Pickering Interfaces Ltd.

Pickering Interfaces, a global company, designs and manufactures high-quality modular signal switching and simulation for use in electronic test and verification. We offer the largest range of switching and simulation products in the industry for PXI, LXI and PCI applications, with over 1,000 in PXI alone. Our products are specified in test systems installed throughout the world and have a reputation for providing excellent reliability and value.

Our commitment to delivering you high-quality products does not just extend to our switching and simulation products. We also offer a full range of supporting cable and connector solutions, diagnostic test tools and software, including our signal routing software, Switch Path Manager and software drivers.

Our products have a history of longevity, typically 15–20 years, which is critical to many of our customers. All products manufactured by us come with a standard 3-year warranty and include guaranteed long-term support.

Pickering serves many electronics industries, including automotive, aerospace & defense, energy, industrial, communications, medical and semiconductor. We operate globally with direct operations in the US, UK, Germany, Sweden, France, Czech Republic, and China—with additional representation in countries throughout the Americas, Europe and Asia.

  • +44 (0)1255 687900
  • Stephenson Road
    Clacton on Sea, CO15 4NL
    United Kingdom

Filter Results By:

Products

Applications

Showing recent results 226 - 240 of 1660 products found.

  • PXI BRIC4 FIBO Matrix Dual 124x4 2pin brkout

    40-592A-014 - Pickering Interfaces Ltd.

    The 40-592A FIBO (Fault Insertion Break-Out) Matrix Module is a large-scale high density switching matrix based on the Pickering BRIC format. The fault insertion BRICs are designed for applications requiring the simulation of a variety of faults in complex, high pin count, applications involving sensors and control units. Typical faults that can be simulated are open-circuits, short circuits to ground or battery, or short-circuits between input/output lines. Typical applications are in automotive and aerospace industries which involve safety or mission critical systems that have to behave predictably when cabling or sensor faults occur.

  • PXI Single 4 to 1 RF Multiplexer 3GHz 50 Ohm SMB

    40-872-001 - Pickering Interfaces Ltd.

    The 40-872 is a 50 Ohm 4 to 1 RF MUX available with 1, 2 or 4 banks in a single PXI slot. All versions exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths of the 40-872 has been minimized by careful attention to the mechanical and electrical design. Need a higher density solution but can accept lower performance? Try the 40-75 Ohm 10 off 4 to 1 MUX.

  • Quad 8 to 1 Terminated 50 600MHz PXI RF Multiplexer

    40-763-004 - Pickering Interfaces Ltd.

    This 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk. These RF multiplexers exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 600MHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths has been minimized by careful attention to the mechanical and electrical design. User connections are made via SMB connectors; you can find the associated RF cable & connector accessories data sheet under the downloads tab above.

  • PXI 8-Slot BRIC 174x8 2A 2-Pole

    40-565B-102-174X8 - Pickering Interfaces Ltd.

    These modules are 2 Amp high-density large PXI matrix modules with the ability to switch up to 2 Amps at 150VDC/100VAC. These 2A switch matrix modules are available in 2, 4 or 8-slot PXI sizes for most high-performance PXI matrix requirements. Constructed using quality electro-mechanical relays for high switching confidence. Typical applications include signal routing for Functional ATE systems. With this high level of switching density, these PXI matrix modules allow a complete Functional ATE system to be housed in a single 3U PXI chassis. Our BRIC modules allow the use of much lower cost 8 or 14-slot PXI chassis:

  • PXI Octal SPDT RF Switch 6GHz 50 SMA Terminated

    40-880-004 - Pickering Interfaces Ltd.

    A range of 50 SPDT RF switching with automatic termination of unused signals. Available as a dual switch in a 1 slot PXI module, a quad switch in a two slot PXI module or hex and octal switches in three slot PXI modules. These switches exhibit low insertion loss and VSWR through the use of high performance solid state switches. Solid state switches ensure a long service life with no wear out mechanism, making it ideal for ATE systems requiring frequent and fast operating RF switching.

  • PXI H. Density Digital I/O Module 32 bit O/C

    40-410-002 - Pickering Interfaces Ltd.

    The 40-410 range of Digital I/O Modules are suitable for operating external devices, such as heavy duty relays (power, RF and high voltage types), solenoids, lamps, or for interfacing with external logic such as a programmable instrument with a BCD interface. Two choices of output drive are available: TTL for interacting with external logic and Open Collector Transistor for operating external devices with voltages to 50VDC and currents to 500mA.

  • PXI Single Microwave SPDT Relay 2.5GHz 75 1.6/5.6

    40-780A-751 - Pickering Interfaces Ltd.

    This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).

  • PXI 5 Banks of 16 Channel 2 Pole MUX

    40-615-022-5/16/2 - Pickering Interfaces Ltd.

    High density multiplexer modules featuring a wide range of switching configurations, especially useful where a large number of small multiplexers are required. Typical applications include signal routing in ATE and data acquisition systems. Each module is factory configured into one of the configuration . Connections are made via a front panel 200-pin connector.

  • PXI Remote Mount Triple SP6T Multiplexer 50GHz 50, SMA-2.4

    40-785B-553-E - Pickering Interfaces Ltd.

    The 40-785B range of PXI Microwave Multiplexers are available as a single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers. The single slot remote multiplexer versions occupy less PXI panel space and allow the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications it can shorten the length of RF cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.5m interface cable. These PXI Microwave multiplexer modules are suitable for constructing complex microwave switching networks and provide a range of switching configurations to suit most applications. Connection is by high performance SMA, SMA-2.9 and SMA-2.4 connectors for 50 versions. These modules offer high RF & Microwave performance with applications mainly in the Microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra-high isolation are critical.

  • PXI Prototyping Module, 2-Slot no Connector

    40-225A-002 - Pickering Interfaces Ltd.

    Versatile PXI Breadboard with 65 sq cm (10 sq in) of Prototype AreaAccess to All PXI Power Supplies (+3.3, +5, +12 and -12VDC)Available in 1 or 2-Slot formatHas All Circuitry RemovedAvailable with either a blank front panel, or Fitted With One of a Selection of Industry Standard Connectors

  • PCIe to PXI Remote Control Interface Kit

    41-924-001-KIT - Pickering Interfaces Ltd.

    The kit is supplied with a PCIe card which can plug into any PC PCIe slot, a PXI module for insertion into Slot 1 of a PXI chassis and 3m lead to connect the two parts together. The interface uses a single lane PCIe connection from the PC to provide a software transparent link from the PC PCIe backplane to the PXI backplane. The supplied 3m shielded lead ensures the system has robust operation and an adequate separation distance between the PC and the PXI chassis.

  • PXI Triple SPDT RF Switch SMB 75 Ohm

    40-830-003 - Pickering Interfaces Ltd.

    The 40-830 is a 75 RF Switch available with 3 or 6 separate SPDT relays in a single PXI slot. Both versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. The switch banks have been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The design of the 40-830 minimizes the injection of noise and unwanted signals into the signal path by careful attention to the mechanical and electrical design.

  • PXI Potentiometer Module 4x12 Bit, 0 Ohm to 4K Ohm

    40-296-121-4/12 - Pickering Interfaces Ltd.

    The 40-296/40-295 series provides fully isolated variable resistors available as either adjustable resistors (40-295 series) or potentiometers (40-296 series). The 40-295 is a Programmable Resistor module with up to 18 channels of 8-bit resolution resistor chains in a single 3U PXI module. The flexible architecture allows these modules to also be supplied as 12, 16 or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The 40-296 version is wired as a potentiometer with two end connections and a wiper. They are ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications. Each model is available with a variety of channel counts to allow the user to choose the lowest cost solution for their application..

  • PXI 5A Power MUX, 4-Bank, 11-Channel

    40-651-003 - Pickering Interfaces Ltd.

    This range of high density power multiplexer modules is suitable for switching inductive/capacitive loads up to 5A at 250VAC. It is available in the following 1-pole multiplexer formats: 1-bank 48-channel. 2-bank 24-channel. 4-bank 11-channel. 8-bank 5-channel.Connections are made via a front panel 50-way male D-type connector.Power multiplexer modules are intended for switching heavy AC or DC loads or for slaving up to large external relays, contactors and solenoids.

  • PXI 4 x Changeover Switch 2.5GHz, 50 SMB

    40-710-514 - Pickering Interfaces Ltd.

    This RF switching card has a bank of four individual high performance RF changeover switches (50 or 75 Ohm, Bi-directional) with very low insertion loss, suitable for handling signals up to 2.5GHz. Applications include aerial switching, routing high frequency signals into oscilloscopes and analyzers. Available with a choice of connectors: SMA, SMB and Siemens 1.0/2.3 versions. BNC versions are also available with reduced bandwidth and 2 PXI slot occupancy. The 75 Ohm versions are suitable for high frequency video and telecommunication signals up to 2GHz.