Showing results: 16 - 30 of 223 items found.
-
Part No. LPBD100 -
Teledyne Relays
The LPBD100 is a dual-output 100 Vdc plastic relay. The relay output-switch contacts are normally closed and will conduct the load current until a voltage is applied to the relay input. With 4 volts or more at the relay input, the output-switch contacts open and the relay no longer conducts. The LPBD100 assembly contains two independent, completely isolated relays.MSL 6 Available options include:LPBD100 0.25Adc, 100Vdc Load; 4-7Vdc Control;
-
Part No. S134 -
Teledyne Relays
Centigrid hermetically sealed package, SMT-J mounted, non-latching DPDTAvailable options include:S134D - coil transient suppression diodeS134DD - coil transient suppression diode, and reverse polarity protection diodeResistive: 1 Amp/28Vdc Inductive: 200 mA/28Vdc (320 mH) Lamp: 100 mA/28Vdc
-
Part No.s CCR-33S/CR-33S -
Teledyne Relays
Latching/Failsafe, SPDT, 50Ω impedanceAvailable in Commercial and Elite models, with SMA connectors.DC-18GHz (commercial - CCR) DC-22GHz (Elite - CR)
-
Part No.s GRF100, GRF103 -
Teledyne Relays
Centigrid hermetically sealed package, SMT straight-lead mounted, non-latching DPDT, with high insertion loss repeatability Bandwidth: DC - 6GHzAvailable options include:GRF103 - low power coil
-
Teledyne Relays
High Performance Electromechanical Relays by Teledyne Relay
-
Part No. CCR-59S SP12T -
Teledyne Relays
Latching, SP12T Multi-Throw switch, 50Ω impedance. Available in Commercial and Elite models, with SMA connectorsDC-18GHz
-
Part No. ZD20CD -
Teledyne Relays
Series ZD20CD solid-state relays use an advanced design capable of switching heavy loads in a physically small 6-pin DIP package These relays have a power FET output that ensures low ON resistance and low leakage current. Optical isolation ensures complete protection of signal lines, power and ground bus and control circuits from switching noise and EMI.MSL 6ZD20CD 1A, 60Vdc Load; 8-20mAdc Control; through hole mountedSZD20CD 1A, 60Vdc Load; 8-20mAdc Control; surface mounted
-
Part No. CCP-38S -
Teledyne Relays
Normally Open, Low PIM, SP3T, SP4T, or SP6T, Multi-Throw switch, 50Ω impedance Available with SMA connectorsDC-3GHz
-
Teledyne Relays
Military Solid State Relays by Teledyne Relays - bi-directional/AC, DC/MSSRs, commercial, high performance relays, military cross reference tool, silicon carbide MSSR, and more.
-
Part No. InP1012-30 -
Teledyne Relays
Non-terminated SPDT Indium Phosphide Active RF Switch • 3mm x 3mm x 1mm package size • 100ns switching time• Monolithic solid-state switch with no mechanical wear• Flip-chip packaging provides shock & vibration resistance• ENEPIG surface finish for solder bonding• Low loss package with organic overmold• Test board with K-connectors can be providedDC-30GHz
-
Part No. InPD1012-40 -
Teledyne Relays
Non-terminated SPDT Indium Phosphide Active RF Switch • 3mm x 3mm x 1mm package size • 100ns switching time• Monolithic solid-state switch with no mechanical wear• Test board with K-connectors can be providedDC-40GHz40+ Gbps
-
Teledyne Relays
- Fully customized switching configurations (from 1x1024 to 24x42)- Universal Power Supply (96-240Vac)- Local Display – High Visibility LED- Standard 19" racks and custom chassis available - Local and/or remote control- 50 and 75 ohm impedances- Multiple interface configurations: - RF ports – SMA, 2.92mm, N, SMB, TNC, etc. - Control – RS-232, Ethernet, USB, Keypad, etc.- Monitor cycle count- Full Command API included- In-circuit programming (firmware upgradable) - Systems can be ruggedized and tested for challenging environments- Passive components Integration (Filters, Attenuators, Dividers, Combiners, etc.)
-
Part No. GA152 -
Teledyne Relays
Extended-Centigrid hermetically sealed package, SMT straight-lead mounted, Attenuator relayBandwidth: DC - 5GHz
-
-
Part No.s CCRT-33S/CRT-33S -
Teledyne Relays
Terminated Latching/Failsafe, SPDT, 50Ω impedanceAvailable in Commercial and Elite models, with SMA connectorsDC-18GHz (commercial) DC-22GHz (Elite)