Showing results: 301 - 315 of 846 items found.
-
RAM-34 -
Array Solutions
The RAM-34 is a complete pre-amplifier system designed primarily for the low bands 160M thru 40M. It has inputs for four receive antennas and internal 3-pole bandpass filters for 160M, 80M and 40M. In addition to the pre-amplifier, it has a step attenuator that togetherwith the amplifier stage provides gains from -20 dB to +20 dB in 5 dB steps. This allows equalizing the signal levels between the antenna inputs. Gain settings are memorized for each antenna on each band. Different types of receive antennas have different signal levels and the gain memories eliminate the need to adjust the receiver or pre-amplifier when switching between the antennas.
-
DCM-G.652-C-Fxx -
Hangzhou Huatai Optic Tech. Co., Ltd.
Huatai and DCM-G.652-C-Fxx dispersion compensation fiber module, is negative dispersion compensation based on optical fiber technology, can effectively compensate for G.652 standard single-mode fiber transmission band of 1525 ~ 1565nm dispersion and dispersion slope characteristic.
-
NX-1 -
Silex Technology
NX-1 is a high performance dual band wireless LAN network analyzer for SMB and Enterprise environments with 802.11a/b/g/n support. NX-1 provides an easy to understand simple menu that can be used even by those who are not familiar with specialized wireless LAN knowledge.
-
SX-ULPGN-BTZ -
Silex Technology
SX-ULPGN-BTZ is a dual band a/b/g/n Wi-Fi, Bluetooth low energy (BLE), 802.15.4 combo module for the Internet-of-Things (IoT). It is a single stream 1x1 WLAN, BLE 5 + 802.15.4 based on Qualcomm's QCA4020 System-on-Chip (SoC).
-
SX-59HLS -
Silex Technology
The SX-59HLS is an ultra-low power Hosted Dual Band 1x1 802.11a/b/g/n Internet-of-Things (IoT) wireless module based on the Qualcomm QCA4012-2 System-on-Chip (SoC). The SX-59HLS is a first in its class to provide enterprise security for today’s high performing networks.
-
inSSIDer Office -
MetaGeek, LLC
InSSIDer Office is a WiFi troubleshooting and optimization tool that takes small WiFi network management to a whole new level. With a quick glance, you’ll be able to find poor channel placement, low signal strength, and RF interference in the 2.4 and 5 GHz bands.
-
Rohde & Schwarz GmbH & Co. KG
In EMC applications, usually only the average power is of interest. This is where the R&S®NRPxxA/AN average power sensors are the perfect fit. They cover measurement ranges that are used in radio telecommunications as well as the important lower frequency bands down to 8 kHz
-
NRF24L01+ -
SparkFun Electronics
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature - very nice!
-
R24XE -
Elmika
The R24XE Scalar Network Analyzers provide both manual and automated VSWR, insertion and return losses measurements in five waveguide bands from 33 to 225 GHz. The system consists of the G44XE sweep generator, waveguide reflectometer, network analyzer and personal computer.
-
Ducommun Inc
Our self-contained, in-house components design and fabrication capacities ensure the breadth of sub-assemblies offered from rapid prototyping and proof of concept to full production. Ducommun has produced many high performance millimeterwave band sub-assemblies for commercial and military system applications. Among them, the K and Ka band directional Doppler Radar front ends are in production. Several hundreds of sets have been delivered. In addition, Ducommun has delivered Ka through W band engineering prototypes for plasma detection system, automotive Radar, speed Radar, automatic test set, radio telescope, missile terminal guidance, telecommunication system etc. applications.
-
CMX-Z25 -
Rohde & Schwarz GmbH & Co. KG
Complex devices under test (DUT) come with additional antenna ports to support low, mid and high bands - and advanced MIMO schemes such as 4x4 MIMO. The R&S®CMX-Z25 is the solution: Up to 16 DUT ports can be supported with just 4 ports from R&S®CMX500. So even prototypes of 5G smartphones, tablets, laptops or industrial modules with an extended number of antenna ports can now be connected to a single R&S®CMX500. Together with the scalable CMX architecture any 5G and 5G Advanced mobile device can now be tested in one go - without recabling or 3GPP band combo limitations.
-
. -
Vayyar Imaging Ltd.
Vayyar chip covers imaging and radar bands from 3GHz-81GHz with 72 transmitters and 72 receivers in one chip. Enhanced by an integrated, high-performance DSP with large internal memory, Vayyar’s sensor does not need any external CPU to execute complex imaging algorithms.
-
Ranatec Instrument AB
Ranatec’s digital step attenuators covers all mobile frequency bands and gives a calibrated attenuation range of more than 90 dB in steps of 0.25 dB. All Ranatec digital attenuators are built as modules and offers both serial and parallel control logic.
-
Com-Power Corporation
Log Periodic antennas allow quick sweep measurements without a band break. This feature makes it convenient to use the Log Periodic antenna with a automated emissions or immunity measurement system. The size of the antenna also allows it to be used in a small area like a shield room.
-
Salicon Nano Technology
We are instrumental in offering quality range ofMicrowave Products that finds application in satellite communication, broadcast and educational centers. Our range includes microwave test bench, critical microwave band & joint and MIC trainer. These products are known for optimum performance and high efficiency.