G12x Tabletop
Virginia Panel Corporation (VPC)
The G12x Receiver has four removable rubber feet below the platform and also allows for permanent tabletop mounting. Available with 15" or 20" platforms. The G12x accepts ITAs designed for both the G12 and G12x allowing versatility with your test system.
- G12x - 18 Module Solution
- G12x Tabletop
- G12x Slide Mount
- Enclosure, G12x, Front Mount, 6"x18"x12"
- Enclosure, G12x, Front Mount, Sloped
- ITA, G12x, Front Mount, 18 Module
-
product
Receiver, G12x, 18 Module, with 20" Platform for Tabletop, w/ Left Handle
310104151
Receiver, G12x, 18 Module, with 20" Platform for Tabletop, w/ Left Handle Engagement handle located on left side versus standard right hand side Designed for tabletop Includes a 20” platform Equipped with VPC’s Quadratrack™ engagement system 20,000 cycles Handle can be rotated in 90 degree increments Can accept G12x ITA or G12 ITA
-
product
Receiver, G12x, 18 Module, With 15" Platform For Tabletop
310104410
Receiver, G12x, 18 Module, with 15" Platform for Tabletop
-
product
Protective Cover, G12x, Receiver
310113518
The Receiver Protective Cover prevents damage to your modules and contacts and keeps your test system in proper working order.
-
product
Protective Cover, G12x, ITA, Aluminum
410112857
The G12x Aluminum ITA Protective Cover attaches securely to your ITA for easy and effective protection of contacts and modules. The cover snaps into place and enables smooth maneuverability of the ITA and enclosure over tables and other surfaces.
-
product
ITA, G12, Front Mount, 12 Module With Protective Cover
410104322
The G12 ITA can be used with all G12 Receivers. The ITA can be used in a number of applications to accomplish the required connection to the Unit Under Test (UUT). You can mount a VPC Enclosure or customize your own fixture to be attached to the ITA. These are front mounted for ease of installation. A wide range of ITA modules are available separately for user configuration.
-
product
ITA, G12x, Front Mount, 18 Module
410104474
The G12x ITA can be used with all G12x Receivers. The ITA can be used in a number of applications to accomplish the required connection to the Unit Under Test (UUT). You can mount a VPC Enclosure or customize your own fixture to be attached to the ITA. These are front mounted for ease of installation. A wide range of ITA modules are available separately for user configuration.
-
product
Enclosure, G12, Front Mount, 4"x18"x12"
410112665
The G12 ITA enclosure is made of aluminum and features a hinged cover plate with 1/4 turn hardware and provides easy access to the ITA wiring.
-
product
Enclosure, G12, Front Mount, 4"x18"x12", For Discrete Wiring
410112739
Enclosure, Part # 410 112 739 gives you the ability to discrete wire to your UUT with secure strain relief provided by the cable clamps located on the back end. Once the cable clamps are open, you can remove the stiffener bar and install or remove cables without unplugging patchcords from the assembly.
-
-
product
Enclosure, G12x, Front Mount, 6"x18"x12"
410112849
The G12x ITA enclosure is made of aluminum and features a hinged cover plate with 1/4 turn hardware and provides easy access to the ITA wiring.
-
product
Enclosure, G12x, Front Mount, 6"x18"x12", For Discrete Wiring
410112856
This enclosure gives you the ability to discrete wire to your UUT with secure strain relief provided by the cable clamps located on the back end. Once the cable clamps are open, you can remove the stiffener bar and install or remove cables without unplugging patchcords from the assembly.
-
-
product
Keying Pin Kit, Receiver/ITA
310118112
The Keying Pin kit is a way to avoid damaging the contacts within the ITAs and Receivers. Simply insert the longer keying pins into the receiver and the smaller set screws into the ITA to create the pattern needed to isolate your test fixtures so there is no operational mismatch.
-
product
Protective Cover, G12x, Receiver
310113518
The Receiver Protective Cover prevents damage to your modules and contacts and keeps your test system in proper working order.
-
product
Protective Cover, G12x, ITA, Aluminum
410112857
The G12x Aluminum ITA Protective Cover attaches securely to your ITA for easy and effective protection of contacts and modules. The cover snaps into place and enables smooth maneuverability of the ITA and enclosure over tables and other surfaces.
-
product
Rear Cover, G12x, Tabletop Configuration
310113520
The Rear Cover is designed to connect to the receiver in a tabletop configuration and act as a mean to hide the cables that are running back to the testing equipment. This works well with applications where the cables are running down to a lower level below the receiver.
-
product
Receiver, G12x, 18 Module, With 15" Platform For Tabletop
310104410
Receiver, G12x, 18 Module, with 15" Platform for Tabletop
-
product
Protective Cover, G12, Receiver
310113402
The Receiver Protective Cover prevents damage to your modules and contacts and keeps your test system in proper working order.
-
product
Enclosure, G12X, Front Mount, 14.75" Depth
410112122
Includes a hinged top cover. Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
