Filter Results By:

Products

Applications

Manufacturers

Processing

Manipulates and analyzes a signal.


Showing results: 1171 - 1185 of 1698 items found.

  • PCI-8 AE Board

    Innerspec Technologies, Inc

    The PCI-8 is an 8-channel, PCI-based AE system on a board. Its 8 high-speed AE channels offer simultaneous AE data acquisition, waveform processing and data transfer. The board’s standard PCI form factor enables installation in standard PCs, as well as in any of Physical Acoustics’ specialized AE system chassis, while the PCI bus enables AE data transfer at speeds of up to 132 Mb/s, at a frequency range of 1 kHz to 400 kHz.

  • PCI D/S, S/D, I/O & Comm Board

    76CS3 - North Atlantic Industries

    NAI’s 76CS3 is a PCI/PCIe multifunction I/O and communication board designed for applications requiring Digital-to-Synchro/Resolver (D/S) and Digital-to-LVDT/RVDT (DLV) stimulus output, as well as I/O and communication functions. This full-slot board contains five independent, function module slots. The board can be configured for 6 separate D/S channels, or for D/S in combination with I/O and communication modules. Using multiple DSPs, the enhanced motherboard enables higher processing power and dedicated pre-processing control for each module.

  • Marking System

    Green Laser Series - PowerTECH Co,Ltd.

    Adopts the international advanced harmonic oscillated cavity design and laser control technology to realize that laser can obtain good beam quality under high power operation with high long-term stability and narrow laser pulse width. Special cavity inside heat compensation and harmonic conversion technology can realize doubled-frequency conversion of high efficiency. Suitable for laser trimming resistor thin film photovoltaic battery manufacture micro processing LED chip marking PCB.

  • Microwave Frequency Counter (up to 40GHz)

    S4382 - Saluki Technology Inc.

    Saluki S4382 series microwave frequency counter adopts microwave sampling technology to realize microwave measurement. The function control, measurement sequence and data processing of the whole measurement process are completed by the internal microprocessor. It is a new generation of intelligent microwave frequency measurement instrument. The instrument adopts medium and large scale integrated circuits and some monolithic integrated circuits with excellent performance, which makes the design of the instrument more reasonable, with low power consumption and high reliability.

  • Square Wave Patterns (Ronchi Gratings/Rulings)

    Applied Image, Inc.

    Square Wave patterns (Ronchi Gratings/Rulings) have extremely sharp edges. At APPLIED IMAGE, this sharpness is achieved through our unique manufacturing capabilities and processing technologies which produces the sharpest edges available anywhere. Our standard line of Ronchi Gratings is offered on Chrome on Glass (CG) and Photo Paper (RM).The Ronchi rulings are available on other substrate materials such as B270, quartz, BK-7, and White Opal as well as in English frequency metrics (cycles per inch).

  • SparkFun 2D Barcode Scanner Breakout

    SparkFun Electronics

    The SparkFun 2D Barcode Scanner Breakout is a nifty little breakout board featuring the DE2120 barcode scanner module from DYScan. The DE2120 reads 20 different barcode symbologies (both 1D and 2D) using a camera coupled with on-board image processing to identify and decode everything from UPC codes to QR codes. The module also features two LEDs: one for illumination and one to project the red line that you're used to seeing from laser-based scanners.

  • Cable & Antenna Analyzer

    Shanghai Tarluz Telecom Tech Co., LTD

    Adopting new techniques like advanced radio frequency and digital hybrid integration design, broadband and fundamental wave mixing, digital IF processing and intelligent power management, etc., The Cable and Antenna Analyzer has advantages of fast measuring speed, high measurement accuracy, small size, light weight, battery power, touch screen operation and adjustable backlighting. It can measure return loss, standing wave ratio (SWR), impedance, phase, DTF (discontinuity point fixing), etc.

  • Monitor SDR Boards

    Multiple Access Communications Ltd.

    MAC Ltd’s MONITOR product family includes a number of software-configurable digital signal processing platforms intended for use in radio frequency (RF) receiver and transceiver applications. The MONITOR products are available in assembled printed circuit board (PCB) form for integration into larger systems. They also form the basis of MAC Ltd’s CatchAll™ radio products. In addition to the standard products listed below, MAC Ltd is happy to discuss the customisation of existing products and/or the development of new bespoke hardware and software.

  • Smart Emissions Measurement System

    SEMS - HORIBA, Ltd.

    The Smart Emissions Measurement System (SEMS) is an independent, secure big data cloud service and data processing offer used to collect emissions data from any light- or heavy-duty vehicle using combustion engines. This data can be measurements taken during road use, from a database offering a statistically reliable number of vehicle measurements or results from other existing PEMS tests. All measured data is transferred to a cloud-based data server and analysis will be done on HORIBA’s Enterprise platform.

  • Detective Logic Analyzer

    LPDDR5 - FuturePlus Systems

    Provides logic analyzer like deep transaction Listing and Waveform captureCan store up to 512M of captured States at up to 6400+ MT/sContinuous, real time analysis, not post-processing2D (voltage & time) Eye Detector guarantees valid data acquisition on each signalExtensive Triggering and Storage Qualification allows precise insightIndustry Leading Protocol Violation Detector provides hundreds of simultaneous, real time tests to JEDEC specifications, NOT post processing. No other tool can provide this!Mode Register Listing provided

  • I-Pi SMARC Development Kit based on NXP® i.MX 8M Plus Quad Arm® Cortex-A53 Processor

    I-Pi SMARC IMX8M Plus - ADLINK Technology Inc.

    The I-Pi SMARC IMX8M Plus is a SMARC-based smart solution development kit powered by NXP i.MX8M Plus (Quad-core Arm Cortex-A53) processor with a Neural Processing Unit (NPU) at up to 2.3 TOPS.This is the first SMARC R2.1 development kit focused on machine learning, vision, advanced multimedia, and industrial IoT with high reliability. As such, it supports dual image processors and two camera inputs for an effective Vision System, as well as applications beyond, including smart homes, building cities, and industry 4.0.

  • Spectro UV-Vis Double Beam PC Scanning Spectrophotometer

    UVD-2950 - Spectrophotometer.com

    Spectro UV-Vis Double PC is a high performance UV-Vis double beam automatic scanning spectrophotometer. Spectro UV-Vis Double has a brand new optical system design, microcomputer controlled. It is capable of processing data, from analytical and spectrum testing. Precise with high accuracy of measurement and stability are also provided by the powerful built in software and large LCD screen, which can display the screen menu and other functions. It can also be linked to a computer and a printer to show Photometric and Spectral data in the PC monitor.

  • Condition Monitoring

    Allen-Bradley

    Condition monitoring products help you keep your plant floor running productively by detecting potential equipment failures. We offer real-time protection modules, sensors, portable instruments, and surveillance software. Our XM® Series of intelligent I/O modules performs real-time processing of critical parameters used in assessing the current health and predicting the future health of industrial machinery. Apply our XM modules in standalone systems or with existing automation and control systems.

  • Sample Conditioning Packages

    Bacharach, Inc.

    Neutronics Sample Conditioning Packages are designed to ensure that our oxygen sensors always have a clean and dry sample gas stream. Process conditions that include solvents, corrosive chemicals, and temperature extremes present significant challenges. To deliver accurate and reliable gas measurement, sensors require a sample that is free of contaminants. Sample conditioning systems built to withstand harsh processing conditions and efficiently remove damaging contaminants from the sample stream are critical to delivering reliable continuous-duty low-maintenance gas monitoring.

  • Wideband Digital Down Converter

    Abaco Systems Inc

    A Digital Down Converter performs channel access functions in digital receivers. It is used for extracting a channel (frequency band) of interest in a wideband signal. Abaco Systems' wideband DDC core employs a quad DDC architecture to achieve ultra high performances. The core accepts up to 16-bit complex data and can process 1GSPS continuously. With a fully programmable architecture at all stages of the processing, this core combines flexibility and speed and can be used in combination with our dual-channel 1GSPS ADC module.

Get Help