Showing results: 31 - 45 of 98 items found.
-
Model TAT -
Kusam Electrical Industries Limited
• 4 Digits Display For Input Signal:0 - 9999 • Output Signals Are Programmable. • Ultra-thin Dimension, 27mm width. • Non-Combustible PC Case .DIN Rail or Wall Mounting. • High Dielectric Strength ( AC 2KV / Min , Input / Output / Power )
-
8100 C -
Kusam Electrical Industries Limited
INPUT :• Input Voltage Range :Voltage: 55 ~ 300V AC, or 300 ~ 600V AC, 45 ~ 65Hz.P.T. Ratio Programmable upto 9999 / KV.• Input Voltage Over Range :Voltage : 200 % Continuous, 300 % of rating for 10 sec.• Input Current Range :Current : 110 % of rating. 0-1A or 0 - 5AC.T. Ratio programmable upto 9999 / 5A.Input Current Over Range:Current : 400 % Continuous, 2000 % of rating for 10 Sec.• Input Frequency : 45 Hz ~ 70 Hz.• Input Burden :Voltage 0.25 VA / Unit, Current 0.25VA / Unit, at 50 / 60HzOUTPUTDC Current: 0 20 m A DCLoad resistance drive: output drive 10 V DC maximum.DC Voltage: 0 -10 V DCLoad resistance drive: output drive 5mA maximumOutput Protection: No damage even if output is Open or Short Circuit.Output Response Time : £ 1 Sec.Digital Output : RS485 Output, Isolate Type with MODBUS RTU mode., 4800, 9600,19200Baud Rate, User Selectable.
-
KM 6300 -
Kusam Electrical Industries Limited
Measurement of current, voltage, active, reactive and apparent power, Power factor, line frequency, energy, harmonic and Maximum Demand.
-
Model KM 926 -
Kusam Electrical Industries Limited
• KM 926 designed according to the IEC 651 TYPE 2 & ANSIS1.4 TYPE 2 for sound level meter.• Instantaneous sound measure function.• Measurement Range : 30 ~ 130decibel• With two equivalent weighed sound pressure levels, A & C.• Fast & Slow dynamic characteristic modes.• AC & DC signed output for frequency analyzer level recorder, FFT analyzer, graphic recorder etc.
-
Model - PP01 -
Kusam Electrical Industries Limited
PP01 is designed for using together with portable gas detector. With advantages of simple & beautiful design, easy installation, small size, light weight, low noise, good stability, it’s suitable for long time continuous sampling toxic gas in the air.
-
Model TWL -
Kusam Electrical Industries Limited
• Aux. Power AC 85 ~ 265V or DC 85 ~ 300V• High Accuracy 0.1% RO at 23 °C ± 5 °C• Input / Output User Selectable• PC Plastic Case, DIN Rail or Wall Mounting• High Dielectric Strength (AC 1.5KV/Min, between Input / Output / Power)
-
LCR 459 -
Kusam Electrical Industries Limited
• Dual Displays provide quick tested results readouts, with L.C.R. display values up to 19999 counts and Q.D.R. display values up to 9999 counts • Test 4 parameters : Ls+(Q,D,Rs), Lp+(Q,D,Rp), • Cs+(Q,D,Rs), Cp+(Q,D,Rp) • RS-232 PC Interface • External DC Adapter functions • Set Hi / Lo limits using absolute values or percentage limits.
-
Model - KM CO-910 -
Kusam Electrical Industries Limited
KM-CO-910 Carbon Monoxide meter detects the presence of Carbon Monoxide (CO) & measures concentrations between 1-1000 parts per million(PPM). The meter indicates the presence of CO by a reading on the LCD & a beeper tone. The beeper function much like clicking of a geiger counter: above 200PPM, the beeper sounds continuously with the concentration of CO; from 35PPM to 200PPM, the beeper sounds discontinuously with the concentration of CO.
-
2736 -
Kusam Electrical Industries Limited
Voltage Function : 6000 counts LCD display Power, Ohm & Hz functions : 9999 counts LCD display, ACA clamp-on function : 4000 counts LCD display
-
TM 100 -
Kusam Electrical Industries Limited
• Standard : Confirms to IEC 942 Class 1.• Output Sound Level : 94dB and 114dB under reference.• Accuracy : ±0.3dB (20°C, 760 mm Hg)• Frequency of 1000 ± 0.1% Hz allows calibration with A / B / C or D weighting networks or linear.• Low Battery Indicator (LED).- Operating Temperature range : -10 ~ +50 C- Storage Temperature range : -40 ~ +65 C (with batteries removed).- Temperature Coefficient : 0 ~ 0.01 dB / C• Calibration of “1 and ½” ceramic microphones.• Altitude Effects : Approx. 0.1 dB decrease for each 2000 feet increase in altitude fromsea level to 12,000 feet elevation, or comparable atmospheric pressure change(approx. every 50 mm of Hg decrease).• Battery : Single 9V transistor Battery. (NEDA 1604)• Battery Life : Approx 100 hours.• Dimension : 48 x 48 x 138mm
-
Model - BX-616 -
Kusam Electrical Industries Limited
• Natural diffusion sampling method and high-sensitivity sensor, with high sensitivity and repeatability.• CSTN colorful LCD, large & clear.• Compact design, easy carrying.• High strength engineering plastics and compoundanti-slippery rubber; high strength, water-proof,dust-proof and explosion-proof.• Applicable to gas leakage underground tunnels, mines,pipelines etc.• 100,000 records storage capacity including peak value.
-
KM 918 A -
Kusam Electrical Industries Limited
* Temperature range : -10 ~ 60oC / (14 ~ 140oF)* Temperature accuracy : ± 1o C / (± 1.8oF)* Temperature resolution: 0.1 oC /oF* Humidity range: 20% RH ~ 95 % RH* Humidity resolution: 1 % RH* Humidity Accuracy: 8 % RH* Clock, temperature and humidity display * Room and outside temperature* Room Humidity display* Maximum or minimum memorization function * Alarm clock function at a desired hour.* Power : 1.5V DC AAA battery
-
KM 918 -
Kusam Electrical Industries Limited
* Dual display Temperature & Humidity* Accurate NTC sensor* Measures temperature in °C/°F* Dew point and Wet bulb Function* MAX MIN / MAX-MIN / AVG / & HOLD function* Portability and simplicity one-hand operation* Quick response R.H. sensor* Display Back-light* Auto Power Off* External probe* CE-Mark approval
-
8100 B -
Kusam Electrical Industries Limited
• Input Voltage Range : Voltage: 55 ~ 300V AC, 45 ~65Hz or300 ~ 600V AC, 45 ~ 65Hz.P.T. Ratio programmable upto 9999/KV• Input Voltage Over Range : Voltage : 200% Continuous,300% of rating for 10 sec.• Input Current Range: Current : 110% for rating. 0-1A or 0-5A.C.T. Ratio programmable upto 9999/5A.• Input Current Over Range : Current : 400% Continuous,2000% of rating for 10 Sec.• Input Frequency: 45Hz ~ 70 Hz.• Input Burden: Voltage 0.25VA / Unit, Current 0.25VA / Unit, at 50/60Hz
-
Model KM LUX 99 -
Kusam Electrical Industries Limited
• Precise & easy readout.• High accuracy in measuring.• LSI - circuit use provides high reliability & durability.• Permits a wide range of light measurements.• Low Battery Indication.• Auto zero adjust.• Compact, light-weight, & excellent operation.• LCD display can clearly read out even in High Ambient Light• LCD display provides low power consumption.• Separate LIGHT SENSOR allows user take measurements at an optimum position.