Digital Thermometers
Digital Thermometers by Tegam
Topics
-
product
100 Ohm Platinum RTD Thermometer
869
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use.
-
product
Air / Gas Temperature Probe
8716
For measuring atmospheres in hoods, ducts, and vents. A perforated-style shield protects the thermocouple tip from radiated temperature change in order to provide more accurate readings. The 8-1/2" sheath is constructed of 304 stainless steel. The probe is supplied with a 3-ft straight cord.
-
product
Dual Input Handheld Digital Thermometer
820A
Model 820A dual input, digital, thermometers are compatible with type K or J thermocouple probes to provide temperature measurements from -346F to 2502F. The heavy-duty case is designed for durability and resistance to external contaminants such as dust and chemicals. The case has a built-in tilt bail for hands-free or bench top operation.
-
product
Dual Input Handheld Digital Thermometer
821A
This dual input thermometer is functionally the same as the Model 820A except that type T thermocouple compatibility is added to expand the meters compatibility to the most common thermocouple types. Option #8204, protective rubber boot & belt clip, and other accessories compatible with Models 819 and 820, are also available for this device.
-
product
Economical Thermocouple Thermometer °C (Type K)
874C
Tegam''s 874F and 874C Budget Series thermometers provide the economical solution for general-purpose temperature measurement needs. The units accept type K thermocouples and probes. Constructed with ABS material for resistance to inorganic salts, alkalies, and many acids and exceptional durability, this meter is designed for the toolbox and for use in the field.
-
product
Temperature Probe, Thermistor, General Purpose/Immersion
8663
Designed for immersion into liquids or gases, the 8663 probe is constructed with a 3-3/4", round tipped, 316 stainless sheath, and a 2" handle connected to a thermoplastic rubber coil type cord. The cord extends from 1-1/2 feet to 3 feet.
-
product
Temperature Probe, 100 ohm, RTD, General Purpose/Immersion
8693
100, platinum RTD probe used for general purpose measurement of temperature of gases, liquids, soft materials, or small area surfaces.
-
product
Temperature Probe, Type K, Wire, 3′
8712
For fast response temperature measurements of gases, surfaces, or liquids. These 3-ft long, Type-K probes, (8712) are constructed with fiber-glass insulated, 24-ga wires welded at the tips. Model 8712-6 are 6-ft in length.
-
product
Temperature Probe, Type K, Wire, 6′
8712-6
For fast response temperature measurements of gases, surfaces, or liquids. These 3-ft long, Type-K probes, (8712) are constructed with fiber-glass insulated, 24-ga wires welded at the tips. Model 8712-6 are 6-ft in length.
-
product
Thermocouple Thermometer, Dual Input / Analog Output
871A
Industry''s leading handheld thermometers that feature analog outputs for use with chart recorders or computer I/O cards, the 870 series has dual thermocouple inputs and respective linear analog outputs which produce 1mV/C or 5/9 mV/F in the 200 ranges and .1mV/C or 5/90 mV/F in the other ranges. The Model 871A uses Type K thermocouples to measure a temperature range from -40 to 1999F (-40 to 1370C) and the Model 872A uses type J thermocouples to measure from -40 to 1400F (-40 to 760C).
-
product
RH / Temperature Controller and Probe
CSP-F1
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
product
Thermocouple Thermometer, Single Input °C &°F (K, J , T & E)
911A
The Model 911A is a single channel digital thermometer compatible with type K, J, T or E thermocouple probes to provide a wide range of temperature measurements, (-418 °F to 2502 °F) and boasts a 2000 hour battery life using three AA batteries. The 911A provides dependable and uninterrupted portable measurement capability without expensive batteries, AC adapters or chargers.
-
product
Temperature Probe, Type K, Penetration
8734
For measuring semi-soft materials within a restricted temperature range. Compact size makes this probe easy to transport. The 403 stainless steel sheath has a pointed tip and is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet.
-
product
Temperature Calibrator/Thermometer
855
The ideal solution for anyone that needs a hand held, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. The 855 meter will simulate, source, measure and record the same thermocouple types as the 850, K-J-T-E, and adds N-B-R-S-G-C-D types. The meter also supports 1000, 100k, 100 RTD''s but does not support thermistor''s.
-
product
Temperature Probe, Type K, Immersion
8733
Multi-purpose probe for measuring air, liquids, soft materials, (e.g., water, ice cream, etc.). Compact size makes this probe easy to transport. The 403 stainless steel sheath is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet. Model 8733 is a Type K probe and Model 8753 is a Type T.
-
product
Temperature Probe, Type K, Penetration w/ Coiled Cable
8714A
Type-K thermocouple probe. Ideal for temperature measurement of meats, plastics, and other semi-soft materials. The sheath is 3" long and 1/8" in diameter and is constructed with #304 stainless steel. The coil-type cord is constructed with a thermoplastic rubber jacket and is 1-1/2 feet in length and reaches up to 5 feet when fully extended.
-
product
RH / Temperature Controller and Probe
CSP-C2
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
product
RH / Temperature Controller and Probe
CSP-C1
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
product
RTD / Thermistor Thermometer
866
Tegam's Model 865 & 866 digital, thermistor thermometers measure temperatures from -70°F to 300°F, (-55°C to 150°C). Compatible with all YSI Series 400 probes, temperature measurement is performed with a basic accuracy of .3%. These thermometers are specially constructed with a heavy duty ABS case specifically designed for durability and resistance to contaminants such as dust and most chemicals.
-
product
RTD / Thermistor Thermometer
865
Tegam''s Model 865 & 866 digital, thermistor thermometers measure temperatures from -70F to 300F, (-55C to 150C). Compatible with all YSI Series 400 probes, temperature measurement is performed with a basic accuracy of .3%. These thermometers are specially constructed with a heavy duty ABS case specifically designed for durability and resistance to contaminants such as dust and most chemicals.
-
product
Temperature Probe, 100 ohm, RTD, Air/Gas
8696
Model 8696, platinum RTD probe is designed for measuring air and other gaseous mediums. The sheath is 8" long and is constructed with #304 stainless steel. The probe tip is protected from temperature fluctuations by a perforated shield. The probe''s 4-inch handle is connected to a thermoplastic coil cord that extends from 1-1/2 feet to 5 feet.
-
product
Platinum RTD Thermometer
868
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use. Model 868 reads in F and Model 869 reads in C.
-
product
Temperature Probe, Type K, Surface
8715A
Type-K thermocouple probe. For monitoring hotplates, furnaces, molds, and other solid surfaces. The exposed thermocouple junction provides an accurate reading of surface temperature within 3 seconds. The sheath is 6" long with a 1/4" diameter flat tip. It is constructed with #304 stainless steel. The vinyl clad straight cord is 3-feet in length
-
product
Temperature Probe, Thermistor, Surface
8665A
For fast temperature measurements on flat surfaces such as grills or ovens. Designed with a 3-3/4", 304 stainless steel sheath terminating into a 1/4" flat beveled tip for easy tip placement onto the surface being monitored. The flexible thermoplastic rubber cord extends from 1-1/2 feet to 3 feet.
-
product
Temperature Calibrator/Thermometer, °C & °F (Multi T/Cs)
845
Functionally the same as the Model 840A, the 845 adds several thermocouple types for greater flexibility in calibrating K-J-T-E-N-B-R-S-G-C and D-type thermocouple thermometers in the lab or out in the field. This device is a handy verification tool for QA inspectors and manufacturing engineers.
-
product
Temperature Calibrator / Thermometer with RTD and Thermistor
850
The ideal solution for anyone that needs a handheld, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. These meters will simulate, source, measure and record K-J-T-E thermocouples, 1000, 100k, 100 RTD''s and thermistors.
-
product
Temperature Probe, Thermistor, Air/Gas
8666
The specially designed, shielded tip of this probes makes it ideal for monitoring moving air or gas temperatures. The exposed sensing element, located on the tip of a 3-3/4" long, 1/4" diameter, sheath, is protected by a perforated shield to minimize fluctuating readings caused by radiation or isolated gas pockets. The cord is an extendable / retractable coil-type which is 1-1/2 feet long and can extend up to 3 feet maximum.
-
product
Calibrator/Thermometer °C&°F (K, J & T)
840A
Used by calibration technicians or manufacturing engineers to perform field calibrations on K-J-T thermocouple thermometers. The single input/output meter doubles as a K-J-T thermometer.
-
product
Temperature Probe, Type J, Immersion
8723
For fast response measurement of liquids, gases, or small area surfaces. Sheaths are 5" in length and are constructed with 304 stainless steel. The thermal junction is physically located at the tip of the probe. 3-ft vinyl-clad straight cord. Model 8713 is a Type-K thermocouple probe and Model 8723 is a Type-J thermocouple probe.
-
product
Thermocouple Thermometer, Single Input, °C &°F (K, J & T) w/ Type K Wire Sensor
819A
The Model 819A digital thermometer is compatible with type K, J, or T thermocouple probes to provide a wide range of temperature measurements, (-346F to 2502F). The heavy-duty case is specifically designed for durability and resistance to contaminants such as dust and chemicals. It also features a tilt bail for hands-free or bench top operation. An optional protective rubber boot & belt clip, PN#8204, is available to protect the meter against drops and other physical stresses.
-
product
Temperature Probe, Type, K, Immersion
8713
For fast response measurement of liquids, gases, or small area surfaces. Sheaths are 5" in length and are constructed with 304 stainless steel. The thermal junction is physically located at the tip of the probe. 3-ft vinyl-clad straight cord. Model 8713 is a Type-K thermocouple probe and Model 8723 is a Type-J thermocouple probe.
-
product
Temperature Probe, 100 ohm, RTD, Surface
8695A
100 platinum, surface probe is designed specifically for temperature measurements on hot or cold flat surfaces such as industrial furnaces or restaurant grills.
-
product
100 Ohm Platinum RTD Thermometer
869
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use.
-
product
Air / Gas Temperature Probe
8716
For measuring atmospheres in hoods, ducts, and vents. A perforated-style shield protects the thermocouple tip from radiated temperature change in order to provide more accurate readings. The 8-1/2" sheath is constructed of 304 stainless steel. The probe is supplied with a 3-ft straight cord.
-
product
Dual Input Handheld Digital Thermometer
820A
Model 820A dual input, digital, thermometers are compatible with type K or J thermocouple probes to provide temperature measurements from -346F to 2502F. The heavy-duty case is designed for durability and resistance to external contaminants such as dust and chemicals. The case has a built-in tilt bail for hands-free or bench top operation.
-
product
Dual Input Handheld Digital Thermometer
821A
This dual input thermometer is functionally the same as the Model 820A except that type T thermocouple compatibility is added to expand the meters compatibility to the most common thermocouple types. Option #8204, protective rubber boot & belt clip, and other accessories compatible with Models 819 and 820, are also available for this device.
-
product
Economical Thermocouple Thermometer °C (Type K)
874C
Tegam''s 874F and 874C Budget Series thermometers provide the economical solution for general-purpose temperature measurement needs. The units accept type K thermocouples and probes. Constructed with ABS material for resistance to inorganic salts, alkalies, and many acids and exceptional durability, this meter is designed for the toolbox and for use in the field.
-
product
Temperature Probe, Thermistor, General Purpose/Immersion
8663
Designed for immersion into liquids or gases, the 8663 probe is constructed with a 3-3/4", round tipped, 316 stainless sheath, and a 2" handle connected to a thermoplastic rubber coil type cord. The cord extends from 1-1/2 feet to 3 feet.
-
product
Temperature Probe, 100 ohm, RTD, General Purpose/Immersion
8693
100, platinum RTD probe used for general purpose measurement of temperature of gases, liquids, soft materials, or small area surfaces.
-
product
Temperature Probe, Type K, Wire, 3′
8712
For fast response temperature measurements of gases, surfaces, or liquids. These 3-ft long, Type-K probes, (8712) are constructed with fiber-glass insulated, 24-ga wires welded at the tips. Model 8712-6 are 6-ft in length.
-
product
Temperature Probe, Type K, Wire, 6′
8712-6
For fast response temperature measurements of gases, surfaces, or liquids. These 3-ft long, Type-K probes, (8712) are constructed with fiber-glass insulated, 24-ga wires welded at the tips. Model 8712-6 are 6-ft in length.
-
product
Thermocouple Thermometer, Dual Input / Analog Output
871A
Industry''s leading handheld thermometers that feature analog outputs for use with chart recorders or computer I/O cards, the 870 series has dual thermocouple inputs and respective linear analog outputs which produce 1mV/C or 5/9 mV/F in the 200 ranges and .1mV/C or 5/90 mV/F in the other ranges. The Model 871A uses Type K thermocouples to measure a temperature range from -40 to 1999F (-40 to 1370C) and the Model 872A uses type J thermocouples to measure from -40 to 1400F (-40 to 760C).
-
product
RH / Temperature Controller and Probe
CSP-C1
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
product
Thermocouple Thermometer, Single Input °C &°F (K, J , T & E)
911A
The Model 911A is a single channel digital thermometer compatible with type K, J, T or E thermocouple probes to provide a wide range of temperature measurements, (-418 °F to 2502 °F) and boasts a 2000 hour battery life using three AA batteries. The 911A provides dependable and uninterrupted portable measurement capability without expensive batteries, AC adapters or chargers.
-
product
Temperature Probe, Type K, Penetration
8734
For measuring semi-soft materials within a restricted temperature range. Compact size makes this probe easy to transport. The 403 stainless steel sheath has a pointed tip and is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet.
-
product
Temperature Calibrator/Thermometer
855
The ideal solution for anyone that needs a hand held, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. The 855 meter will simulate, source, measure and record the same thermocouple types as the 850, K-J-T-E, and adds N-B-R-S-G-C-D types. The meter also supports 1000, 100k, 100 RTD''s but does not support thermistor''s.
-
product
Temperature Probe, Type K, Immersion
8733
Multi-purpose probe for measuring air, liquids, soft materials, (e.g., water, ice cream, etc.). Compact size makes this probe easy to transport. The 403 stainless steel sheath is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet. Model 8733 is a Type K probe and Model 8753 is a Type T.
-
product
Temperature Probe, Type K, Penetration w/ Coiled Cable
8714A
Type-K thermocouple probe. Ideal for temperature measurement of meats, plastics, and other semi-soft materials. The sheath is 3" long and 1/8" in diameter and is constructed with #304 stainless steel. The coil-type cord is constructed with a thermoplastic rubber jacket and is 1-1/2 feet in length and reaches up to 5 feet when fully extended.
-
product
RH / Temperature Controller and Probe
CSP-C2
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
product
RTD / Thermistor Thermometer
866
Tegam's Model 865 & 866 digital, thermistor thermometers measure temperatures from -70°F to 300°F, (-55°C to 150°C). Compatible with all YSI Series 400 probes, temperature measurement is performed with a basic accuracy of .3%. These thermometers are specially constructed with a heavy duty ABS case specifically designed for durability and resistance to contaminants such as dust and most chemicals.
-
product
RTD / Thermistor Thermometer
865
Tegam''s Model 865 & 866 digital, thermistor thermometers measure temperatures from -70F to 300F, (-55C to 150C). Compatible with all YSI Series 400 probes, temperature measurement is performed with a basic accuracy of .3%. These thermometers are specially constructed with a heavy duty ABS case specifically designed for durability and resistance to contaminants such as dust and most chemicals.
-
product
Temperature Probe, 100 ohm, RTD, Air/Gas
8696
Model 8696, platinum RTD probe is designed for measuring air and other gaseous mediums. The sheath is 8" long and is constructed with #304 stainless steel. The probe tip is protected from temperature fluctuations by a perforated shield. The probe''s 4-inch handle is connected to a thermoplastic coil cord that extends from 1-1/2 feet to 5 feet.
-
product
Platinum RTD Thermometer
868
Models 868 and 869 digital RTD thermometers measure temperatures from -360F to 1100F, (-220C to 630C). Compatible with either 3 or 4 wire RTDs, temperature measurement is performed with a best accuracy of .4F(.3C). These thermometers are specially constructed with a heavy duty ABS case specifically designed for industrial use. Model 868 reads in F and Model 869 reads in C.
-
product
Temperature Probe, Type K, Surface
8715A
Type-K thermocouple probe. For monitoring hotplates, furnaces, molds, and other solid surfaces. The exposed thermocouple junction provides an accurate reading of surface temperature within 3 seconds. The sheath is 6" long with a 1/4" diameter flat tip. It is constructed with #304 stainless steel. The vinyl clad straight cord is 3-feet in length
-
product
Temperature Probe, Thermistor, Surface
8665A
For fast temperature measurements on flat surfaces such as grills or ovens. Designed with a 3-3/4", 304 stainless steel sheath terminating into a 1/4" flat beveled tip for easy tip placement onto the surface being monitored. The flexible thermoplastic rubber cord extends from 1-1/2 feet to 3 feet.
-
product
Temperature Calibrator/Thermometer, °C & °F (Multi T/Cs)
845
Functionally the same as the Model 840A, the 845 adds several thermocouple types for greater flexibility in calibrating K-J-T-E-N-B-R-S-G-C and D-type thermocouple thermometers in the lab or out in the field. This device is a handy verification tool for QA inspectors and manufacturing engineers.
-
product
Temperature Calibrator / Thermometer with RTD and Thermistor
850
The ideal solution for anyone that needs a handheld, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. These meters will simulate, source, measure and record K-J-T-E thermocouples, 1000, 100k, 100 RTD''s and thermistors.
