Optical Signal Conditioning Products
The single-mode fiber N7761A, N7762A and N7764A provide 1, 2 or 4 attenuation channels in a compact remote-controlled instrument. These attenuators provide very fast adjustment and have built-in output power monitoring for accurate power setting and control, as needed for receiver sensitivity testing or in system simulations.
- Photonic Test & Measurement
- Optical Component Test
- Optical Signal Conditioning Products
- 1x13 Optical Switch
- 1x4 Optical Switch Module
- Four-Channel Multimode Optical Attenuator
- Four-Channel Variable Optical Attenuator
- Integrated One Channel Variable Optical Attenuator with two Optical Power Meter Channels
- Integrated Two Channel Variable Optical Attenuator with two Optical Power Meter Channels
- One-Channel Variable Optical Attenuator
- Two-Channel 1x4 Optical Switch
- Two-Channel Multimode Optical Attenuator
- Two-Channel Variable Optical Attenuator
- Variable Optical Attenuator Module for Multimode Fiber Applications
- Variable Optical Attenuator Modules with Power Control and Angled Interface
- Variable Optical Attenuator Modules with Power Control and Straight Interface
- Variable Optical Attenuator Module with Angled Interface
- Variable Optical Attenuator Module with Straight Interface
- Lightwave Mainframes
- Optical Laser Source Products
- Optical Polarization and Dispersion Solutions
- Optical Power Measurement Products
- Polarization Controller
- Thermal Cycling Unit
- Wavelength Meters
- Optical Signal Conditioning Products
- Analog Modulation and Frequency-Dependent Measurements
- Coherent Transmission Test Instruments
- Optical Component Test
- 110 GHz Frequency Extender
- Accessories
- AC Power Analyzers
- AC Power Sources
- Application-Specific Test Systems & Components
- Arbitrary Waveform Generators
- AXIe Products
- Basic Spectrum Analyzers
- Bit Error Ratio Testers
- Cases & Covers
- Coaxial Terminations (Loads)
- CW Power Sensors
- Data Acquisition DAQ
- Data Acquisition / Data Logger Switch Unit
- DC Electronic Loads
- DC Power Solutions
- DC Power Supply
- DC Power Supply
- Design & Test Software
- Device Current Waveform Analyzers
- Digital Multimeters
- EasyEXPERT group+ Device Characterization Software
- Femto / Picoammeter and Electrometer / High Resistance Meter
- Femto / Picoammeter And Electrometer Meters
- Frequency Counter Products
- General Measurement Software
- Handheld Insulation Resistance Testers
- HEV / EV / Grid Emulators and Test Systems
- High-Speed Digitizers and Multichannel DAQ Solutions
- I3070 In-Circuit Test System Software
- In-circuit Test
- In-Circuit Test Systems
- Infiniium Oscilloscopes
- InfiniiVision Oscilloscopes
- Instrument Measurement Software
- Laser Interferometers & Calibration Systems
- LCR Meters And Impedance Measurement Products
- Logic Analyzers
- MMIC (Monolithic Microwave Integrated Circuit) Millimeter-Wave & Microwave Devices
- Modular Solar Array Simulators
- Monolithic Laser Combiners & Precision Optics
- Multifunction Switch / Measure Unit, Modules
- Nemo Wireless Network Solutions
- Network Analyzers
- Network Analyzer Software
- Network Test and Security
- Noise Figure Analyzers & Noise Sources
- Optical Power Meter Heads
- Oscilloscopes
- Parameter And Device Analyzers, Curve Tracers
- Parametric Test Solutions
- PathWave BenchVue Software
- PCI Express® 2.0 Protocol Test
- PCI EXPRESS® Protocol Solutions
- Phase Noise Measurement Solutions
- Power Meters & Power Sensors
- Propsim Channel Emulation Solutions
- Protocol Analyzer and Exerciser
- Pulse Generators
- PXI Avionics Databus Modules
- PXI Products
- PXI Software
- Reference Solutions
- Signal Generators (Signal Sources)
- Source / Measure Units
- Spectrum Analyzers (Signal Analyzers)
- Streamline Series Vector Network Analyzers
- Training Kits
- USB Modular Data Acquisition
- USB Products
- VXI Products
- Waveform/Function Generators
- Wireless Network Emulators
- X-Series Measurement Applications for EXM and EXF
-
product
1x13 Optical Switch
N7734A
The N7734A is a 1x13 fiberoptic switch, available for single-mode or multimode fiber connections. These enhance accurate measurements and ease automation with excellent repeatability, fast switching time and flexible interfacing with LAN, USB and GPIB.
-
product
1x4 Optical Switch Module
81595B
The plug-in module for Keysight's Lightwave Solution Platform 8163B, 8164B, 8166B is ideal for flexible system configuration in applications such as transceiver/receiver test with small foot-print or multiple passive component test with complex cascade.
-
product
Four-Channel Multimode Optical Attenuator
N7768A
Optical attenuator instruments are used to flexibly control optical signal power levels in test setups. A primary application is determining optical receiver sensitivity by measuring the BER vs. input signal power. The N7766A and N7768A provide 2 or 4 attenuator channels respectively for multimode fiber setups and are available with either 50 m, 62.5 m or 80 m fiber ports. The output power is monitored, especially to allow accurate and stable power setting independent of the input power. Convenient offset parameters allow the set power to correspond to the signal after other optical components in the setup path.
-
product
Four-Channel Variable Optical Attenuator
N7764A
The N7764A attenuator is an extension to Keysight's high density N77xx-family that establishes a new standard in space-saving fiberoptic instrumentation.
-
product
Integrated One Channel Variable Optical Attenuator with two Optical Power Meter Channels
N7751A
The Keysight N7751A combines an attenuator with 2 front-panel power meter channels, offering exceptional performance at a low price. The power meters permit measurements from any point in the measurements setup and assist in calibrating power offsets with respect to the attenuator output.
-
product
Integrated Two Channel Variable Optical Attenuator with two Optical Power Meter Channels
N7752A
The Keysight N7752A combines an attenuator with 2 front-panel power meter channels, offering exceptional performance at a low price. The power meters permit measurements from any point in the measurements setup and assist in calibrating power offsets with respect to the attenuator output.
-
product
One-Channel Variable Optical Attenuator
N7761A
The N7761A attenuator is an extension to Keysight's high density N77xx-family that establishes a new standard in space-saving fiberoptic instrumentation.
-
product
Two-Channel 1x4 Optical Switch
N7731A
The N7731A is a dual 1x4 fiberoptic switch, available for single-mode or multimode fiber connections. These enhance accurate measurements and ease automation with excellent repeatability, fast switching time and flexible interfacing with LAN, USB and GPIB.
-
product
Two-Channel Multimode Optical Attenuator
N7766A
Optical attenuator instruments are used to flexibly control optical signal power levels in test setups. A primary application is determining optical receiver sensitivity by measuring the BER vs. input signal power. The N7766A and N7768A provide 2 or 4 attenuator channels respectively for multimode fiber setups and are available with either 50 m, 62.5 m or 80 m fiber ports. The output power is monitored, especially to allow accurate and stable power setting independent of the input power. Convenient offset parameters allow the set power to correspond to the signal after other optical components in the setup path.
-
product
Two-Channel Variable Optical Attenuator
N7762A
The N7762A attenuator is an extension to Keysight's high density N77xx-family that establishes a new standard in space-saving fiberoptic instrumentation.
-
product
Variable Optical Attenuator Module for Multimode Fiber Applications
81578A
The Keysight 81578A variable optical attenuator is designed for multimode fiber applications and features lowest insertion loss and excellent wavelength flatness over a complete attenuation range of 60 dB, for characterizing optical network components for telecommunication and data communication in systems.
-
product
Variable Optical Attenuator Module with Angled Interface
81571A
The Keysight 81571A variable optical attenuator features lowest insertion loss and excellent wavelength flatness over a complete attenuation range of 60 dB, for characterizing optical network components for telecommunication and data communication in systems.
-
product
Variable Optical Attenuator Module with Straight Interface
81570A
The Keysight 81570A variable optical attenuator features lowest insertion loss and excellent wavelength flatness over a complete attenuation range of 60 dB, for characterizing optical network components for telecommunication and data communication in systems.
-
product
Variable Optical Attenuator Modules with Power Control and Angled Interface
81577A
The Keysight 81577A variable optical attenuator features lowest insertion loss and excellent wavelength flatness over a complete attenuation range of 60 dB, for characterizing optical network components for telecommunication and data communication in systems. Keysight's 81577A attenuator features power control functionality that allows you to set the output power level of the attenuator.
-
product
Variable Optical Attenuator Modules with Power Control and Straight Interface
81576A
The Keysight 81576A variable optical attenuator features lowest insertion loss and excellent wavelength flatness over a complete attenuation range of 60 dB, for characterizing optical network components for telecomunication and data communication in systems. Keysight's 81576A attenuator features power control functionality that allows you to set the output power level of the attenuator.
