Microswitch, G12, Receiver, Right side

G12 Slide Mount

For maximum versatility and easy access to instrument-side wiring and cable assemblies, VPC offers a selection of slide kits designed to fit most common rack depths. All slides are rated to support 180 lbs (81 kg) to accommodate even the largest fixtures. To order, measure rack depth between mounting rails. With this measurement choose the slide mounting kit that fits the rack. A rack extender kit is available for mounting to racks with recessed rails.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

G12 Tabletop Mount

Virginia Panel Corporation

G12 receivers offer a tabletop mount with platforms available in 15" and 20" sizes. Each has four rubber feet below the platform that are removable allowing for permanent tabletop mounting.

Product Home Contact/Sales Distributors/Reps Manual Company Catalog Share Add To List

Receiver, G12, 12 Module, With 15" Platform, For Slide Mount (slide Kit Required)

310104325 - Virginia Panel Corporation

The 15” G12 Receiver is a slide-mounted receiver. The 15” platform will support 180 lbs. when used in a slide mount configuration. The Receiver is equipped with VPC’s Quadratrack™ engagement system which provides four points of pull down for a reliable connection every time up to 20,000 cycles. The handle can be rotated in 90 degree increments.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

Receiver, G12, 12 Module, 15" Platform, for Slide Mount

310104325-1 - Virginia Panel Corporation

Receiver, G12, 12 Module, 15" Platform, for Slide Mount (slide kit required)**Please note - This part number ships with the platform not attached to the receiver. Platform must be assembled after delivery. The 15" G12 Receiver is a slide-mounted receiver. The 15" platform provides a surface to hold fixtures or other tools and supports up to 180 lbs. The 15" platform configuration is not compatible with the optional leg kit.This part number includes: G12 Receiver 15" Platform Mounting brackets (for attaching slide kit to platform) Left side microswitchSlide kit, keying kit, instrument bracket, right side microswitch, and any other accessories must be purchased separately. Designed for VPC 90-Series modules.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Receiver, G12, 12 Module, With 20" Platform, For Slide Mount (slide Kit Required)

310104334 - Virginia Panel Corporation

The 20” G12 Receiver is a slide-mounted receiver. The 20” platform provides a large surface for use with large fixtures and supports 180lbs. When used in conjunction with VPC slide mounts and support legs, the Receiver can support 350 lbs. The Receiver is equipped with VPC’s Quadratrack™ engagement system which provides four points of pull down for a reliable connection every time up to 20,000 cycles. The handle can be rotated in 90 degree increments.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

Receiver, G12, 12 Module, 20" Platform, w/ Extended Handle, for Slide Mount

310104416 - Virginia Panel Corporation

Receiver, G12, 12 Module, 20" Platform, w/ Extended Handle, for Slide Mount (slide kit required)This G12 includes an extended handle to provide extra clearance for operation. This part number includes: G12 Receiver (w/ ext. handle) 20" Platform Left side Microswitch Mounting brackets (attach platform to slides)*Please note: Consult user manual for information regarding slight slide mechanism bracket protrusion downward into next U height on test rack on both sides of receiver.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

ITA, G12, Front Mount, 12 Module With Protective Cover

410104322 - Virginia Panel Corporation

The G12 ITA can be used with all G12 Receivers. The ITA can be used in a number of applications to accomplish the required connection to the Unit Under Test (UUT). You can mount a VPC Enclosure or customize your own fixture to be attached to the ITA. These are front mounted for ease of installation. A wide range of ITA modules are available separately for user configuration.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Protective Cover, G12, Receiver

310113402 - Virginia Panel Corporation

The Receiver Protective Cover prevents damage to your modules and contacts and keeps your test system in proper working order.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Replacement Protective Cover, G12, ITA, Vinyl

410112681 - Virginia Panel Corporation

The ITA Protective Cover protects your contacts and modules. An ITA Protective Cover is included with the G12 ITA.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Protective Cover, G12, ITA, Aluminum

410114010 - Virginia Panel Corporation

The G12 Aluminum ITA Protective Cover attaches securely to your ITA for easy and effective protection of contacts and modules. The cover snaps into place and enables smooth maneuverability of the ITA and enclosure over tables and other surfaces.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

20" Slide Kit, Fits 18"-22" Deep Racks

310113409 - Virginia Panel Corporation

Slide kits include a mounting bracket kit, slides and hardware. Choose your slide kit based onthe distance from rail to rail and verify that the slides will not interfere with the rack enclosure. Each kit will support 180 lbs.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

24" Slide Kit, Fits 22"-26" Deep Racks,Supports 180 Lbs.

310113410 - Virginia Panel Corporation

Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

30" Slide Kit, Fits 28"-32" Deep Racks, Supports 180 Lbs.

310113411 - Virginia Panel Corporation

Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

28" Slide Kit, Fits 26"-30" Deep Racks, Supports 180 Lbs.

310113451 - Virginia Panel Corporation

Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

36" Slide Kit, Fits 34"-38" Deep Racks, Supports 180 Lbs.

310113500 - Virginia Panel Corporation

Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

Adjustable Leg Kit For The 20" Platform, 27 - 36", Supports 350 Lbs.

310113566 - Virginia Panel Corporation

The legs are designed to alleviate added weight from your enclosure by giving the platform extra support. Each kit includes two legs which have a mounting block for attachment to the receiver platform. The legs are adjustable in height from 27 inches to 36 inches in 1 inch increments using the telescoping feature of the legs. The leveling guide can be adjusted to exact heights between the 1 inch increments.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Microswitch, G12, Receiver, Left side

310113210 - Virginia Panel Corporation

Microswitch, G12, Receiver, Left sidePlease note: Some G12 receivers already include a right or left side microswitch at the time of purchase, making purchasing this switch necessary only for replacement purposes. Check your G12 model number at purchase to verify.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Gap Cover, G12/G12x, Rack Mount

310113433 - Virginia Panel Corporation

Gap cover for use with rack mounting G12/G12x Receivers. The gap cover is not required if a rack extender kit is used.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Enclosure, G12, Front Mount, 4"x18"x12"

410112665 - Virginia Panel Corporation

The G12 ITA enclosure is made of aluminum and features a hinged cover plate with 1/4 turn hardware and provides easy access to the ITA wiring.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

Enclosure, G12, Front Mount, 9"x18"x12", for ITA p/n 410104322

410112699 - Virginia Panel Corporation

Enclosure, G12, Front Mount, 9"x18"x12", for ITA p/n 410104322Includes hinged coverHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Enclosure, G12, Front Mount, 4"x18"x12", For Discrete Wiring

410112739 - Virginia Panel Corporation

Enclosure, Part # 410 112 739 gives you the ability to discrete wire to your UUT with secure strain relief provided by the cable clamps located on the back end. Once the cable clamps are open, you can remove the stiffener bar and install or remove cables without unplugging patchcords from the assembly.

Product Home Contact/Sales Distributors/Reps Drawing Manual Company Catalog Share Add To List

Enclosure, G12, Front Mount, 7"x18"x12"

410112757 - Virginia Panel Corporation

Enclosure, G12, Front Mount, 7"x18"x12"

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Enclosure, G12, Front Mount, Sloped

410114002 - Virginia Panel Corporation

This 12-module enclosure is made of powder-coated aluminum. The top of the enclosure is a hinged cover plate with ¼-turn hardware that provides easy access to the ITA wiring.

Product Home Contact/Sales Distributors/Reps Drawing Company Catalog Share Add To List

Enclosure, G12, Front Mount, 4 Cable Clamps, 6"x 18" x 12"

410114014 - Virginia Panel Corporation

Enclosure, G12, Front Mount, 4 Cable Clamps, 6"x 18" x 12"Includes 4 cable clamps on the back end that eliminate the need for strain relief. When in open position- cable clamps permit removal of the stiffener bar so that installation or removal of cables may be performed without unplugging patchcords from the assembly. Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Microswitch, G12, Receiver, Right side

Topics