Pickering Interfaces Ltd.

Pickering Interfaces, a global company, designs and manufactures high-quality modular signal switching and simulation for use in electronic test and verification. We offer the largest range of switching and simulation products in the industry for PXI, LXI and PCI applications, with over 1,000 in PXI alone. Our products are specified in test systems installed throughout the world and have a reputation for providing excellent reliability and value.

Our commitment to delivering you high-quality products does not just extend to our switching and simulation products. We also offer a full range of supporting cable and connector solutions, diagnostic test tools and software, including our signal routing software, Switch Path Manager and software drivers.

Our products have a history of longevity, typically 15–20 years, which is critical to many of our customers. All products manufactured by us come with a standard 3-year warranty and include guaranteed long-term support.

Pickering serves many electronics industries, including automotive, aerospace & defense, energy, industrial, communications, medical and semiconductor. We operate globally with direct operations in the US, UK, Germany, Sweden, France, Czech Republic, and China—with additional representation in countries throughout the Americas, Europe and Asia.

  • +44 (0)1255 687900
  • sales@pickeringtest.com
  • Stephenson Road
    Clacton on Sea, CO15 4NL
    United Kingdom

Filter Results By:

Products

Applications

Showing recent results 1546 - 1560 of 1659 products found.

  • PXI Dual 4 to 1 RF Multiplexer 3GHz 50 Ohm SMB

    40-872-002 - Pickering Interfaces Ltd.

    A 50 Ohm 4 to 1 PXI RF MUX available with 1, 2 or 4 banks in a single PXI slot. All versions exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths of this RF MUX has been minimized by careful attention to the mechanical and electrical design.

  • PXI Dual SP6T Multiplexer 18GHz 50, SMA

    40-785B-522 - Pickering Interfaces Ltd.

    The 40-785B range of PXI Microwave Multiplexers are available as a single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers. The single slot remote multiplexer versions occupy less PXI panel space and allow the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications it can shorten the length of RF cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.5m interface cable. These PXI Microwave multiplexer modules are suitable for constructing complex microwave switching networks and provide a range of switching configurations to suit most applications. Connection is by high performance SMA, SMA-2.9 and SMA-2.4 connectors for 50 versions. These modules offer high RF & Microwave performance with applications mainly in the Microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra-high isolation are critical.

  • PXI Dual 4 to 1 RF MUX SMB 75 Ohm

    40-832-002 - Pickering Interfaces Ltd.

    The 40-832 is a 75 Ohm 4 to 1 RF MUX available with 1, 2 or 4 banks in a single PXI slot. All versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The design of the 40-832 minimizes the injection of noise and unwanted signals into the signal path by careful attention to the mechanical and electrical design.

  • PXI 4x3 20GHz Matrix with Termination

    40-787-528-4X3-T - Pickering Interfaces Ltd.

    The 40-787 Microwave BRIC platform is designed to provide a solution for complex RF matrix applications. Using a common mechanical platform the module can be constructed to provide scaleable non-blocking or blocking microwave matrix for frequencies to at least 20GHz. The standard configurations provide up to a 4x4 matrix. More complex matrix can be constructed by adding further switching functions and other devices inside the module. The matrix is available with optional terminated inputs to avoid the creation of standing waves on unconnected input cables. A Loop Thru option allows the matrix size to be expanded by combining a number of modules with additional cables, enabling 8x4 or even 8x8 matrix to be constructed.

  • PXI Dual Microwave SPDT Relay 18GHz 50 SMA

    40-780A-522 - Pickering Interfaces Ltd.

    This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).

  • PXI Dual SP6T Multiplexer 2.5GHz 75, 1.6/5.6

    40-785B-752 - Pickering Interfaces Ltd.

    The 40-785B range of PXI Microwave Multiplexers are available as a single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers. The single slot remote multiplexer versions occupy less PXI panel space and allow the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications it can shorten the length of RF cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.5m interface cable. These PXI Microwave multiplexer modules are suitable for constructing complex microwave switching networks and provide a range of switching configurations to suit most applications. Connection is by high performance SMA, SMA-2.9 and SMA-2.4 connectors for 50 versions. These modules offer high RF & Microwave performance with applications mainly in the Microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra-high isolation are critical.

  • PXI Dual 8 to 1 RF MUX MCX 75 Ohm

    40-834-102 - Pickering Interfaces Ltd.

    The 40-834 is a 75 Ohm 8 to 1 RF MUX available with 1 or 2 banks in a single PXI slot. All versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The design of the 40-834 minimizes the injection of noise and unwanted signals into the signal path by careful attention to the mechanical and electrical design.

  • PXI Triple Microwave SPDT Relay 18GHz 50 SMA

    40-780A-523 - Pickering Interfaces Ltd.

    This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).

  • PXI Dual Microwave Transfer Switch 18GHz 50 SMA

    40-782A-522 - Pickering Interfaces Ltd.

    This range of PXI microwave transfer switch modules has a characteristic impedance of 50 and is available in versions with maximum operating frequencies of 18GHz, 26.5GHz or 40GHz. Connections are made via front panel mounted high quality RF coaxial connectors, SMA or SMA 2.9, depending upon the frequency range. Transfer switches have four ports with two possible switch states. In the default (de-energized) state, ports 1 to 2 and 3 to 4 have signal paths between them. In the energized state the signal paths are between ports 1 to 3 and 2 to 4 (see diagrams on data sheet). Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required.

  • Octal 4 to 1 50 600MHz PXI RF Multiplexer

    40-760-008 - Pickering Interfaces Ltd.

    This 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk. These RF multiplexers exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 600MHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths has been minimized by careful attention to the mechanical and electrical design. User connections are made via SMB connectors; you can find the associated RF cable & connector accessories data sheet under the downloads tab above.

  • PXI Dual 4 to 1 RF Multiplexer 3GHz 50 Ohm SMB Terminated

    40-876-002 - Pickering Interfaces Ltd.

    The 40-876 is a 50 Ohm 4 to 1 RF MUX available with 1, 2 or 4 banks in a single PXI slot. Additionally, extra switching allows the common connection to be terminated into 50 Ohm, maintaining signal integrity. All versions exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths of the 40-876 has been minimized by careful attention to the mechanical and electrical design.

  • PXI 4x4 10GHz Matrix with Loop-Thru

    40-787-518-4X4-L - Pickering Interfaces Ltd.

    The 40-787 Microwave BRIC platform is designed to provide a solution for complex RF matrix applications. Using a common mechanical platform the module can be constructed to provide scaleable non-blocking or blocking microwave matrix for frequencies to at least 20GHz. The standard configurations provide up to a 4x4 matrix. More complex matrix can be constructed by adding further switching functions and other devices inside the module. The matrix is available with optional terminated inputs to avoid the creation of standing waves on unconnected input cables. A Loop Thru option allows the matrix size to be expanded by combining a number of modules with additional cables, enabling 8x4 or even 8x8 matrix to be constructed.

  • 6U High-Density PXI RF Matrices

    Pickering Interfaces Ltd.

    Pickering's 6U high-density matrices are suitable for switching frequencies to beyond 250MHz. The 45- 720A module is available in 50 and 75 Ohm versions with a choice of coaxial connectors. It is intended for the easy construction of high-performance bidirectional matrix switching systems. Automatic Isolation Switches are located on all coaxial connectors, these disconnect the matrix from the external test fixture - this maximizes isolation and RF performance.

  • PXI Remote Mount Single SP6T Multiplexer 40GHz 50, SMA-2.9, Terminated

    40-785B-541-TE - Pickering Interfaces Ltd.

    The 40-785B range of PXI Microwave Multiplexers are available as a single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers. The single slot remote multiplexer versions occupy less PXI panel space and allow the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications it can shorten the length of RF cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.5m interface cable. These PXI Microwave multiplexer modules are suitable for constructing complex microwave switching networks and provide a range of switching configurations to suit most applications. Connection is by high performance SMA, SMA-2.9 and SMA-2.4 connectors for 50 versions. These modules offer high RF & Microwave performance with applications mainly in the Microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra-high isolation are critical.

  • PXI Remote Mount Single SP6T Multiplexer 26.5GHz 50, SMA-2.9, Terminated

    40-785B-531-TE - Pickering Interfaces Ltd.

    The 40-785B range of PXI Microwave Multiplexers are available as a single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers. The single slot remote multiplexer versions occupy less PXI panel space and allow the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications it can shorten the length of RF cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.5m interface cable. These PXI Microwave multiplexer modules are suitable for constructing complex microwave switching networks and provide a range of switching configurations to suit most applications. Connection is by high performance SMA, SMA-2.9 and SMA-2.4 connectors for 50 versions. These modules offer high RF & Microwave performance with applications mainly in the Microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra-high isolation are critical.