Showing results: 406 - 420 of 1213 items found.
-
CHROMA-2 -
Lisun Electronics Inc.
CHROMA-2 Pocket Chroma Meter is developed based on TOSHIBA TCD1304DG linear array CCD detector. It makes traditional laboratory instrument available for the production on-line quality acceptance, thus greatly improved the efficiency of fluorescent lamp, CFL, LED.
-
BT55U -
Schumacher Electric Corporation
BATTERY/ALTERNATOR TESTERFOR TESTING:• Battery state of charge• Charging system outputFEATURES:• Accurate, easy-to-read LCD screen.• Checks the battery, alternator systems• Two LED indicators• Overvoltage and Reverse Polarity Protection Contents: (1) Battery/Alternator Tester
-
HYPERION -
Greatcell Solar
Greatcell Energy is proud to introduce its fourth series of innovative solar simulators. Hyperion IV is designed to utilise LED light sources without a focal lens in a single DOT configuration, integrated with a revolutionary head and all the drive electronics.
-
TCR-300 -
Murraypro Electronics
1U rackmount unit that reads both Longitudinal and Vertical Interval Timecode. Decoded LTC/VITC Time & User values are displayed on the front panel LED display, and may be inserted onto a video signal for subsequent recording or display on a TV monitor.
-
mks Ophir
This sensor family provides cosine corrected irradiance measurement in W/cm² and dosage measurement in J/cm². The sensors are calibrated over their entire spectral range, and are thus ideal for irradiance and dosage measurement of UV, VIS and IR LED based light sources
-
mOByDic6500 -
Ozen Elektronik Inc.
After a LPG montage you can control the LPG/CNG leak in system . It works 8 hours with a rechargeable battery. A quick warmup time and a flexible sensor header allows to check leak in the difficult accesible places . It uses 10 LED display.
-
Finna Sensors
Results are continuous, instantaneous and non-destructive. Used among diverse applications including gypsum, powdered and granular materials, agriculture and wood products. Monitor required to complete system. (Sold Separately): SMART III RF LED Screen OR Touch Screen
-
LVD-20 -
Standard Electric Works Co., Ltd
● Contact type.● LED indication and audible alarm sound when voltage is present.● Designed for AC/DC voltage detection. ● Used for bare wires or conductors.● Self-test function.● For indoor use only.● Low power consumption.● Light weight and compact.
-
ZZ-0017-01 -
LXinstruments GmbH
- Monitor holder for 19 “rack installation- 9 U (400 mm)- Can be used universally with LED, LCD and plasma monitors- Compatible with the VESA standards 75 x 75 and 100 x 100 mm- Record in portrait and landscape format
-
TP121-TH -
Gigahertz-Optik GmbH
The photometric specifications of LEDs must meet very high tolerance requirements regardless of whether they are to be used in general, automotive or other specialist lighting applications. This is often a problem since the manufacturing tolerances of LEDs can be higher than those permitted in the end-use applications. Also, LED binning by LED manufacturers in order to classify LEDs based on their tolerances is performed with flash mode testing using pulsed current flow. However, end-use applications of the LEDs often operate in constant current mode and with significant thermal effects. The sophisticated LED processing industry therefore requires measurement devices that can be used for both manufacturer-compliant pulsed mode, as well as constant current operation mode. When the LEDs are run in constant current mode, the junction temperature has significant influence on the performance and lifetime of the LED. Therefore, test systems should be able to test the LEDs at specific junction temperatures.
-
Extech CB10-KIT -
Extech Instruments Corporation
The CB10-KIT is an Electrical Troubleshooting Kit that features three tools with 5 functions. The CB10 is an AC Circuit Breaker Finder/Receptacle Tester that locates circuit breakers and tests receptacle wiring. The CB10 allows the user to quickly locate 110 Volt to 125-Volt AC circuit breakers and fuses with audible and visual (LED lights) circuit breaker indication. The product also features a variable sensitivity adjustment to pinpoint correct circuit breaker. The second tool is the CT20, a Continuity Tester/Wire Tracer that tests continuity via bright flashing LED and loud pulsating beeper. The remote probe with LED allows a single user to trace up to three cables. The third tool in this kit is the DV20; an AC Voltage Detector/Flashlight with non-contact detection of AC voltage from 100 VAC to 600 VAC via built-in bright LED flashlight with ON/OFF button built in a rugged double molded housing.
-
278 HP -
Standard Electric Works Co., Ltd
● Protection class : IP65.● 3 LED indicators in a circle for easier viewing in any directions (360° LED indication).● 8 voltage settings : 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV● Bright LED visual indication● Frequency range: 40~70Hz● Longer hood makes LED indicators more visible● Audible indication● Easy-to-prove method.● Self-test function● Power source : 1.5V "C" type battery × 3● High impact nylon casing.● Non-contact detection by proximity● Compatible with most hot sticks.● Lightweight, robust & compact.● Suitable for indoor and outdoor use.● Easy access to batteries.● Special ranges are available upon request. ● The maximum detection range can be 500kV.● Meets EN 61326-1 CISPR 11 EN 61000-4-2 EN 61000-4-3 EN 61000-4-8
-
Sinowon Innovation Metrology Manufacture Ltd.
High precision marble base and pillar ensures the high stability of vision measuring system; High precision toothless rod and fast moving locking device ensures repeatability error is less than 2um;High precise working stage with 0.5um optical linear scales ensures the accuracy is less than 2.5+L/200um;High definitive detent zoom lens and high resolution color camera ensures clear image without distortion;With programmable surface 4-ring 8-division LED Cold Illumination and contour LED telecentric illumination and built-in intelligent light adjustment, it can automatic control the brightness in the 4-ring 8-division.
-
DHM1200 -
ZOGLAB Microsystem Co., Ltd.
NDIR (non-dispersive infrared) waveguide technology, 5 years working capacity CO measurement accuracy up to 40ppm~70ppm Key query operation, MAX / MIN / AVG value available White LED backlight for working in bad light condition
-
68-86 -
Testing Machines, Inc.
The 68-86 Digital Pocket Microscope delivers crisp, clear high-resolution colour images with a resolution up to 1280x1024 pixels. The integrated LED illumination can be switched on/off, which allows optional illumination for special investigations. The button on the DPM is pressed to capture an image.