Coupling Decoupling Network for Communication Lines

CDN61000-5C - Lisun Electronics Inc. (Lisun Group)

• Application Range: ≤4kV, 1.2/50us pulse, 8 wire unshielded twisted pair (UTP) • Test Voltage: Max 4KV, 2 kV (1.2/50 µs pulse when RJ45 connector is connected. Maximum test voltage is 1.5kV when RJ45 female is unconnected or auxiliary terminal is not protected.) • Coupling mode: 90V gas- discharge tube+250ohm Resistor/Each Wire, 8 Wires Simultaneously-Ground (Common Mode) • Input and output interface: RJ45 connector • Terminal layout (RJ45 connector): First pair of lines: pins 1/2 Second pair of lines: pins3/6 Third pair of lines: pins 4/5 Fourth pair of lines: pins 7/8 • Max. operating speed: 1000MBit/s • Max operating voltage: Max 50V DC • Max operating current: Max 1A Related Instruments

Product Home Contact/Sales Company Catalog Share Add To List

Family

EMI and EMC Test System

Lisun Electronics Inc.

EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem.

Product Home Contact/Sales Company Catalog Share Add To List
EMI Receiver System

EMI-9KC/EMI-9KB - Lisun Electronics Inc.

EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KB fully meets CISPRl6-1, GB17743, FCC, EN55015 and EN55022.

Product Home Contact/Sales Company Catalog Share Add To List
Multifunctional Immunity Test System For Automotive Electronics

EMS-ISO7637 - Lisun Electronics Inc.

EMS-ISO7637 automotive multifunctional immunity test system meet newest ISO7637-2 requirement of. This standard was issued by international organization for standardization, and this system included all of ISO-7637 required test waveform and meet most of automotive manufacturer’s requirement for automotive electronic immunity test.

Product Home Contact/Sales Video Company Catalog Share Add To List
Electrostatic Discharge Simulator

ESD61000-2 - Lisun Electronics Inc.

ESD simulator (Electrostatic Discharge Generator or Electrostatic Gun) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. The ESD generator is designed for the assessment of electrical and electronic equipment to withstand ESD performance. ESD61000-2/ESD61000-2A has LCD display in both English and Chinese, they equipped with an infrared remote control which can allow you do the test in some special place.

Product Home Contact/Sales Video Company Catalog Share Add To List
EMI Test System

EMI-9KA - Lisun Electronics Inc.

EMI-9KA is an automatic EMI receiver. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KA is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KA fully meets CISPRl6-1, GB17743, FCC, EN55015 and EN55022.

Product Home Contact/Sales Company Catalog Share Add To List
Magnetic Shielding Cabinet for EMI Testing

SDR-2000B - Lisun Electronics Inc.

Cabinet Shell 2mm galvanized cold-rolled steel sheetCabinet Door 0.9*1.7m(L*W) 0.6*0.6mCabinet Window 0.3*0.3*0.025m(L*W*T) with 4mm hole N/APower Supply Filter 30A/220V 30A/220VInternet Line Filter RJ-45 N/ACabinet Inside Decoration PVC ceiling, PVC plastic steel wall, 10mm wooden + 2mm galvanized steel sheet floorCabinet Inside Size 2*1.2*1.8m 0.8*0.8*0.8mAfter Packing Size 2.2*2.3*2.3m 1*1.1*1.2mAfter Packing Weight 800kg 200kgWorking With EMI-9KA/EMI-9KB EMI-9KA/EMI-9KB, PC, Testing load, and operator inside Testing load is inside to connect with EMI-9KA/EMI-9KB via BNC

Product Home Contact/Sales Company Catalog Share Add To List
RF Conducted Immunity Test System

RFCI61000-4-6 - Lisun Electronics Inc.

RFCI61000-4-6 RF Conducted Immunity Test System is an automatic test system which is for the conduction sensitivity testing, it is fully meets IEC61000-4-6.2006, ISO11452-4, GB/T17626.6-2008 and GTB152B-CS114 etc standards. RFCI61000-4-6 internal source and broadband power amplifier can be generated 3 voltage test levels: 1v, 3v and 10v, and has the function of the real detect output level. It has two operation software which is calibration software and test software. When measuring, the signal is in 1 KHZ sine wave amplitude modulation system (80%) to simulate the actual harassment, and can through the coupling/decoupling network (CDN or electromagnetic clamp) to make the harassment signal coupled to the device.

Product Home Contact/Sales Company Catalog Share Add To List
EFT Immunity Measurement

EFT61000-4 - Lisun Electronics Inc.

EFT immunity tester EFT61000-4 is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement. They have fine performance, such as high stability, high reliability, easy to use etc. It meets the standard requirements of IEC 61000-4-4, EN 61000-4-4, GB/T17215.301, GB/T17215.322 and GB/T17626.4. EFT61000-4 has LCD display in both English and Chinese.

Product Home Contact/Sales Video Company Catalog Share Add To List
Surge Generator

SG61000-5 - Lisun Electronics Inc.

Automatic lightning surge generator (or Lightning surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the IEC 61000-4-5, EN61000-4-5 and GB/T17626.5 standards.

Product Home Contact/Sales Video Company Catalog Share Add To List
Impulse Withstand Voltage Tester

SUG255 - Lisun Electronics Inc.

The Impulse Withstand Voltage Tester (or High Voltage Surge Generator), it is according to IEC255-5, IEC60060, IEC60065, GB14711, GBT17215.301 and GBT17215.322. It is suitable for doing all kinds of electrical and electronic products (such as energy meter, household appliances, low voltage electrical appliances and small power motor) insulation performance test.

Product Home Contact/Sales Video Company Catalog Share Add To List
Transient Over-voltages Tester

SUG335 - Lisun Electronics Inc.

The SUG335 is a 1.2/50μs Transient Over-voltages Tester. The polarity interval time can be at least 1s. The standard voltage waveform complies with the IEC 60335, IEC61180, IEC 62052-11: 2003, IEC 61008-1: 1996, IEC 61009-1:1996 and IEC 60947-1: 1995, IEC60060, IEC1036 surge voltage test and has been used for safety testing to determine if the clearance was fulfilled the safety requirement while the transient voltage in the circuit.

Product Home Contact/Sales Company Catalog Share Add To List
Impulse Test Generator

SUG-CCITT-A - Lisun Electronics Inc.

Impulse Test Generator SUG-CCITT-A (1a. 10/700us, 6KV, figure is according to N.1 in IEC60950-1:2005 Annex N). N.1 ITU-T impulse test generators.

Product Home Contact/Sales Company Catalog Share Add To List
Magnetic Field Generator

PFM61000-8A - Lisun Electronics Inc.

PFM61000-8A Magnetic Field Generator is high reliability test equipment with stable performance, specially designed for electrical and electronic products for measuring immunity characteristics and requirements of normal frequency magnetic fields. It provides an accurate basis for the tested equipment in the immunity test of normal frequency magnetic field. The generator can imitate the magnetic field environments such as residential, commercial, industrial and mining enterprises, power plants, as well as middle and high substation. It fully meets IEC61000-4-8 and GB / T17626.8 standards.

Product Home Contact/Sales Company Catalog Share Add To List
Impulse Magnetic Field Immunity Tester

IMF61000-9 - Lisun Electronics Inc.

IMF61000-9 impulse magnetic field immunity tester is high performance test instrument which special designed for to do impulse magnetic field immunity test and fully meet IEC61000-4-9, EN61000-4-9 and GB/T17626.9 standards, also it come with high intelligent, high stable performance and easy operation characteristics.

Product Home Contact/Sales Company Catalog Share Add To List
Damped Oscillatory Magnetic Field Immunity Tester

DOMF61000-10 - Lisun Electronics Inc.

DOMF61000-10 damped oscillatory magnetic field immunity test system included damped oscillating wave generator and single ring coil, it’s designed for to do damping oscillation magnetic field immunity test and fully meet IEC 61000-4-10, EN61000-4-10 and GB/T 17626.10 standards requirement.

Product Home Contact/Sales Company Catalog Share Add To List
Voltage Dips and Interruptions Generator

CSS61000-11 - Lisun Electronics Inc.

The voltage dip and interruptions generator is specially designed according to the characteristics and requirements of EMS measurement under a sudden reduction or interruption of the voltage at a point, CSS61000-11/ CSS61000-11T used a big LCD in both English and Chinese operating interface. They have more fine performance such as high reliability, convenient operation, and full meet the standard requirements of IEC 61000-4-11, EN 61000-4-11 and GB/T17626.11

Product Home Contact/Sales Video Company Catalog Share Add To List
Pulse Start Generator for High Pressure Sodium Lamp

LPSG60662 - Lisun Electronics Inc.

The start-up test of the special lights pulse start generator is for lighting class industry such as high pressure sodium, it is according to IEC60662: 2011 and GB/T13259-2005 standard requirements.

Product Home Contact/Sales Company Catalog Share Add To List
Three Loop Antenna

VVLA-30M - Lisun Electronics Inc.

The three loop antenna VVLA-30M is a standard measurement antenna according to CISPR15-2005/GB17743-2007 standard , it can work with LISUN EMI-9KA / EMI- 9KB EMI Receiver System for EUT magnetic field radiation measurement between X, Y and Z planes. The antenna measurement is accurate, switch conveniently and it can completely replace imported products.

Product Home Contact/Sales Company Catalog Share Add To List
Absorbing Clamp

AB-CLP - Lisun Electronics Inc.

• EMI Receiver equipped with absorbing clamp can indirectly test radiated interference power of household electrical appliance, power tool and similar electrical appliance with frequency from 30~300MHz.

Product Home Contact/Sales Company Catalog Share Add To List
Voltage Probe

VOL-PBE - Lisun Electronics Inc.

• EMI Receiver equipped with voltage probe can test disturbance voltage from load terminals or control terminals

Product Home Contact/Sales Company Catalog Share Add To List

Coupling Decoupling Network for Communication Lines

Topics