Showing results: 46 - 60 of 70 items found.
-
HPC -
TEGAM Inc.
The TEGAM High Power Calibration System is the complete automated solution for calibrating through path and terminating RF power measurement devices from multiple manufacturers. It includes the signal generation, amplification and filtering necessary to achieve or exceed the devices original specifications with the most accurate High power measurement system available. Calibrate High Power RF Sensing devices up to 250 W with uncertainty less than 1%.
-
911A -
TEGAM Inc.
The Model 911A is a single channel digital thermometer compatible with type K, J, T or E thermocouple probes to provide a wide range of temperature measurements, (-418 °F to 2502 °F) and boasts a 2000 hour battery life using three AA batteries. The 911A provides dependable and uninterrupted portable measurement capability without expensive batteries, AC adapters or chargers.
-
CSP-F1 -
TEGAM Inc.
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
1740 -
TEGAM Inc.
Basic Accuracy: 0.02%Measurement Speed: 10 msRange : 20 m to 20 MResolution : 1 Programmable reference currentsGPIB, RS-232 (model 1740/GPIB) and PLC compatibilityKelvin Klips, Spade Lugs or Kelvin Probes availableEasy to operate and easy to integrate1-year warranty
-
8734 -
TEGAM Inc.
For measuring semi-soft materials within a restricted temperature range. Compact size makes this probe easy to transport. The 403 stainless steel sheath has a pointed tip and is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet.
-
TEGAM Inc.
Ohmmeters by Tegam including milli-ohmmeters, microohmmeters, megohmmeters, 4-wire probes, and microohmmeters
-
R1L-BR -
TEGAM Inc.
The R1L-B series Ohmmeter/Bonding Tester is a digital microohmmeter designed to measure resistances from 10 to 20 . It is used in applications such as metal bonding, switch, circuit breaker, circuit resistance and other contact and connection resistance tests as well as higher resistance measurements for circuit analysis and resistor testing up to 20 . The instruments utilize the four-terminal, Kelvin technique to eliminate errors caused by the resistance of the leads. Resistance readings are viewed on a 3 1/2 digit display,
-
868 -
TEGAM Inc.
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use. Model 868 reads in F and Model 869 reads in C.
-
8733 -
TEGAM Inc.
Multi-purpose probe for measuring air, liquids, soft materials, (e.g., water, ice cream, etc.). Compact size makes this probe easy to transport. The 403 stainless steel sheath is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet. Model 8733 is a Type K probe and Model 8753 is a Type T.
-
2340 -
TEGAM Inc.
The Model 2340/2350 High Voltage Amplifier expands the amplitude range of any standard, 50 function, pulse, or waveform generator to 400 volts p-p. Model 2340/2350 comes standard with a fixed gain of +50, and gains from 10 to 100 are available as special order.
-
RHT-20C -
TEGAM Inc.
TEGAM''s solution for monitoring relative humidity and temperature, the RHT series provides a linearized output current from 4-20 mA(model RHT-20C) or a linearized output voltage from 0-1VDC (model RHT-10V) representing temperature and humidity. Humidity readings are temperature compensated and the RHT transmitters only require an unregulated DC supply voltage of 6-30VDC.
-
8696 -
TEGAM Inc.
Model 8696, platinum RTD probe is designed for measuring air and other gaseous mediums. The sheath is 8" long and is constructed with #304 stainless steel. The probe tip is protected from temperature fluctuations by a perforated shield. The probe''s 4-inch handle is connected to a thermoplastic coil cord that extends from 1-1/2 feet to 5 feet.
-
8714A -
TEGAM Inc.
Type-K thermocouple probe. Ideal for temperature measurement of meats, plastics, and other semi-soft materials. The sheath is 3" long and 1/8" in diameter and is constructed with #304 stainless steel. The coil-type cord is constructed with a thermoplastic rubber jacket and is 1-1/2 feet in length and reaches up to 5 feet when fully extended.
-
8715A -
TEGAM Inc.
Type-K thermocouple probe. For monitoring hotplates, furnaces, molds, and other solid surfaces. The exposed thermocouple junction provides an accurate reading of surface temperature within 3 seconds. The sheath is 6" long with a 1/4" diameter flat tip. It is constructed with #304 stainless steel. The vinyl clad straight cord is 3-feet in length
-
819A -
TEGAM Inc.
The Model 819A digital thermometer is compatible with type K, J, or T thermocouple probes to provide a wide range of temperature measurements, (-346F to 2502F). The heavy-duty case is specifically designed for durability and resistance to contaminants such as dust and chemicals. It also features a tilt bail for hands-free or bench top operation. An optional protective rubber boot & belt clip, PN#8204, is available to protect the meter against drops and other physical stresses.