Keysight Technologies

Choosing the right electronic measurement equipment is an important decision which requires consideration about features, specifications, performance, and total cost of ownership. The Keysight Edge provides the insight to make the best investment decision for your application, operation, and business. Take a few moments to understand why looking beyond product price is a critical step in choosing your test & measurement solution.

  • 1 800 829-4444
  • 1 800 829-4433
  • usa_orders@keysight.com
  • 1400 Fountaingrove Parkway
    Santa Rosa, CA 95403-1738
    United States

Filter Results By:

Products

Applications

Showing recent results 1846 - 1860 of 2133 products found.

  • DDR Bus Simulator Distributed Computing 8-Pack

    W2317EP - Keysight Technologies

    The Advanced Design System (ADS) Double Data Rate (DDR) Bus Simulator Distributed Computing 8-pack accelerates signal integrity batch-mode parameter sweeps on workstations connected to a distributed computing cluster. This combination enables signal integrity designers to run these sweeps six up to eight times faster than on a single compute node of equal performance. The licenses can be "stacked" in packs of eight, yielding even greater speed up. This product (along with the required product W2312 Transient Convolution Distributed Computing 8-pack), speeds up parameter sweeps for three combinations: 1) Batch Simulation Controller with Transient Simulator and 2) Batch Simulation Controller with DDR Bus Simulator 3) Batch Simulation Controller with Channel Simulator.

  • Low PIM Coaxial Switch, DC to 4 GHz, SP4T

    87104P - Keysight Technologies

    Low passive intermodulation (PIM) is crucial for applications where two or more transmitted signals share a common antenna or whenever the transmitter signal is too high or the receiver is sensitive to high intermodulation. The Keysight 87104P is a low PIM SP4T coaxial switch, operating from DC to 4 GHz, which can help to keep the system PIM level low. A guaranteed 0.03 dB insertion loss repeatability and 3 million cycles of operating life ensures signal integrity, improves testing efficiency, and ultimately maximizes test throughput.

  • Low PIM Coaxial Switch, DC to 20 GHz, SP6T

    87106Q - Keysight Technologies

    Low passive intermodulation (PIM) is crucial for applications where two or more transmitted signals share a common antenna or whenever the transmitter signal is too high or the receiver is sensitive to high intermodulation. The Keysight 87106Q is a low PIM SP6T coaxial switch, operating from DC to 20 GHz, which can help to keep the system PIM level low. A guaranteed 0.03 dB insertion loss repeatability and 3 million cycles of operating life ensures signal integrity, improves testing efficiency, and ultimately maximizes test throughput.

  • Digital Interconnect Test System, Reference Solution

    Keysight Technologies

    When you need to measure advanced S-parameters with a fast, low-cost and easy-to-use test solution, the Digital Interconnect Test System gives you a significant edge. It provides a full 32-port vector network analyzer (VNA) configured within a single PXI chassis – ideal for high-speed cable testing. And lets you test any linear passive interconnect faster and easier, including backplanes, connectors and PCBs. Sharpen your edge with Keysight’s Digital Interconnect Test System that enables signal integrity characterization of multiport interconnect products.

  • E-Band Signal Analysis Reference Solution

    Keysight Technologies

    The E-band signal analysis reference solution provides an effective measurement solution for today’s wideband signals as well as emerging communications standards. With the M1971E waveguide harmonic mixer, which provides a 55 to 90 GHz input; Keysight oscilloscopes, which provide excellent signal integrity; and the powerful 89600 VSA software, you have a high-quality wideband measurement solution. A simple user interface also provides integrated mixer setup, correction and LO optimization, allowing for accurate measurements.

  • Infiniium V-Series Oscilloscope

    DSOV334A - Keysight Technologies

    33 GHz analog bandwidth4 analog channelsCapture a longer signal trace with up to 80 GSa/s sample rate and 2 Gpts of acquisition memoryGet the best signal integrity with low noise floor (2.09 mVrms at 50 mV/div) and lowest jitter measurement floor (100 fs)See better measurement accuracy with ENOB values in excess of 5.5 and a SFDR exceeding 50 dBCImprove your testing with the broadest range of jitter, trigger, analysis and protocol tools (featuring PrecisionProbe)

  • High-Definition Oscilloscope

    MSOS204A - Keysight Technologies

    2 GHz bandwidth (upgradable)4 analog plus 16 digital channelsCapture a longer signal trace with 20 GSa/s max sample rate and 100 Mpts/channel of standard memoryGet superior signal integrity with system ENOB of 7.5 bits and 10-bit analog-to-digital converter (ADC)Gain increased usability with the multi-touch supported 15" capacitive touch screen and solid state drive for fast boot and reliabilityImprove your testing with a wide range of protocol, compliance, and analysis software

  • Oscilloscopes

    Keysight Technologies

    Get your products to market faster with award-winning oscilloscopes that offer the fastest update rates, the deepest memory, the industry’s only capacitive touch screen, and the most oscilloscope software optionsProduce the highest-performing products with measurements you can trust thanks to oscilloscopes with industry-leading signal integrity and the largest selection of oscilloscope probesAchieve the lowest cost of ownership with multiple instruments in one mainframe and easy upgrades

  • Mixed Signal Oscilloscope

    MSOV254A - Keysight Technologies

    25 GHz analog bandwidth (upgradable)4 analog plus 16 digital channelsCapture a longer signal trace with up to 80 GSa/s sample rate and 2 Gpts of acquisition memoryGet the best signal integrity with the low noise floor (1.73 mVrms at 50 mV/div) and lowest jitter measurement floor (100 fs)See better measurement accuracy with ENOB values in excess of 5.5 and a SFDR exceeding 50 dBCAccess the broadest range of jitter, trigger, analysis and protocol tools (featuring PrecisionProbe)

  • Mixed Signal Oscilloscope

    MSOV134A - Keysight Technologies

    13 GHz analog bandwidth (upgradable)4 analog plus 16 digital channelsCapture a longer signal trace with up to 80 GSa/s sample rate and 2 Gpts of acquisition memoryGet the best signal integrity with the low noise floor (1.09 mVrms at 50 mV/div) and lowest jitter measurement floor (100 fs)See better measurement accuracy with ENOB values in excess of 5.5 and a SFDR exceeding 50 dBCAccess the broadest range of jitter, trigger, analysis and protocol tools (featuring PrecisionProbe)

  • Low PIM Coaxial Switch, DC to 26.5 GHz, Transfer

    87222R - Keysight Technologies

    Low passive intermodulation (PIM) is crucial for applications where two or more transmitted signals share a common antenna or whenever the transmitter signal is too high or the receiver is sensitive to high intermodulation. The Keysight 87222R is a low PIM transfer coaxial switch, operating from DC to 26.5 GHz, which can help to keep the system PIM level low. A guaranteed 0.03 dB insertion loss repeatability and 3 million cycles of operating life ensures signal integrity, improves testing efficiency, and ultimately maximizes test throughput.

  • Infiniium V-Series Oscilloscope

    DSAV254A - Keysight Technologies

    25 GHz analog bandwidth (upgradable)4 analog channelsCapture a longer signal trace with up to 80 GSa/s sample rate and 2 Gpts of acquisition memoryGet the best signal integrity with the low noise floor (1.73 mVrms at 50 mV/div) and lowest jitter measurement floor (100 fs)See better measurement accuracy with ENOB values in excess of 5.5 and a SFDR exceeding 50 dBCImprove your testing with the broadest range of jitter, trigger, analysis and protocol tools (featuring PrecisionProbe)

  • High-Definition Oscilloscope

    MSOS104A - Keysight Technologies

    1 GHz bandwidth (upgradable)4 analog plus 16 digital channelsCapture a longer signal trace with 20 GSa/s max sample rate and 100 Mpts/channel of standard memoryGet superior signal integrity with system ENOB of 7.8 bits and 10-bit analog-to-digital converter (ADC)Gain increased usability with the multi-touch supported 15 inch capacitive touch screen and solid state drive for fast boot and reliabilityImprove your testing with a wide range of protocol, compliance, and analysis software

  • High-Definition Oscilloscope

    MSOS054A - Keysight Technologies

    500 MHz bandwidth (upgradable)4 analog plus 16 digital channelsCapture a longer signal trace with 20 GSa/s max sample rate and 100 Mpts/channel of standard memoryGet superior signal integrity with system ENOB of 8.1 bits and 10-bit analog-to-digital converter (ADC)Gain increased usability with the multi-touch supported 15 " capacitive touch screen and solid state drive for fast boot and reliabilityImprove your testing with a wide range of protocol, compliance, and analysis software

  • PNA-L Microwave Network Analyzer

    N5239B - Keysight Technologies

    Perform basic analysis of passive components and simple active devicesMeasure S-parameters with good accuracy up to8.5 GHz in cost-sensitive applicationsGet the world's best price-to-performance ratio for microwave manufacturingConfigure an economical solution for signal-integrity measurements and materials characterizationAccelerate insight into component behavior using a multi-touch display and intuitive user interface Every spec verified, adjustments included Lock in support & peak performance from the start