Showing results: 1 - 15 of 223 items found.
-
Series E3P2G -
Teledyne Relays
The E3P2G series, three-phase solid state relay is the 2nd generation of the discontinued E3P series. The new design incorporates a high efficiency back-to-back thyristor with direct copper bonding for a longer lifetime expectancy. Over-Voltage protection is provided internally with TVS diodes for the input and output. Additionally our -16 model is designed with an RC snubber and VDR for greater protection to the output to handle all types of loads. The industrial SSR utilizes optical isolation to protect the control from load transients for each phase and has tight zero-cross window for low EMI. A control status LED are standard on all models.
-
Series DR2C & DR3C -
Teledyne Relays
The DR2C & DR3C series is intended to replace mechanical contactors especially for high duty cycle applications. Package width ranges from 54 mm (3xDIN) and goes up to 70 mm with 2-pole and 3-pole switching options available, provided with an integrated heatsink and designed for DIN rail mounting. Apart from resistive and slightly inductive loads, this series is certified for motor switching with associated motor ratings. A green LED status indicates a control voltage presence.
-
Series SHC -
Teledyne Relays
The SHC industrial, Single-Phase Relay with antiparallel thyristor output is the most widely used industrial SSR due to its multiple application possibilities. The relay can be used for resistive, inductive and capacitive loads offering both Zero-Cross and Random switching. The built-in varistor secures transient protection for the heavy industrial applications, and the LED indicates the status of the control input. The clip-on cover is securing touch protection to IP20 .
-
Teledyne Relays
The SHCDC is a DC output Industrial Solid-State Relay ideal for applications where fast switching response times are critical. It is well-suited for applications requiring a high number of switching cycles, as its lifetime is not affected by frequent switching. It can be mounted on a panel or heatsink and is controlled by a DC voltage ranging from 4 to 32 V and includes an LED status output to indicate the presence of control voltage on the SSR.
-
Series SHP -
Teledyne Relays
The Series SHP phase-angle controller provides analog switching. It features an internal microcontroller and overvoltage protection. Choose relays with either removable input spring connectors or IP20 touch-proof flaps. The relays are designed in conformity with EN60947-4-3 (IEC947-4-3)and EN60950/VDE0805 (Reinforced Insulation), and feature Phase Angle switching.Available options include:SHP24N50R 50A, 9-280Vac, 600Vpeak Load; 4-20mA Control
-
Series STHC -
Teledyne Relays
The STHC is a Single-Phase AC relay with antiparallel thyristor output stands as a cornerstone in industrial applications, accommodating resistive, inductive, and capacitive loads. Safety measures are paramount, and this relay integrates a built-in snubber for transient protection, LED indicator for the control input for users can monitor its status with ease, and IP20 clip-on cover for touch protection.
-
S20DC100 -
Teledyne Relays
Series S20 relays switch medium- to high-power DC loads. These devices feature the latest-generation MOSFET technology as well as an innovative isolated driver to ensure fast power turn on and off. The relays feature triggered control input to avoid linear control risks and fast switching times. The relays also offer an LED for status.
-
Series FSC -
Teledyne Relays
The FSC series provides a compact solid state switching solution suited for confined spaces and is suitable for resistive loads. Integrated transils provide protection against overvoltage and a green LED indicates presence of the control voltage. FASTON terminals for quick installation and with pre-attached thermal interface ready for mounting on chassis or heatsink.
-
Series DRSC -
Teledyne Relays
The DRSC is a ready-to-use Industrial Solid-State Relay that is provided with an integrated heatsink and designed for DIN rail mounting. The smallest footprint occupies only a width of 22.5 mm with ratings up to 30 A. The DRSC output is protected against overvoltage by means of an integrated varistor. Control ON indication is provided through a green LED.
-
412KH, 422KH -
Teledyne Relays
TO-5 package, through-hole mounted, DPDT high-shock and high-temperature relay.Available options include:412KH - high-shock and high temperature, non-latching422KH - high-shock and high temperature, magnetic-latching Resistive: 1 Amp/28Vdc Inductive: 200 mA/28Vdc (320 mH) Lamp: 100 mA/28Vdc
-
Part No. SGLB363 -
Teledyne Relays
Extended-TO-5 hermetically sealed package, SMTJ-lead mounted, double-DPDT loopback relayBandwidth: DC - 6GHz Signal Integrity: 16GbpsResistive: 1A /28Vdc
-
LP363 -
Teledyne Relays
Extended-TO-5 hermetically sealed package, through-hole mounted, double-DPDT loopback relayBandwidth: DC - 6GHz Signal Integrity: 16GbpsResistive: 1A /28Vdc
-
GRF172 -
Teledyne Relays
Centigrid hermetically sealed package, SMT straight-lead mounted, non-latching DPDT Bandwidth: DC - 2.5GHzAvailable options include:GRF172D - transient protection diode
-
GRF312 -
Teledyne Relays
TO-5 hermetically sealed package, SMT straight-lead mounted, non-latching, DPDT, with high insertion loss repeatabilityBandwidth: DC - 8GHzResistive: 1A /28Vdc
-
Part No.s CCT-39S/CT-39S SP3T/ SP4T/ SP6T -
Teledyne Relays
Latching, SP3T, SP4T, or SP6T Multi-Throw switch, 50Ω impedance. Includes internal 50Ω terminations on unused portsAvailable in Commercial and Elite models, with SMA connectorsDC-18GHz (commercial) DC-22GHz (Elite)