Keysight Technologies

Choosing the right electronic measurement equipment is an important decision which requires consideration about features, specifications, performance, and total cost of ownership. The Keysight Edge provides the insight to make the best investment decision for your application, operation, and business. Take a few moments to understand why looking beyond product price is a critical step in choosing your test & measurement solution.

  • 1 800 829-4444
  • 1 800 829-4433
  • usa_orders@keysight.com
  • 1400 Fountaingrove Parkway
    Santa Rosa, CA 95403-1738
    United States

Filter Results By:

Products

Applications

Showing recent results 1981 - 1995 of 2133 products found.

  • RF Bridge, 50 Ohm, 300 kHz to 6 GHz

    86205A - Keysight Technologies

    The Keysight 86205A high directivity 50 ohm RF bridge offers unparalleled performance in a variety of general-purpose applications. It is ideal for accurate reflection measurements and signal leveling applications.

  • RF Design Verification and Conformance Test Systems

    GS-8800 Series - Keysight Technologies

    The Keysight GS-8800 is a series of scalable test systems built on the 8960 (E5515 series) wireless communications test set, covering cellular device design verification, conformance, and manufacturing test needs.

  • Genesys Core, Synthesis, Circuit, System Bundle

    W1326BP - Keysight Technologies

    Interactive system frequency planning and complete RF circuit synthesis capabilities cut tedious routine design tasks from hours to minutes; while innovative root cause analysis in the Spectrsys system simulator identifies the origins of problematic spurious signals before critical commitments are made to architectures, frequencies, and component partitioning to prevent costly hardware integration delays downstream.

  • Solid State PIN Diode Transfer Switch, 100 MHz to 8 GHz

    P9400A - Keysight Technologies

    The Keysight P9400A solid state PIN diode transfer switch offers outstanding performance in terms of port-to-port isolation, switching speed and low insertion loss over a broad operating frequency range of 100 MHz to 8 GHz. The P9400A is particularly well-suited for ultra-fast RF and microwave switching applications in instrumentation, communications, radar, switch matrices and various other test systems where high isolation, speed and lifetime of a switch are critical.

  • FieldFox and HSA Handheld Spectrum Analyzers

    Keysight Technologies

    Carry Keysight-quality microwave measurements wherever you need to goBoost your readiness with an RF unit: every operating mode is flexible enough to meet the needs of novices & experts alikeEndure the harshest working conditions with analyzers designed for durability – completely sealed, rugged & weather-resistantSave time and ensure consistent results by automating routine tasks for basic spectrum analysis

  • Basic Spectrum Analyzers

    BSA - Keysight Technologies

    ncrease productivity on a budget with reliable performance up to 7 GHzGet higher test efficiency with optimized measurement speed and value-added featuresReduce learning curve and enhance testing productivity with improved usability featuresMeet a wider range of demanding RF test needs with multiple functionalities covering spectrum analysis, signal monitoring and transmission/reflection measurements

  • SystemVue Array Architect

    W1467BP - Keysight Technologies

    The W1467 SystemVue Array Architect bundle provides system architects in 5G, Radar/EW, and Satellite communications with the essential tools to evaluate phased array and beamforming subsystems, including RF, Digital, and Hybrid beamforming architectures. Now you can consider RF nonlinear & noise effects, Gain/Phase quantization, and Monte Carlo variations effects on total beam quality, sidelobe levels, and effective radiated power. Also supports dynamic system-level scenarios with algorithms for adaptive beamforming.

  • Bias Network, 45 MHz to 50 GHz

    11612B - Keysight Technologies

    The Keysight 11612B broadband high power bias network can be used in a wide variety of biasing applications for test and measurement requirements in laboratory and production environments. Bias networks provide the means of supplying dc bias to the center conductor of the coax connector for your device while blocking the dc to the RF port.

  • PXIe Measurement Accelerator

    M9451A - Keysight Technologies

    The M9451A PXIe Measurement Accelerator combined with Option DPD Digital Pre-Distortion & Envelope Tracking Gateware shows what is possible when you combine state of the art FPGA's with Keysight's trusted measurement expertise and PXIe's high speed data handling. As part of Keysight's RF PA/FEM Characterization & Test, Reference Solution, this combination provides unprecedented performance for demanding envelope tracking and digital pre-distortion measurements required for testing modern power amplifiers (PAs) and front-end modules (FEMs). Hardware acceleration provides better than 20x speed improvement over Keysight's previous host-based Reference Solution, with closed/open loop digital pre-distortion (DPD) and envelope tracking (ET) measurements taking just tens of milliseconds and overall measurement times less than 70 ms.

  • PXI Hybrid Dual Transfer Switch, DC to 26.5 GHz

    M9156C - Keysight Technologies

    M9156C operates from DC to 26.5 GHz, providing a low-cost operation switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromise in the RF performance. It is being used in applications such as ATE, RF communications measurement and RF parametric measurements where a rugged switching module is needed for signal routing. Keysight M9156C transfer switches can be used in many different applications to increase system flexibility and simplify system design. For example, switch between two inputs and two outputs, or bypass an active device.

  • RF Limiter, 10 Hz to 1800 MHz

    11867A - Keysight Technologies

    11867A RF limiter can be used to protect the input circuits of spectrum analyzers, counters, amplifiers, and other instruments from high power levels with minimal effect on measurement performance. This limiter (10 Hzto 1800 MHz) reflects signals up to 10 watts average power and 100 watts peak power. Insertion loss is less than 0.75 dB.

  • Peak Power Analyzer

    8990B - Keysight Technologies

    The 8990B peak power analyzer is a high performance RF peak power meter specializing in the measurement and analysis of RF pulses. The 8990B achieves 5 ns rise/fall time (with the N1923A/N1924A wideband power sensor), the fastest overall rise/fall time in the peak power measurement market, allowing R&D engineers and technicians to capture shorter pulse measurements with high accuracy during the module design, verification and troubleshooting process.

  • PXIe High-Speed Source/Measure Unit, 13 V, ± 1 A or 6 V, ± 3 A, 18 W

    M9111A - Keysight Technologies

    The M9111A is a 1-slot, 2-quadrant PXIe module that provides stable, glitch-free sourcing and sinking, and high accuracy measurements. It offers high-throughput and measurement quality for design validation and production test of RF power amplifiers. With industry-leading output stability under extreme, dynamic load conditions and unmatched transient performance to dramatically reduce voltage droop due to pulse loading, the M9111A SMU speeds test time. The high-speed M9111A can change its output voltage, stabilize that voltage, and accurately measure current from Amps down to micro-Amps all in less than 1 ms so that you can move on to the next test as quickly as possible.

  • EXG X-Series RF Analog Signal Generator, 9 kHz to 6 GHz

    N5171B - Keysight Technologies

    Achieve faster throughput and greater uptime with the cost-effective performance optimized for manufacturing testPerform basic parametric testing of components and functional verification of receivers with industry-leading output powerThoroughly verify receiver performance by simulating complex analog modulation scenarios with multi-function generator capabilityMinimize downtime and expenses with self-maintenance solutions and low-cost repairs

  • Thermistor Power Meter

    N432A - Keysight Technologies

    Keysight N432A is the replacement for Keysight's legacy 432A analog thermistor power meter. The single-channel, average RF power meter operates with the Keysight 8478B and 478A thermistor mounts. The N432A-and-thermistor-mount pair is ideal for applications that require high measurement accuracy, particularly in metrology and calibration laboratory environments. The enhanced thermistor power meter comes with a digital color LCD display, and user-friendly front panel interface. Its built-in calibration factor table provides a more convenient and accurate method of storing calibration factors as compared to the old knob-turning approach of the 432A. The N432A is LXI compliant, and programmable via GPIB, USB and LAN.