Teledyne DALSA

DALSA Corporation is an international high performance semiconductor and electronics company that designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing specialized wafer foundry services.

  • 519 886 6000
  • 519 886 8023
  • sales.americas@dalsa.com
  • 605 McMurray Road
    Suite 142
    Waterloo, Ontario N2V 2E9
    Canada

Filter Results By:

Products

Applications

Showing recent results 1 - 15 of 66 products found.

  • CCD Foundry Services

    Teledyne DALSA

    Teledyne DALSA Semiconductor’s 150mm CCD process offers surface or buried channel operation at up to 15V with two or three layers of polysilicon and one, two or three layers of metal. A modular processing approach allows our foundry customers to adjust process parameters to meet the most demanding requirements for CTE (>99.999%), charge storage capacity, and dark current (<1nA/cm2). The base process uses 1X projection lithography with 2.5µm design rules, allowing die sizes of up to 100mm X 100mm. Where required, tighter alignment tolerances and smaller feature sizes can be obtained by using 5X lithography, using a mix and match or all-stepper approach. The maximum die size attainable with the stepper is 22mm X 22mm, but larger sensors can be fabricated using stitching.

  • Complete Vision System

    BOA2 - Teledyne DALSA

    Introducing BOA2: a complete vision system in one smart camera. Featuring our highest smart camera resolution yet, BOA2 combines lighting, image capture, processing, and easy-to-use embedded vision software into a convenient single device with a variety of I/O and mounting options.

  • CoalXPress Frame Grabber

    Xtium-CXP PX8 - Teledyne DALSA

    The Xtium™-CXP is based on the industry standard PCI Express™ Gen 2.0 expansion bus to deliver high speed access to host memory. The Xtium series offers high performance frame grabbers for CameraLink, CameraLink HS and CoaXPress interface standards. The Xtium Series takes full advantage of PCIe Gen 2.0 platform to deliver bandwidth up to 3.4 GB/s using PCIe x8 slots. By enabling maximum sustained throughput and ready-to-use image data, the Xtium series minimizes CPU usage and improves processing times for the host applications. In addition, the Xtium series offers enhanced memory architecture to handle area and line scan, monochrome and color cameras. In addition, the Xtium-CXP series support image acquisition rate of up to 6.25 Gb/s from four input channels.

  • CL LX1 Base Frame Grabber

    Xcelera-CL LX1 Base - Teledyne DALSA

    Building on the field proven technology and performance of DALSA’s X64 frame grabbers, the X64 Xcelera™ Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility.The PCIe point-to-point host interface allows simultaneous image acquisition and transfer with little intervention from the host CPU.The X64 Xcelera -CL LX1 Base is a cost effective frame grabber based on the PCI Express x1 interface. Fully compliant with Camera Link (V. 1.20) specifications, the Xcelera-CL LX1 supports single Base cameras and can acquire images from a wide variety of multi-tap area and line scan, color and monochrome cameras.

  • CL MX4 Frame Grabber

    Xtium-CL MX4 - Teledyne DALSA

    Building on the field proven capability of Teledyne DALSA’s Xcelera frame grabber series, the Xtium™-CL MX4 is based on industry standard PCI Express™ Gen 2.0 expansion bus to deliver high speed access to host memory. The new Xtium series offers higher bandwidth to sustain Camera Link® 80-Bit modes over longer cable distances and supports a wide variety of area and line scan color/monochrome cameras, all in a compact, half-length, single slot solution.

  • CL PX4 Dual Frame Grabber

    Xcelera-CL PX4 Dual - Teledyne DALSA

    Building on the field proven technology and performance of Teledyne DALSA’s X64 frame grabbers the new Xcelera Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility. The PCIe host interface is a point to point host interface allowing simultaneous image acquisition and transfer without loading the system bus and involving little intervention from the host CPU. The X64 Xcelera-CL PX4 Dual is a highly versatile PCIe frame grabber capable of acquiring images from two independent Camera Link™ Base cameras and performing image transfers at rates up to 1024MB/s. Its low cost, combined with its ability to support multiple tap configurations from area and linescan monochrome/RGB cameras simultaneously; in addition to its onboard FPGA Bayer decoding and real-time shading correction makes the X64 Xcelera-CL PX4 Dual an ideal solution to a wide variety cost-sensitive applications.

  • CL PX4 Frame Grabber

    Xtium-CL PX4 - Teledyne DALSA

    Building on the field proven capability of Teledyne DALSA’s Xcelera frame grabber series, the Xtium™-CL PX4 is based on industry standard PCI Express™ Gen 2.0 expansion bus to deliver high speed access to host memory. The new Xtium series offers higher bandwidth to sustain Camera Link® 80-Bit modes over longer cable distances and supports a wide variety of area and line scan color/monochrome cameras, all in a compact, half-length, single slot solution.

  • CL PX4 Full Frame Grabber

    Xcelera-CL PX4 Full - Teledyne DALSA

    Building on the field proven technology and performance of Teledyne DALSA’s X64 frame grabbers the new Xcelera Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility. The PCIe host interface is a point to point host interface allowing simultaneous image acquisition and transfer without loading the system bus and involving little intervention from the host CPU. The X64 Xcelera-CL PX4 Full is a Camera Link frame grabber that is based on the PCI Express x4 interface. Compatible with a Base, Medium or Full Camera Link® camera, the X64 Xcelera-CL PX4 Full supports a wide variety of multi-tap area and line scan color and monochrome cameras. For greater versatility, the X64 Xcelera-CL PX4 Full board can interface with camera pixel depths and tap configurations not covered by the Camera Link standard. For example, the Xcelera-CL PX4 Full can support 10-taps or higher with 8-bits per tap.

  • CL PX4 SE Frame Grabber

    Xcelera-CL PX4 SE - Teledyne DALSA

    The X64 Xcelera-CL PX4 SE is a highly versatile PCIe frame grabber capable for one Camera Link™ Base, Medium, or Full camera and performing image transfers at rates up to 1024MB/s. Its low cost, combined with its ability to support multiple tap configurations from area and linescan monochrome/RGB cameras simultaneously; in addition to its onboard FPGA Bayer decoding and real-time shading correction makes the X64 Xcelera-CL PX4 SE an ideal solution to a wide variety of cost-sensitive applications.

  • CL+ PX8 Full Frame Grabber

    Xcelera-CL+ PX8 Full - Teledyne DALSA

    The X64 Xcelera-CL+ PX8 Full has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the host, providing traceability when errors do occur and permitting recovery from those errors.

  • Medical And Dental X-Ray

    Teledyne DALSA

    Teledyne DALSA offers powerful, innovative CMOS X-Ray detectors combining industry-leading performance with cutting-edge features for applications such as orthopedic and surgical radiology, mammography, intra- and extra-oral dental radiology, CT, and bone densitometry

  • MEMS Foundry Services

    Teledyne DALSA

    Teledyne DALSA is one of the world’s foremost pure-play MEMS foundries. We operate over 41,000 sq ft (3800m2) of clean rooms, 24/7, using both 150mm and 200mm wafers. Our comprehensive MEMS toolbox allows us to manufacture in high volume for a wide range of applications.Across many device types, from micro-mirrors for telecommunication, gyro sensors for game controllers, microfluidic devices for miniaturized medical systems, automotive pressure and inertial sensors for automobiles or microphones for smartphones, Teledyne DALSA has delivered high volume MEMS production for innovations that reduce both size and power consumption even as they increase performance.We are ISO/TS 16949 and ISO 14001 registered and RoHS compliant, well equipped and experienced to meet the demanding requirements of customers that serve all the main MEMS markets including consumer, automotive, industrial and biotech/medical.

  • Mixed-Signal Design

    Teledyne DALSA

    Teledyne DALSA’s mixed-signal group, formerly known as Axiom IC, delivers high-performance, high-quality data-converter designs and IP blocks for the industrial, professional, scientific, imaging and audio markets. Based in the Kennispark business and science park in Enschede, The Netherlands, the group works in close cooperation with the University of Twente and supports PhD students and trainees to stay involved in the newest CMOS design methodologies and technologies.

  • Industrial X-Ray

    Teledyne DALSA

    Teledyne DALSA offers powerful, innovative CCD and CMOS X-Ray detectors combining industry-leading performance with cutting-edge features for industrial and scientific applications such as NDT (non destructive testing) in evaluation, troubleshooting, research, and quality control.

  • Large-Area CMOS X-Ray Detector

    Rad-icon - Teledyne DALSA

    Teledyne DALSA’s Rad-icon product family of large-area digital x-ray cameras offers users a high-speed, high-performance x-ray imaging detector with a fast, reliable PC interface (either GigE or CameraLink) for easy integration.