Showing results: 4276 - 4290 of 5237 items found.
-
CFL SG 0810 -
Scope T&M Pvt, Ltd.
SCOPE offers CFL SG 0810, Surge Generator with output of 8kV and 1000 Joules. It is ideal choice for fault location on all types of power cables from LV to MV. CFL SG series is equipped with different Protections, Interlocks and Auto-discharge facility to ensure user safety during operation. User friendly controls, adequate form factor, contact free HV terminations makes this CFL SG series most durable and best-designed sets in the segment
-
CFL SG 1610 -
Scope T&M Pvt, Ltd.
SCOPE offers CFL SG 1610, Surge Generator with output of 16kV and 1000 Joules. It is ideal choice for fault location on all types of power cables from LV to EHV. CFL SG Series is equipped with different Protections, Interlocks and Auto-discharge Facility to ensure User Safety during operation. User Friendly controls, adequate form factor, contact free HV terminations makes this CFL SG Series most durable and best-designed sets in the segment
-
CFL SG 3210 -
Scope T&M Pvt, Ltd.
SCOPE offers CFL SG 3210, Surge Generator with output of 32kV and 1000 Joules. It is ideal choice for fault location on all types of power cables from LV to EHV. CFL SG Series is equipped with different Protections, Interlocks and Auto-discharge Facility to ensure User Safety during operation. User Friendly controls, adequate form factor, contact free HV terminations makes this CFL SG Series most durable and best-designed sets in the segment.
-
Y1271A -
Keysight Technologies
The Y1271A is a complete rackmounting kit for the M9010A PXIe chassis. It includes rack flanges, handles, and attachment hardware. This kit allows you to mount the Keysight M9010A PXIe chassis flush with the front of the rack or to recess it up to 140 mm (5.5 inches) in 20 mm steps. Recessing the chassis allows for better cable management. The Y1217A rack rail kit is required and can be ordered separately. A minimum of 1U of rack space is required for ventilation above the chassis.
-
777145-02 -
NI
68-Pin Female VHDCI Right Angle to 68-Pin Female Screw Terminal, Desktop Mount Terminal Block - The CB-68LPR is a terminal block with 68 screw terminals for easy connection of field I/O signals to 68-pin NI data acquisition devices. It includes one 68-pin male connector for direct connection to 68-pin cables. This CB-68LPR features standoff feet for use on a desktop or mounted in a custom panel. The CB-68LPR also has a right-angle-mounted, 68-pin connector.
-
12-2415 -
Associated Equipment Corp.
*Shown with optional 12-2416 barcode scanner*Graphical Hand-Held Tester with Thermal Printer and USB Port*Tests 12V Flooded, AGM, Gel Cell, & EFB Batteries from 100 to 2000CCA*Graphical/Symbol Based LCD display*Tests 12/24V charging and electrical systems*Stores last 70 test series with or without power*Carrying case, printing software and USB cables included*Built-in thermal printer with thermal paper (611305)*Field-Replaceable Cables (900165)
-
Extech UM200 -
Extech Instruments Corporation
The Extech UM200 is a precision Micro-Ohm Meter which features a resolution down to 1 µΩ. The UM200 has 6 ranges with 3 sub-ranges in each current range. It features a 5-Digit backlit LCD, PC interface, auto or manual ranging, and a 10 A maximum test current. Store/Recall up to 3000 measurements. Complete with 4-wire cables with Kelvin clip connectors, rechargeable Li-Polymer battery, AC adapter/charger, software and USB cable, and soft carrying case.
-
TVCS--5500 Series -
TestVonics, Inc.
TestVonics offers complete Air Data Solutions for both commercial and military organizations. These packages include everything the end user needs to test, calibrate and re-certify a variety of air data equipment. Packages vary and may include the following:*High Precision Air Data Calibrator*Test Set Support Equipment (ie MCTS, PVT)*Vacuum and Pressure Sources*Universal Power Supply*Pitot & Static Hose and Test Cable Assemblies*Pre-Configured Rackmount Enclosures Available
-
Tempo Communications, Inc.
There are times when using a conventional test telephone or other device to check whether a line is "dead" before cutting it down just won't work. One example is where a cable can be carrying an "out-of-band" service, like ADSL and VDSL, which are inaudible using conventional monitoring equipment. T-Bug will specifically identify the nature of the service on a line, whether xDSL or ISDN, while the DigAlert™ probe will warn if any high frequency signal is present. Check before you cut.
-
ENVIROMUX-M-DCS -
Network Technologies Inc
Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary). Can also be used for monitoring side wall and covers. Includes mounting hardware. For normally closed circuit connection. 2-wire interface. Screw terminal. Maximum cable length: 1,000 ft. Wide actuating gap, approximately 1". Dimensions WxDxH (in): 0.5x0.5x2 (Switch), 0.5x0.5x2 (Magnet). Operating temperature: 32 to 158°F (0 to 70°C). Regulatory approvals: RoHS.
-
CA3002 -
UC Instruments, Corp.
The integrated style design makes the size compact and operation easy. You are no longer to worry about so many cables between monitor and microscope, greatly saving the time for operation and worktable space, thus creating more productivity. Easycheck have a series different model according to different application, it has photo capture function; for transceiver checking; X、Y adjustable; image auto analysis and judgement, etc. The user can choose the desired model per the requirement.
-
Model DI-2008 -
DATAQ Instruments, Inc.
Includes DI-2008 instrument, WinDaq software, calibration certificate, terminal screwdriver, and USB cable (6-feet). Eight differential and isolated analog input channels. Seven bi-directional digital input ports, including: Counter input for totalizing applications, Rate input for frequency/flow/rpm applications. ChannelStretch™ channel expansion to 128 analog and 112 digital channels. Programmable voltage and thermocouple measurements per channel. 10 mV to 50 V programmable range per channel in 12 steps.
-
esmo AG
for test heads up to 250 kg / 550 lbsfinal test dedicatedhandler docking prolowest possible floor loadeasy motion in z-direction to facilitate docking processforce feedback control feature ensuring operator safety and protecting equipment during set-upactive cable managementdurable and robust designoptimized footprint for various test heads580 mm linear in/out motion for handler service access160 mm linear side-to-side feature270 column pivoting featurenumerous additional, unique features for individual set-up requirements
-
SKU-040-XX -
Amfeltec Corp.
The Flexible x1 PCI Express 3-Way Splitter (Splitter) was designed to expand the modern motherboard (ATX, mini ATX, etc.) with a limited number of PCI Express connectors. It allows you to connect up to three x1 PCI Express add-in boards to your motherboard’s x1/x4/x8/x16 PCI Express connector.The Splitter includes an x1 PCI Express adapter board (optional – x4 PCIe) with a PCI Express flat cable (up to 3 boards) and a x1 PCI Express host board.
-
SKU-042-XX -
Amfeltec Corp.
The Flexible x4 PCI Express 4-Way Splitter was designed to expand your modern motherboard (ATX, mini ATX, etc.) with a limited number of PCI Express connectors. It allows you to connect up to four x1 / x4 / x16 PCI Express boards to your motherboard’s x4/x8/x16 PCI Express connector.The Splitter includes four x1 (or x4, or x16) PCI Express adapter boards with PCI Express flat ”ribbon” cables, and one x4 PCI Express host board.
