two-, three- or four-wire (32 channels) of switching. This multiplexer module consists of a component card with switches and a QUIC spring clamp terminal block that plugs onto the component card. The E1476A is ideal for applications needing a relay multiplexer that is dynamically configurable, and makes maximum high-quality, high-point count measurements.

  • General Purpose Modules for 34980A

    Keysight Technologies

    The 34980A General Purpose switches can be used to route signals or to control other devices in an application. These switches are ideal for device actuation, switching loads or power supplies. Both switches offer high power channels up to 150W. The general purpose modules also include a relay switch counter to help predict when relays need to be replaced.

  • PIN Solid State Switch, 100 MHz to 8 GHz, SP4T

    P9404A - Keysight Technologies

    The Keysight P9404A PIN solid state switch maximizes your operating frequency range from 100 MHz to 8 GHz. Providing superior performance in terms of isolation, insertion loss and return loss, the P9404A is particularly suitable for high-speed RF and microwave switching applications such as switch matrixes in instrumentation, communications and radar. These switches provide ultra-fast switching speed to increase throughput in manufacturing.

  • Thermal Cycling Unit

    N7783B - Keysight Technologies

    Keysight's Thermal Cycling Unit N7783B is fully controlled by the Keysight N7782B PER-Analyzer and allows accurate and repeatable cycling of the temperature of the fiber under test. The PER measurement system consisting of the Keysight N7782B and the Keysight N7783B shows excellent accuracy and repeatability. Ease of use and automation interfaces, such as analog output ports for active alignment, make it particularly useful for production environments.

  • Thin Film Coating

    Keysight Technologies

    Keysight is ready to meet all of your requirements for thin film optical coatings. Our modern coating chambers provide ion-assisted electron beam evaporation of metal and metal oxide materials to meet your most exacting requirements for index matching, anti-reflection, high reflection and polarizing or non-polarizing beam splitter coatings. Our experienced coating engineers can custom-design a coating to meet your precise specifications.

  • Three Axis Interferometer

    10736A - Keysight Technologies

    The Keysight 10736A Three Axis Interferometer is used in multiple axis applications where linear and angular control of the stage is required. It combines in a single package the functionality of an optical bench with multiple beam benders, beam splitters, and three interferometers. The interferometers split an incoming laser beam into three beams to measure linear distance, pitch and yaw, or linear distance, roll and yaw. Three linear measurements provide the basis for calculating two angular measurements. The inherent beam parallelism ensures that there is essentially no cosine error between the three measurements and also ensures angle accuracy for pitch and yaw measurements. Other characteristics include:

  • Three Axis Interferometer

    10735A - Keysight Technologies

    The Keysight 10735A Three Axis Interferometer is used in multiple axis applications where linear and angular control of the stage is required. It combines in a single package the functionality of an optical bench with multiple beam benders, beam splitters, and three interferometers. The interferometers split an incoming laser beam into three beams to measure linear distance, pitch and yaw, or linear distance, roll and yaw. Three linear measurements provide the basis for calculating two angular measurements. The inherent beam parallelism ensures that there is essentially no cosine error between the three measurements and also ensures angle accuracy for pitch and yaw measurements. Other characteristics include:

  • Analog Demodulation Measurement Application for EXM

    V9063B - Keysight Technologies

    The analog demodulation measurement application is for the EXM wireless test set and helps you easily achieve your manufacturing test goals for today's multi-format devices. Its easy-to-use, one-button measurements analyze analog modulated signals such as AM and PM. The application provides demodulated waveform, AF spectrum, RF spectrum, and demodulation metrics with unprecedented measurement speed. It also allows you to listen to the demodulated signal through a speaker for additional insight on the signal. Should issues arise, multiple color-coded result views help you quickly identify them for quick resolution. Using the analog demodulation measurement application and EXM wireless test set makes it easy to rapidly ramp up and optimize full-volume manufacturing. It's the solution that lets you solve today and evolve tomorrow.

  • cdma2000/IS-95/AMPS Mobile Test Application

    E1962B - Keysight Technologies

    E1962B cdma2000 mobile test application, which runs on the industry-standard 8960 Series 10 (E5515C/E) wireless communications test set, delivers comprehensive call processing and RF parametric test capability to verify the performance of your cdma2000/IS-95/AMPS tri-mode wireless devices.

  • 2 GHz Dual 1:4 RF Mux, 75 Ohm Module for 34970A/34972A

    34906A - Keysight Technologies

    The Keysight 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies--create a stubless 16:1 multiplexer in a single frame.

  • Active Differential Probe, 100 kHz to 7 GHz

    U1818A - Keysight Technologies

    The Keysight U1818A 100 kHz to 7 GHz active differential probe makes it easy to perform high frequency in-circuit measurements using network, spectrum and signal source analyzers. With flat frequency response, low noise floor, and direct power from instrument connection, the U1818A allows measurements to be made while taking full advantage of Keysight's RF analyzers dynamic range.