Pickering Interfaces Ltd.

Pickering Interfaces, a global company, designs and manufactures high-quality modular signal switching and simulation for use in electronic test and verification. We offer the largest range of switching and simulation products in the industry for PXI, LXI and PCI applications, with over 1,000 in PXI alone. Our products are specified in test systems installed throughout the world and have a reputation for providing excellent reliability and value.

Our commitment to delivering you high-quality products does not just extend to our switching and simulation products. We also offer a full range of supporting cable and connector solutions, diagnostic test tools and software, including our signal routing software, Switch Path Manager and software drivers.

Our products have a history of longevity, typically 15–20 years, which is critical to many of our customers. All products manufactured by us come with a standard 3-year warranty and include guaranteed long-term support.

Pickering serves many electronics industries, including automotive, aerospace & defense, energy, industrial, communications, medical and semiconductor. We operate globally with direct operations in the US, UK, Germany, Sweden, France, Czech Republic, and China—with additional representation in countries throughout the Americas, Europe and Asia.

  • +44 (0)1255 687900
  • Stephenson Road
    Clacton on Sea, CO15 4NL
    United Kingdom

Filter Results By:

Products

Applications

Showing recent results 1591 - 1605 of 1660 products found.

  • PXI Dual 3-Channel 10A Solid State MUX

    40-666-011 - Pickering Interfaces Ltd.

    The 40-666 is a high current multiplexer available in dual 3-channel or single 6-channel configurations occupying two slots of PXI chassis. Each multiplexer switch uses a fully isolated solid state relay which has been designed to offer fast operation under hot switching conditions and high inrush current with no operational life degradation. Each multiplexer channel can support 10A of continuous current and switch up to 200V signals. The switches can sustain inrush currents in excess of 50A. AC or DC signals can be switched since the switch is polarity insensitive. Note:The 40-666-011 supersedes the 40-666-001 which is functionally the same but withsome changes in specification. A data sheet for the 40-666-001 can be found in the40-666/667 User Manual.

  • High-Density PXI Switch Matrix Modules

    Pickering Interfaces Ltd.

    Pickering's range of high-density switch matrix modules is a cost-effective solution for applications that require high-density matrices in the PXI format. The ability to expand to larger matrices is possible by connecting together multiple modules. Reed relay versions use high quality sputtered ruthenium reeds that exhibit excellent contact performance under low and medium level switching conditions, solid-state relay versions available for high speed and long life and electro-mechanical versions for current handling up to 2 Amps.

  • PXI Single 24x8 Matrix, 1 Pole Switching

    40-521-021 - Pickering Interfaces Ltd.

    An ultra high density matrix module is configured as a 24x8, this range is availablein a choice of reed relay formats: 1-pole (shown here), 2-pole and 1-Pole screened. The screenedversion is suitable for switching signals up to 50MHz. Typical applications include signal routing in Functional ATE and data acquisitionsystems. These PXI matrix cards are constructed using high reliability RutheniumElectro-Plated Reed Relays, offering >10e8 operations to give maximum switchingconfidence with long life and stable contact resistance.

  • PXI Single 16 to 1 RF Multiplexer, 8GHz 50Ω SMA, Terminated

    40-883A-002 - Pickering Interfaces Ltd.

    The 40-883A-002 is a single 16 to 1 50Ω RF multiplexer with 8GHz bandwidth and automatic terminationof unused signal channels. It is available in 8 to 1 and 16 to 1 configurations in two and three PXI slots respectively.. It exhibits low VSWR over the full operating frequency range and consistent and flat insertion loss characteristics. The use of solid state switches ensure a long service life with no wear out mechanism, making it ideal for ATE systems requiring frequent and fast operating RF switching. This RF Multiplexer can handle RF input powers of up to +36dBm and is able to sustain frequent hot switching without performance degradation.

  • PXI Solid-State SPST Switch, 3-Channel 25A 100V

    40-184-002 - Pickering Interfaces Ltd.

    This range of PXI high power switches support 6-off high current SPST switches into two PXI slots or 3-off high current SPST switches into one PXI slot. Each SPST switch uses a fully isolated solid-state relay which has been designed to offer fast operation under hot switching conditions and high inrush current with no operational life degradation. Each PXI solid-state SPST switch can support 25A of continuous current and switch up to 100V signals. The switch cansustain inrush currents of up to 90A. AC or DC signalscan be switched since the switch is polarity insensitive.

  • PXI Strain Gauge Simulator Module 2-Channel, 3k

    40-265-102 - Pickering Interfaces Ltd.

    The 40-265 range consists of 6, 4 or 2 channel modules (this version is the 2-channel, 3k) that simulate the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems. The range provides a simple way of replacing in house developed sensors with a low cost simulator having excellent performance. The 40-265 uses the same resistor bridge techniques that real life strain gauges are based on, ensuring accurate emulation under all conditions. Each simulator channel includes an independent input for the Excitation Voltage and a bridge output. The Excitation Voltage port can be driven by an AC or a DC source. The bridge circuit includes three fixed resistors and a fourth programmable resistor that can be adjusted over a narrow resistance range with fine adjustment capability and excellent accuracy. The adjustment range provided is sufficient to simulate quarter, half or full bridge circuits. The standard bridge impedances are 350, 1k, 1.5k, 2k and 3k. These modules are extremely simple to use, the variable resistor element can be programmed using a simple resistance call. The module supplies the user with the resistance value required to balance the bridge, and the resistance call to the simulator can be varied above and below this value to simulate extension and compression of the strain gauge resistor.

  • PXI Dual 3-Channel 30A Solid State MUX

    40-667-011 - Pickering Interfaces Ltd.

    The 40-667 is a high current multiplexer available in dual 3-channel or single 6-channel configurations occupying two slots of PXI chassis. Each multiplexer switch uses a fully isolated solid state relay which has been designed to offer fast operation under hot switching conditions and high inrush current with no operational life degradation.Each multiplexer channel can support 30A of continuous current and switch up to 40V signals. The switches can sustain inrush currents in excess of 120A. AC or DC signals can be switched since the switch is polarity insensitive.Note: The 40-666-011 supersedes the 40-666-001 which is functionally the same but with some changes in specification. A data sheet for the 40-666-001 can be found in the 40-666/667 User Manual.

  • Single 8x8 1-Pole High-Density PXI Matrix Module

    40-520-204 - Pickering Interfaces Ltd.

    The 40-520 family of high-density PXI matrices is available in 22 different configurations with up to 256 crosspoints. The choice of six bus widths (x16, x12, x8, x6, x4 and x2) enables competitively priced solutions using Pickering Electronics instrumentation quality reed relays. These relays offer very long life with good low-level switching performance and excellent contact resistance stability. Typical applications include signal routing in ATE and data acquisition systems.

  • PXI Strain Gauge Simulator Module 6-Channel, 1k

    40-265-206 - Pickering Interfaces Ltd.

    The 40-265 range consists of 6, 4 or 2 channel modules (this version is the 6-channel, 1k) that simulate the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems. The range provides a simple way of replacing in house developed sensors with a low cost simulator having excellent performance. The 40-265 uses the same resistor bridge techniques that real life strain gauges are based on, ensuring accurate emulation under all conditions. Each simulator channel includes an independent input for the Excitation Voltage and a bridge output. The Excitation Voltage port can be driven by an AC or a DC source. The bridge circuit includes three fixed resistors and a fourth programmable resistor that can be adjusted over a narrow resistance range with fine adjustment capability and excellent accuracy. The adjustment range provided is sufficient to simulate quarter, half or full bridge circuits. The standard bridge impedances are 350, 1k, 1.5k, 2k and 3k. These modules are extremely simple to use, the variable resistor element can be programmed using a simple resistance call. The module supplies the user with the resistance value required to balance the bridge, and the resistance call to the simulator can be varied above and below this value to simulate extension and compression of the strain gauge resistor.

  • PXI Strain Gauge Simulator Module 6-Channel, 2k

    40-265-306 - Pickering Interfaces Ltd.

    The 40-265 range consists of 6, 4 or 2 channel modules (this version is the 6-channel, 2k) that simulate the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems. The range provides a simple way of replacing in house developed sensors with a low cost simulator having excellent performance. The 40-265 uses the same resistor bridge techniques that real life strain gauges are based on, ensuring accurate emulation under all conditions. Each simulator channel includes an independent input for the Excitation Voltage and a bridge output. The Excitation Voltage port can be driven by an AC or a DC source. The bridge circuit includes three fixed resistors and a fourth programmable resistor that can be adjusted over a narrow resistance range with fine adjustment capability and excellent accuracy. The adjustment range provided is sufficient to simulate quarter, half or full bridge circuits. The standard bridge impedances are 350, 1k, 1.5k, 2k and 3k. These modules are extremely simple to use, the variable resistor element can be programmed using a simple resistance call. The module supplies the user with the resistance value required to balance the bridge, and the resistance call to the simulator can be varied above and below this value to simulate extension and compression of the strain gauge resistor.

  • Single 24x4 1-Pole High-Density PXI Matrix Module

    40-520-402 - Pickering Interfaces Ltd.

    The 40-520 family of high-density PXI matrices is available in 22 different configurations with up to 256 crosspoints. The choice of six bus widths (x16, x12, x8, x6, x4 and x2) enables competitively priced solutions using Pickering Electronics instrumentation quality reed relays. These relays offer very long life with good low-level switching performance and excellent contact resistance stability. Typical applications include signal routing in ATE and data acquisition systems.

  • PXI Strain Gauge Simulator Module 4-Channel, 2k

    40-265-304 - Pickering Interfaces Ltd.

    The 40-265 range consists of 6, 4 or 2 channel modules (this version is the 4-channel, 2k) that simulate the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems. The range provides a simple way of replacing in house developed sensors with a low cost simulator having excellent performance. The 40-265 uses the same resistor bridge techniques that real life strain gauges are based on, ensuring accurate emulation under all conditions. Each simulator channel includes an independent input for the Excitation Voltage and a bridge output. The Excitation Voltage port can be driven by an AC or a DC source. The bridge circuit includes three fixed resistors and a fourth programmable resistor that can be adjusted over a narrow resistance range with fine adjustment capability and excellent accuracy. The adjustment range provided is sufficient to simulate quarter, half or full bridge circuits. The standard bridge impedances are 350, 1k, 1.5k, 2k and 3k. These modules are extremely simple to use, the variable resistor element can be programmed using a simple resistance call. The module supplies the user with the resistance value required to balance the bridge, and the resistance call to the simulator can be varied above and below this value to simulate extension and compression of the strain gauge resistor.

  • PXI Solid State Versatile Multiplexer

    40-683-001 - Pickering Interfaces Ltd.

    The 40-683 Very High Density Versatile Multiplexer module features a wide range of selectable switching configurations. The 40-683 is especially useful where a high density MUX array is required that can adapt to different test configurations for different test targets, or where a test system may have to be reconfigured in the future. The 40-683 uses high performance solid state switching to ensure a service life of greater than 10 years and fast operation.

  • PXI Single 6 to 1 RF Multiplexer 6GHz 50 Ohm SMA Terminated

    40-881-001 - Pickering Interfaces Ltd.

    The 40-881 is a 50 Ohm 6 to 1 6GHz multiplexer available as a single or dual MUX in one and two PXI slots respectively. The 40-881 exhibits low VSWR characteristic over the full operating frequency range and consistent insertion loss characteristics. The use of solid state switches ensure a long service life with no wear out mechanism, making the 40-881 ideal for ATE systems requiring frequent and fast operating RF switching with no contact bounce.

  • PXI 6x2 30A Solid State Matrix

    40-554-011 - Pickering Interfaces Ltd.

    The 40-554 is a high current matrix available in 6x2 configuration occupying twoslots of PXI chassis. Each matrix crosspoint uses a fully isolated solid state relaywhich has been designed to offer fast operation under hot switching conditions andhigh inrush current with no operational life degradation. Each matrix switching pathcan support 30A of continuous current and switch up to 40V signals. The switchescan sustain inrush currents in excess of 120A. AC or DC signals can be switched sincethe switch is polarity insensitive. Note:The 40-554-011 supersedes the 40-554-001 which is functionally the same butwith some changes in specification. A data sheet for the 40-554-001 can be foundin the 40-553/554 User Manual.