Keysight Technologies

Choosing the right electronic measurement equipment is an important decision which requires consideration about features, specifications, performance, and total cost of ownership. The Keysight Edge provides the insight to make the best investment decision for your application, operation, and business. Take a few moments to understand why looking beyond product price is a critical step in choosing your test & measurement solution.

  • 1 800 829-4444
  • 1 800 829-4433
  • 1400 Fountaingrove Parkway
    Santa Rosa, CA 95403-1738
    United States

Filter Results By:



Showing recent results 451 - 465 of 2126 products found.

  • Impedance Analyzer, 20 Hz to 10/20/30/50/120 MHz

    E4990A - Keysight Technologies

    The E4990A Impedance Analyzer has a frequency range of 20 Hz to 120 MHz. The E4990A provides an industry best 0.045% (typical) basic accuracy over a wide impedance range, with a 40 V built-in DC bias source. The equivalent circuit analysis function supports seven different multi-parameter models and helps you to simulate your own equivalent parameter values of components.

  • Impedance Analyzers

    Keysight Technologies

    The E4990A Impedance Analyzer with a frequency range of 20 Hz to 120 MHz provides an industry best 0.045% (typ.) basic accuracy over a wide impedance range, with a 40 V built-in DC bias source.

  • Integrated Coherent Receiver Test Solution

    M8290430A - Keysight Technologies

    Integrated Coherent Receiver (ICR) modules are key components in coherent transmission systems and are more challenging to test than direct-detection receiver optical sub-assemblies (ROSAs), as the ICRs have phase-sensitive signal detection and provide four electrical outputs and two optical inputs. The test instruments used in ROSA S21 testing cannot be used in a similar way for S-parameter testing of ICRs, making S-parameter testing very challenging.

  • Integrated One Channel Variable Optical Attenuator with two Optical Power Meter Channels

    N7751A - Keysight Technologies

    The Keysight N7751A combines an attenuator with 2 front-panel power meter channels, offering exceptional performance at a low price. The power meters permit measurements from any point in the measurements setup and assist in calibrating power offsets with respect to the attenuator output.

  • Integrated Optical Modulation Analyzer

    N4392A - Keysight Technologies

    The new Keysight N4392A is an ultra-compact, portable fully integrated optical modulation analyzer with a 15'' laptop-size screen. It is optimized for daily R&D work and designed for the most affordable performance verification in manufacturing and component test for 40/100G components, modules and systems. It is the first optical modulation analyzer that provides built-in performance verification and recalibration, extending the factory recalibration cycles significantly.

  • Integrated Two Channel Variable Optical Attenuator with two Optical Power Meter Channels

    N7752A - Keysight Technologies

    The Keysight N7752A combines an attenuator with 2 front-panel power meter channels, offering exceptional performance at a low price. The power meters permit measurements from any point in the measurements setup and assist in calibrating power offsets with respect to the attenuator output.

  • Interactive Functional Test (IFT) Software

    Keysight Technologies

    Keysight’s Interactive Functional Test (IFT) software, designed to fully utilize the industry-leading signaling and data capabilities of Keysight’s 8960 (E5515C/E) and E6621A PXT wireless communications test sets, provides a solution for real-world functional test of mobile devices. Bring real-world test into the design cycle earlier by automating and simplifying design, verification, stress test, and realistic "user-experience" scenarios.

  • Interactive Functional Test Software

    N5972A - Keysight Technologies

    The ever-increasing complexity of cellular devices is driving the need to stress test phones and modems using scenarios that anticipate realistic use cases. Performing this testing, and making any necessary alterations, during the design and verification stage prevents the cost of resolution from growing exponentially as the functionality-packed devices progresses further downstream. Running functional test scenarios early in development of user equipment (UE) reduces the number of cycles between design and compliance .Keysight offers a number of test solutions based on functional test demands. Our measurement knowledge and testing experience is built in to a range of test tools, so you can focus on UE verification testing rather than developing in-house test tools.The Keysight Technologies N5972A interactive functional test (IFT) software provides an automated and simplified interface for testing cellular UE for real-world network scenarios experienced by end users. Highly-configurable, this performance test software allows you to tailor test plans to verify functionality that is important to you and your customers and measure performance in a controlled laboratory environment. With IFT software you can perform multiple tests simultaneously. For example, characterize what happens when a user is performing an FTP download, receiving an SMS message, and moving away from the base station (cell power is decreasing). You can also measure battery performance whilst performing these tests or when simulating use cases for different customer profiles.

  • InterconnectPlus Boundary Scan

    IEEE 1149.1 - Keysight Technologies

    IEEE 1149.1 is a standard approved by the Institute of Electrical and Electronics Engineers (IEEE) in 1990 that allows testing of a device without the need to know the function of the core logic of the device. This is achieved in large part through the use of a chain of registers in series; each register associated with a signal pin of a device. This boundary register is located between the core logic of the device and the pin of the device leading to the outside of the device package. The behavior of these boundary registers are controlled by what is called the TAP controller. This architecture is implemented fully within the silicon of the device. (Fig 1)

  • Interconnect Toolbox Element

    W2307EP - Keysight Technologies

    TheInterconnect Toolbox utility enables you to optimize your PC board (PCB) stack up and transmission line geometry using metrics that matter, namely post-equalizer eye diagram parameters. Other tools will show you the impairments of the lines, such as loss, frequency roll off, and impedance variation, but in today's multi gigabit chip-to-chip links these metrics are inadequate. What really matters is the eye parameters after the line impairments have been mitigated by the signal processing in modern Serializer/Deserializer (SerDes), for example transmitter (Tx) pre-emphasis and reciever (Rx) equalization. In fact the whole point of the signal processing in the I/O of modern chips is to allow you to use lower cost materials and yet still open the eye.

  • Handheld Capacitance and LCR Meters

    U1700 Series - Keysight Technologies

    Need to perform indicative LCR checking on the go?The U1731C/32C/33C LCR meters allow you to measure frequencies as high as 100 kHz, a capability typically found only in benchtop meters.Gain better noise immunity and save money with Option-SMD. Each of the order comes with an Option-SMD that consists of a handy soft carrying case and SMD tweezer for better value of your money. The SMD tweezer is suitable for making measurements on SMD components and is used with the guard terminals on meter for better noise immunity.

  • Handheld Capacitance Meter

    U1701B - Keysight Technologies

    Capacitance meters do not always need to be on the bench. Neither do they always need to strain your budget. Keysight's new U1701A capacitance meter now puts the capacitance meter into the palm of your hand while doing random checks across the production floor or performing checks at your inspection or sorting stations. With wide measurement range, and features to ease your sorting tasks, the U1701A puts a new level of convenience into the world of capacitance meters.

  • Handheld Digital Multimeter, 4.5-digit

    U1252B - Keysight Technologies

    The Keysight U1252B 4.5-digit handheld digital multimeter (DMM) is feature-packed to simplify the troubleshooting of electronics and electrical circuits on the bench or in the field. Key capabilities include manual and automated data logging to both DMM and PC. For those long, continuous measurements, the DMM equips you with the easy-to-use GUI data-logging software to automate virtually unlimited data recordings to PC. The U1252B comes with an integrated 20 MHz frequency counter for high frequency measurements, and a built-in programmable square-wave generator with selectable frequency and duty cycle. With the versatile U1252B, you are well equipped to perform thorough troubleshooting of any faulty circuit.

  • Handheld Digital Multimeter, 4.5 digit, OLED display, -40C to 55C operating temperature

    U1273AX - Keysight Technologies

    Coupled with the OLED display capability, experience crystal-clear readings at 160 degrees viewing angle when performing measurement tasks in a poorly lit environment. With all these enhanced features, the U1273AX is ready for the extremeswhenever you are.

  • Handheld Digital Multimeter, 4.5 digit, up to 800 hours battery life

    U1282A - Keysight Technologies

    60,000 counts resolution on dual display0.025% basic DC voltage accuracyLonger battery life up to 800 hoursCertified to IP 67 for dust and water protectionTested to withstand a 3-meter (10-ft) dropProgrammable via USB (Download Programming Guide here)CAT III 1000 V/ CAT IV 600 V overvoltage protectionVsense for non-contact voltage detectionSquare wave output for generating pulse width modulation (PWM) signalFrequency counterLow pass filter