Cytec Corp.

Cytec Corporation is a privately held business incorporated since 1980 and located in Upstate New York. We offer more than 25 different standard Switching Systems and can custom design Switching Systems to meet our clients' requirements.

  • (800) 346-3117
    585-381-4740
  • 585-381-0475
  • 2555 Baird Rd.
    Penfield, NY 14526

Filter Results By:

Products

Applications

Showing recent results 61 - 75 of 78 products found.

  • PC/AT/XT Compatible Modules

    PC Series - Cytec Corp.

    The PC Series Modules are broken into two distinct categories, PC-B and PCI. The PC-B modules plug into PC/AT/XT compatible ISA bus slots while the PCI modules plug into PCI slots. Both are available as either switch modules or driver modules. The modules can be controlled either by direct hardware port access or by installable device drivers. PCI modules come with plug and play device drivers. Software support is available for the most common program languages. The modules also have a special status feedback feature which enables the computer to confirm that the correct selections have been made by checking the relay drive. This can be used to self test the modules or as a diagnostic tool.

  • High Density Switches, Switching Systems & Multiplexers

    JX Series - Cytec Corp.

    This compact and economically priced series can be used as either 1xN multiplexers, 2xN matrices, or individual switches. As multiplexers, they can be used as a large number of individual muxes or jumpered together to form as large a mux as you need to switch a large number of inputs or outputs to one common port. As a 2xN matrix they allow you to switch any number of signals between two ports of a DVM, DMM, LCR, or other type of meter or supply. Individual relay modules are available for other configurations requiring discrete SPST or SPDT relays with standard, mercury wetted or power relays.

  • High Performance Switching Matrix Systems

    VX Series - Cytec Corp.

    The VX Series of low-cost, versitile switching systems use a modular concept of switch modules, display modules and control modules which can be assembled into VX/256 Mainframes as matrices, multiplexers, or individual relays.

  • CXM Custom Chassis

    Cytec Corp.

    Cytec can manufacture custom microwave systems to your specifications. Need to build a switch with 6 different styles of relays? Want to combine relays, amps, splitters and couplers? Need to combine parts from 8 different vendors to meet the specs you want?

  • CXR Low Leakage Switch Modules

    Cytec Corp.

    These switch modules use reed relays with extremely low leakage to ground and across contacts for applications where you need to measure extremely high resistance, or extremely low leakage currents. Can be built with driven guards and triax connectors for fast low leakage measurements and ultra low noise levels.

  • Very High Density Switching Systems

    HDX Series/ 4600 Series - Cytec Corp.

    Cytec's new 4600 Series are economical, high density, passive, bidirectional switch matrices. Each chassis holds up to 2048 two pole Type A relays. A modular design allows for great flexibility in creating different switching topologies.

  • Video and RF Switches and Matrix Switching Systems

    VDX Series - Cytec Corp.

    Cytec's VDX Series of video and RF switching systems are based on a solid state switch fabric and are available in non-blocking, full fan-out configurations of 16x16 to 32x32, with a bandpass of 400 MHz for 16x16 and 200MHz for 32x32. Input and output buffers can be added to the basic switch fabric allowing a broad range of both 50 and 75 ohm impedance signals to be switched.

  • Tree Switch Modules

    CXG DC to 2 GHz - Cytec Corp.

    These switch modules use RF relays in a stubless tree switch configuration to provide 50 or 75 ohm impedance modules. 50 ohm modules are available with SMA or BNC connectors. 75 ohm modules are available with BNC or F connectors ( some modules).

  • Microwave Modules

    CXM/4x2 - Cytec Corp.

    CXM/4x2-T-L-2.92 Microwave Modules are used in Modular CXM chassis to build matrix configurations with extremely good specifications. The system uses latching, terminated and hi isolation relays rated to 5 million cycles for ultimate performance and reliability.

  • Switch Modules

    JX16/AB-1 - Cytec Corp.

    This module has 16 single pole relays arranged as an 8x2 matrix as shown in the figure to the left. The matrix may be operated and wired individually for up to 16 8x2's per chassis, or jumpered to the backplane to form up to a 128x2 matrix. It is available with Type S or M reed relays for high speed, long life application. These modules are usually used for 2 wire testing where high and low meter leads must be switched between any two points. Often used for 2 wire LCR meter measurements, cable testing, or open / short testing in a variety of applications.

  • CXR Reed Relay Switch Modules

    Cytec Corp.

    These switch modules use high reliability reed relays for applications below 150 MHz. Fast, inexpensive reed relays are perfect for coaxial switching at lower frequencies. Switch times of 1 ms and life expectancy of 100 million operations. BNC connectors.

  • Switch Modules

    CXS 75 ohm CATV - Cytec Corp.

    These switch modules use high reliability solid state switches for 75 ohm applications between 1 and 1000 MHz ( typical cable TV). Fast, inexpensive solid state relays are perfect for coaxial switching at CATV frequencies. Switch times of 1 ms and life expectancy of 100 billion operations. Terminated to 75 ohms in both directions for use with splitters in either direction.

  • Switch Modules

    JX16/AB-2 - Cytec Corp.

    This module has 16 two pole relays arranged as an 8x2 matrix as shown in the figure to the left. The matrix may be operated and wired individually for up to 16 8x2's per chassis, or jumpered to the backplane to form up to a 128x2 two pole matrix. It is available with Type S, M or LT reed relays for high speed, long life application. These modules are usually used for 2 wire matrix applications where any number of 2 wire signals must be switched between either of 2 pieces of equipment.

  • Switch Modules

    JX32/AB-1 - Cytec Corp.

    This module has 32 single pole relays arranged as a 16x2 matrix as shown in the figure to the left. The matrix may be operated and wired individually for up to 16 16x2's per chassis, or jumpered to the backplane to form up to a 256x2 matrix. It is available with Type S or M reed relays for high speed, long life application. These modules are usually used for 2 wire testing where high and low meter leads must be switched between any two points. Often used for 2 wire LCR meter measurements, cable testing, or open / short testing in a variety of applications.

  • High Density Switch Matrix

    PX Series - Cytec Corp.

    The PX Series of switching modules are compact and economically priced units using high reliability reed relay modules assembled into pre-wired mainframes or expansion chassis to assemble a 32x16 matrix, two 32x8 matrices or a 64x8 matrix with either single or double pole signal switching Computer control can be from IEEE488, RS232, or 10/100Base-T ethernet.