Showing results: 1 - 15 of 34 items found.
-
68-86 -
Testing Machines, Inc.
The 68-86 Digital Pocket Microscope delivers crisp, clear high-resolution colour images with a resolution up to 1280x1024 pixels. The integrated LED illumination can be switched on/off, which allows optional illumination for special investigations. The button on the DPM is pressed to capture an image.
-
46-06 -
Testing Machines, Inc.
The Ray-Ran Environmental Stress Cracking Apparatus determines the susceptibility of ethylene plastics to stress-cracking when exposed to different environments such as soaps, wetting agents, oils and detergents. When the material is under certain conditions of stress, these reagents can accelerate the cracking process which is one of the most common causes of unexpected brittle failure of polymers known. Designed in accordance with the ASTM D1693 international test standard, the apparatus is extremely cost effective and very simple to use.
-
31-23 -
Testing Machines, Inc.
With this machine, a pliable specimen is placed under a constant tension load. The specimen is then folded to an angle of 135° in either direction, at the rate of 175 double folds per minute until the specimen is severed at the crease. A variable folding rate option allows the operator to vary the folding rate between 20 and 175 double folds per minute.
-
80-28 -
Testing Machines, Inc.
The PICMA Tack Tester measures tacking strength between unvulcanized rubbers and between unvulcanized rubber and other materials. Tacking strength of other adhesive materials can also be measured. P-1 model with 0.1~15N (1div=0.1N) measuring load range.
-
80-29 -
Testing Machines, Inc.
The PICMA Tack Tester measures tacking strength between unvulcanized rubbers and between unvulcanized rubber and other materials. Tacking strength of other adhesive materials can also be measured. P-2 model with 0.5~25N (1div=0.5N) measuring load range.
-
68-76 -
Testing Machines, Inc.
The Model 68-76 PocketGoniometer PGX+ is an electronic, video-based, contact-angle goniometer designed for quality control applications. To perform a measurement, simply place the portable instrument directly on the specimen and press “start.” No sample cutting or preparation is required, saving set up time and eliminating the need for sample manipulation.
-
84-08-15 -
Testing Machines, Inc.
The Probe Tack Adhesion Fixture is a tool used for the measurement of the pressure sensitive tack of adhesives. Tack is typically measured as the force required to separate an adhesive and the adherend shortly after having been brought into contact under a defined load of known duration at a specified temperature. Tack is measured as the maximum force required to break the adhesive bond.
-
84-56 -
Testing Machines, Inc.
The model 84-56 Horizontal Tensile Tester combines a modern contemporary look with a robust mechanical design and new improved electronics including a color touch screen and user-friendly interface. The menus are interactive and the large buttons are designed for easy access.
-
17-40 -
Testing Machines, Inc.
The Box Compression Tester is a four column, heavy duty tester designed to determine the compressive forces which a transport case is subjected-either in transit or stacked in a warehouse. Boxes can be tested to complete collapse or held automatically at predetermined load for a given period to evaluate stacking loads.
-
33-23 -
Testing Machines, Inc.
Canadian Standard Freeness Tester determines the rate of drainage of a dilute pulp suspension and express it in terms of freeness. The rate of drainage is related to the work done on the fiber during beating or refining. Two models are offered: stand model (stainless steel) and wall model (brass).
-
33-24 -
Testing Machines, Inc.
Canadian Standard Freeness Tester determines the rate of drainage of a dilute pulp suspension and express it in terms of freeness. The rate of drainage is related to the work done on the fiber during beating or refining. Two models are offered: stand model (stainless steel) and wall model(brass).
-
Testing Machines, Inc.
TMI has a wealth of knowledge in instrumentation covering a variety of industries. Our Global PM&C (Preventative Maintenance and Calibration) Group is capable of providing calibration services for most laboratory instruments including Tensile Strength, Thickness, Elmendorf Tear, COF (Coefficient of Friction), Smoothness, Porosity, Parker Print Surf, Contact Angle, Compression, Burst Strength, Melt Flow, Impact Strength (IZOD/Charpy).
-
80-20 -
Testing Machines, Inc.
The Internal Bond Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously. The Prep Station requires a filtered air supply meeting IG4 Industrial Grade Air: ISO Class 1-4-1.
-
17-11 -
Testing Machines, Inc.
Accessories for the Compression Tester 17-76: Use the ECT fixture to turn the 17-76 or other units into a full edge crush tester, then switch it out with the RCT to turn it into a ring crush tester. See other fixture options below for flat crush testing, pin adhesion, etc. Then contact TMI for a price on any unit or talk to someone about your application.
-
17-76 -
Testing Machines, Inc.
Designed in close cooperation with industry, the 17-76 Compression Tester is rugged enough for any production testing environment. Utilizing intuitive hardware features and menu-driven software, the 17-76 is designed to provide highly accurate measurement of compressive strength for a variety of materials.