Showing results: 166 - 180 of 223 items found.
-
Teledyne Relays
Teledyne Relays' packaged SPDT Indium Phosphide Active RF Switches provide low insertion loss and high linearity, with bandwidths from DC up to 60GHz. These switches also maintain excellent signal integrity beyond 40Gbps, and have a very compact package size of 3mm x 3mm x 1mm. Teledyne's Active RF switches are ideal for test and measurement systems, microwave communication, and radar applications.
-
-
Part No.s CCR-53S/CR-53S -
Teledyne Relays
Latching/Failsafe, SPDT, 50Ω impedanceAvailable in Commercial and Elite models, with SMA connectors.DC-26.5GHz
-
Part No. SGRF312 -
Teledyne Relays
TO-5 hermetically sealed package, SMT J-lead mounted, non-latching, DPDT, with high insertion loss repeatabilityBandwidth: DC - 8GHzResistive: 1A /28Vdc
-
Part No. S422 -
Teledyne Relays
TO-5 hermetically sealed package, SMT-J mounted, magnetic-latching DPDTAvailable options include:S422D - coil transient suppression diodeS422DD - polarity protection diodeResistive: 1 Amp/28Vdc Inductive: 200 mA/28Vdc (320 mH) Lamp: 100 mA/28Vdc
-
Teledyne Relays
Electromechanical Relays by Teledyne Relays - established reliability & military relays, commercial, high performance, military cross reference, RF and signal integrity, and more.
-
Part No. CCR-58S -
Teledyne Relays
Normally open, SP10T Multi-Throw switch, 50Ω impedanceAvailable in Commercial models, with SMA connectorsDC-18GHz
-
Teledyne Relays
What is the difference between Failsafe and Latching?Failsafe switches are Normally Open; when a position is energized, the Open contacts will Close, until voltage is removed. It will then revert back to the Normally Open position. These are commonly used in applications where a default known state is required.Latching switches will remain in the last energized position until the next position is energized. It is commonly used in applications where power consumption is critical or limited.
-
Part No. InPD1012-30 -
Teledyne Relays
Non-terminated SPDT Indium Phosphide Active RF Switch • 3mm x 3mm x 1mm package size • 100ns switching time• Monolithic solid-state switch with no mechanical wear• Test board with K-connectors can be providedDC-30GHz
-
Part No. CCP-18D -
Teledyne Relays
Failsafe, Low PIM, SP3T or SP4T, Multi-Throw switch, 50Ω impedance Available with 7/16 DIN connectorsDC-3GHz
-
Part No. CCR-48K/CR-48K -
Teledyne Relays
Normally open, SP3T, SP4T, or SP6T Multi-Throw switch, 50Ω impedance Available in Commercial and Elite models, with 2.92mm connectorsDC-40GHz
-
Part No. CCP-47N -
Teledyne Relays
Normally Open, Low PIM, SP3T, SP4T, or SP6T, Multi-Throw switch, 50Ω impedance Available with N connectorsDC-3GHz
-
Part No. 712 -
Teledyne Relays
TO-5 hermetically sealed package, through-hole mounted, non-latching DPDTAvailable options include:712D - coil transient suppression diode712TN - coil transient suppression diode, and transistor driverResistive: 1 Amp/28Vdc Inductive: 200 mA/28Vdc (320 mH) Lamp: 100 mA/28Vdc
-
Part No. H-7N -
Teledyne Relays
Latching, Space Grade, Transfer Switch, 50Ω impedanceDC-12GHz
-
Series DRS -
Teledyne Relays
Series DRS relays are designed for all types of loads. These relays feature our new high efficiency back-to-back thyristors for long lifetime expectancy. The relays utilize optical isolation to protect the control from load transients. These relays are Zero-Cross switching.Features Include:• AC Semiconductor Contactor with Diagnostic• Compact size and DIN rail mounting• Zero Cross switch ON in case of overvoltage• Large control range: 3-32Vdc• IP20 housing• UL conformity