Test

Portable Meter Site Test System

The Bantam Plus is the newest and most technologically advanced portable three-phase meter site test solution available for today’s metering professional. This innovative solution supplies a safe, accurate and highly versatile answer to the diverse test requirements of today’s electric metering.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Pulsed Withstand Voltage Safety Test

Suzhou 3ctest Electronic Co.,Ltd.

Designed to test the induced and conducted disturbance on the telecom lines generated by power line and electrical railway. It meets the requirements of YD/T 993-2006(The technical requirements and test methods of over-voltage and over-current resistibility for telecommunication terminal equipment), ITU-T K21 and ITU-T K44.

Product Home Contact/Sales Company Catalog Share Add To List

Primary Current Injection Test Set

T 3000 - Altanova Group

T 3000 is a primary current injection testing system designed to perform primary tests requested in substations commissioning. It allows to perform different tests and measurements on current transformers, voltage transformers, power transformers, protection relays, energy meters and transducers

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

AI-Powered Test Automation for Web Apps

QASymphony

Your agile team releases updates every week. You need a test automation platform that keeps pace and adapts to changes. Testim’s AI-powered SaaS platform helps you quickly write tests, minimize maintenance, and ship quality faster.

Product Home Contact/Sales Company Catalog Share Add To List

Professional Audio Test And Analysis Software

AudioExpress - Guangzhou Jumho Electric Co., Ltd.

AudioExpress contains a full range of audio solutions, including acoustic experiment, electro-acoustic analysis, environmental test, advanced signal processing, report generation, and data sharing. Electro-acoustic product test: amplifier, headset, cell phone, speaker, microphone, MP3

Product Home Contact/Sales Company Catalog Share Add To List

Massively Parallel Parametric Test System

P9001A - Keysight Technologies

The highest throughput parallel parametric test solution. 100-pin parallel measurement capability and faster single parameter measurement than Keysight 4080. Good data correlation with Keysight 4080. New per-pin parametric test unit module with all basic measurement function (voltage, current, capacitance, pulse, frequency). Easy development of parallel test plan. Easy migration from 4080 environment. Proven in 1st-tier logic foundries and memory companies.

Product Home Contact/Sales Article Company Catalog Share Add To List

AC Resonant Test System for Cable

HTXZ / 130 - Wuhan Huatian Electric Power Automation Co., Ltd.

Portable frequency conversion resonance voltage test device for domestic cables.

Product Home Contact/Sales Company Catalog Share Add To List

Becker NAV/RMU/RMI/OBS Test Fixture

TA-3320 - Tech-Aid Products

This NAV test fixture is specific to the requirements for testing Becker Avionics NAV, RMI and RMU products. The panel incorporates specific functionality required for testing these Becker products by the book including special requirements for the RMU 5000 and the IN 3300 series of nav indicators. This BAEE NAV test fixture also facilitates resolver alignment and discrete meter testing through the PG 3300 interface connector. The RM 3300 portion of the panel tests the Becker RMI indicators and allows for sourcing the composite signal from the paired radio or from an external generator. The DME channeling outputs are monitored with discrete LED's as well as the ILS, V/LOC, Glideslope and NAV TEST valids. Discrete test jacks are provided for all the meters and the resolver of the NAV indicator and a dimming source is also provided. When testing the RMU 5000 computer access is through a dedicated connector.

Product Home Contact/Sales Company Catalog Share Add To List

Rapid Temperature Change Test Chamber

Sanwood Environmental Chambers Co ., Ltd.

Sanwood is the company capable of offering a series of Rapid ESS Test Chamber,Rapid Temperature Change Test Chamber,Environmental stress screening (ESS) test chamber,Environmental stress screening test chamber,Temperature Change Test ChamberEnergy-saving design: Adopting PID + PWM principle of VRF (refrigerant flow control) technology to achieve low-temperature energy-saving operation (electronic expansion valve according to thermal energy conditions refrigerant flow servo control technology) low temperature working state, the heater does not participate in the work, through PID + The PWM regulates the flow rate and flow direction of the refrigerant, and regulates the three-way flow of the refrigerant pipe, the cold bypass pipe, and the hot bypass pipe to achieve automatic constant temperature to the working chamber. This method can reduce energy consumption by 30% under low temperature conditions.

Product Home Contact/Sales Company Catalog Share Add To List

Flash Programming for Functional Test Systems

Circuit Check, Inc.

Flash programming stations allow you to offload flash programming from functional test systems, increasing test throughput while improving capital utilization. Circuit Check flash programmer fixtures support multiple programmer types and multiple I/O configurations.

Product Home Contact/Sales Company Catalog Share Add To List

PCIe 6.0 Protocol Test Backplane

P5563B - Keysight Technologies

The Keysight P5563B PCIe 6.0 Protocol Test Backplane provides a convenient means for testing PCIe 6.0 add-in cards with a self-contained portable and powered passive backplane. The P5563B provides power required for all combination of exerciser and analyzer with device under test.

Product Home Contact/Sales Company Catalog Share Add To List

RF Conducted Immunity Test System

RFCI61000-4-6 - Lisun Electronics Inc.

RFCI61000-4-6 RF Conducted Immunity Test System is an automatic test system which is for the conduction sensitivity testing, it is fully meets IEC61000-4-6.2006, ISO11452-4, GB/T17626.6-2008 and GTB152B-CS114 etc standards. RFCI61000-4-6 internal source and broadband power amplifier can be generated 3 voltage test levels: 1v, 3v and 10v, and has the function of the real detect output level. It has two operation software which is calibration software and test software. When measuring, the signal is in 1 KHZ sine wave amplitude modulation system (80%) to simulate the actual harassment, and can through the coupling/decoupling network (CDN or electromagnetic clamp) to make the harassment signal coupled to the device.

Product Home Contact/Sales Company Catalog Share Add To List

Relay Buddy PRO Test Kit

191 - Electronic Specialties Inc.

Relay Buddy is a quick go / no-go tester for the most common automotive relays. With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays. Relay Buddy provides you with an indication of the general health and functioning of the relay switch contacts and coil. It will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

Product Home Contact/Sales Company Catalog Share Add To List

Test Automation Software for Laboratory Management

STARS ENTERPRISE - HORIBA, Ltd.

STARS ENTERPRISE is a completely new generation of software from HORIBA, consisting of innovative web and mobile apps in a cloud-based platform. It enables you to seamlessly and completely integrate all your measurement systems, test beds and specimens, as well as on-board systems in the laboratory or in mobile road tests. The numerous apps in the STARS Enterprise system offer you a universal, flexible and scalable software solution for accomplishing your entire test automation activities, today and into the future.

Product Home Contact/Sales Company Catalog Share Add To List

MASTER FUEL PRESSURE TEST KIT

FIT550 - Matco Tools

*Performs running, residual, rail and flow rate pressure tests*Large, easy-to-read 3-1/2" dual-scale gauge reads 0-100psi and 0-700 kPa*Kit includes: 50+ adapters, fittings, 48" hose, pressure relief and fuel discharge hose to test most domestic and foreign fuel injection systems*Also includes quick release couplers and adapters to fit other fuel injection test kits*For use with gas engines only

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Filter Results By:

Products

Applications

Manufacturers

Portable Meter Site Test System

Pulsed Withstand Voltage Safety Test

Primary Current Injection Test Set

AI-Powered Test Automation for Web Apps

Professional Audio Test And Analysis Software

Massively Parallel Parametric Test System

AC Resonant Test System for Cable

Becker NAV/RMU/RMI/OBS Test Fixture

Rapid Temperature Change Test Chamber

Flash Programming for Functional Test Systems

PCIe 6.0 Protocol Test Backplane

RF Conducted Immunity Test System

Relay Buddy PRO Test Kit

Test Automation Software for Laboratory Management

MASTER FUEL PRESSURE TEST KIT