Showing results: 31 - 45 of 520 items found.
-
Extech EC-84-P -
Extech Instruments Corporation
Extech EC-84-P are two bottles of Conductivity Standard, 1 pint each of pre-made solution. EC-84-P 84 µS is for use with Extech conductivity meters like the EC400 ExStik Conductivity/TDS/Salinity Meter or DO610 ExStik II DO/pH/Conductivity Kit.
-
Extech EC605 -
Extech Instruments Corporation
The Extech EC605 is a replacement or spare Conductivity Cell for use with the EC600 portable water conductivity meter and DO700 portable dissolved oxygen meter. Product comes with a six-month warranty.
-
Extech DO703 -
Extech Instruments Corporation
The Extech DO703 is a set of replacement or spare Membrane Caps. It is for use with the DO700 Portable Dissolved Oxygen Meter. Comes in a set of three caps. This product comes with a six month warranty.
-
Extech CO250 -
Extech Instruments Corporation
This Portable Indoor Air Quality CO2 Meter measures Carbon Dioxide (C02), Temperature, Humidity, Dew Point, and Wet Bulb. Checks for Carbon Dioxide (CO2) concentrations and calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit). User programmable audible alarm. Data acquisition software and cable included to record and document CO2, Humidity and Temperature data. Complete with software and cable, 4 AA batteries, and carrying case.
-
Extech EX006 -
Extech Instruments Corporation
The Extech EX006 is a Weighted Base and Solution Cups Kit. For use with water quality meters such as the PH110 ExStik Refillable pH Meter or EC500 Waterproof ExStik II pH/Conductivity Meter. The iron cast weighted base can hold the meter in any of the 5 plastic solution cups to obtain a more stable reading, allowing even for hands-free measurements.
-
Extech EX010 -
Extech Instruments Corporation
The Extech EX010 is an ExStik 3 foot Extension Cable with a Probe Guard and Weight. This product is for use with Extech meters like the DO600 Waterproof ExStik II Dissolved Oxygen Meter. The EX010 comes with a 6 month warranty.
-
Extech EX050 -
Extech Instruments Corporation
The Extech EX050 is an ExStik® 16 ft. Extension Cable with Probe Guard/Weight. For use with the Extech DO600 Waterproof ExStik II Dissolved Oxygen Meter.
-
Extech PT150-SD -
Extech Instruments Corporation
The Extech PT150-SD captures pressure measurements on hydraulic, pneumatic, air compressor, and process gas systems, as well as other industrial components. The PT150-SD features linearized current output (4 to 20 mA DC), a 6.4 mm (0.25 in) NPT port connector with a PS 6.4 mm adapter, and 1% full scale accuracy. The unit is made of corrosion-resistant stainless steel and requires a 9-30 VDC power source.
-
Extech PT300-SD -
Extech Instruments Corporation
The Extech PT300-SD captures pressure measurements on hydraulic, pneumatic, air compressor, and process gas systems, as well as other industrial components. The PT300-SD features linearized current output (4 to 20 mA DC), a 6.4 mm (0.25 in) NPT port connector with PS 6.4 mm adapter, and 1% full scale accuracy. The unit is made of corrosion-resistant stainless steel and requires a 9-30 VDC power source.
-
Extech PT30-SD -
Extech Instruments Corporation
The Extech PT30-SD captures pressure measurements on hydraulic, pneumatic, air compressor, and process gas systems, as well as other industrial components. The PT30-SD features linearized current output (4 to 20 mA DC), a 6.4 mm (0.25 in) NPT port connector with a PS 6.4 mm adapter, and 1% full scale accuracy. The unit is made of corrosion-resistant stainless steel and requires a 9-30 VDC power source.
-
Extech PT150 -
Extech Instruments Corporation
The Extech PT150 is a Pressure Transducer for 150 psi measurements with the SDL700 Pressure Meter/Datalogger and the 407495 Heavy Duty Pressure Meter with Interchangeable Transducers. For air or non-corrosive/non-ionized gas. 6.4 mm (1/4”) PS, 19 teeth per inch with a 1.2 m (3.9 ft) cable.
-
Extech PT30 -
Extech Instruments Corporation
The Extech PT30 is a Pressure Transducer for 30 psi measurements with the SDL700 Pressure Meter/Datalogger and the 407495 Heavy Duty Pressure Meter with Interchangeable Transducers. For air or non-corrosive/non-ionized gas. 6.4 mm (1/4”) PS, 19 teeth per inch with 1.2 m (3.9 ft) cable.
-
Extech HDV700-Series -
Extech Instruments Corporation
The Extech HDV700 is a versatile and lightweight professional videoscope that is designed for inspections in locations that are difficult or unsafe to access. With one or more of the eight waterproof (IP67) camera probes*, you can use the HDV700 for condition monitoring in manufacturing, HVAC/R, plumbing, building, and automotive applications. A range of small diameter and articulating camera probes are available to give you clear visibility of components from the 5-inch color touchscreen display. Easily maneuver the narrow probes into small openings without disassembling equipment. The HDV700 also features multiple data recording options so you can easily create reports at the job site by transferring images and videos to your laptop.
-
Extech HDV700 -
Extech Instruments Corporation
Videoscope display for Extech HDV700-Series; probes sold separately.Compatible with various camera probes:HD 5.5 mm × 1 m Camera Probe 5.5 mm × 3 m Camera ProbeDual HD 4.9 mm × 1 m Camera ProbeHD 2-Way Articulating 3.9 mm × 1 m Camera Probe2-Way Articulating 4.5 mm × 1.5 m Camera Probe4-Way Articulating 6 mm × 1 m Camera Probe4-Way Articulating 6 mm × 3 m Camera Probe28 mm Camera Probe with 30 m Plumbing Spool
-