Showing results: 361 - 375 of 429 items found.
-
SCR ELEKTRONIKS
SCR ELEKTRONIKS focuses on designing a solution around the end use at her customer. Instead of offering a standard instrument for a specific task, we have an approach of customizing the test bench to target the specific goals of the process or test procedure. Our measurement instruments, test modules, electrical power systems & software libraries are developed with this vision, thereby reducing the test system’s time-to-deploy.
-
Circuit AOI -
Machvision
The Circuit AOI system is designed to perform automatic and accurate inspecting systems. It integrates rigid mechanical system with advanced vision technology and manufactured and tested by strict is standards. It is suitable for circuit inspection for PCB/FPC, verification and repair. Innovation and unique inspection algorithms are applied to inspect open, short, protrusion, nick, scratch, pin hole, island, line width/space violation, object missing and others defects. AOI system can use offline setup project and check results. It will improve the throughput.Compare to halogen lighting, the full angle LED lighting of Circuit AOI can obtain the best image contrast and is good for different panel type inspection.
-
SPI-III™ -
ndb Technologies Inc.
Our vision has always been to create a phase identification system that exceeds any of today’s industry quality, safety and efficiency requirements. SPI-III’s unique design consists of a wireless bi-module combo that is stunningly easy to configure and operate. With many advancements and innovations, SPI-III will be more helpful than ever before, enabling field applications such as identification of A-B-C electrical phases from all 50 and 60 Hz networks, switchgear phase concordance (matching), phase rotation, system paralleling, underground phasing applications and more.
-
ViTec Co. Ltd
The amount of information processed and time constraints required the creation of a multi-level distributed image processing system based on National Instruments Compact Vision System controllers, industrial computers and workstations. During the control process, the wheel is watered with a magnetic-luminescent emulsion, magnetized and exposed to ultraviolet radiation. As a result, the emulsion deposited on the defects glows in the visible range (yellow-green light). Eleven FireWire (IEEE 1394) color cameras with a resolution of 1280 x 1024 are used to scan the wheel surface. In one iteration, they completely cover a 20-degree sector of the wheel.
-
Eye Vision Technology GmbH
The ready-to-use systems offer a variety of solutions with smal learning time and just a few clicks of a button in industries such as food and beverages, electronics and in areas such as deep learning, thermography, 2D and 3D image processing. The systems include the EyeVision software solution for free adaptation, as well as the EmSys computer hardware and an industrial camera from one of the supported manufacturers such as Allied Vision Technologies, Basler, Baumer, Teledyne Dalsa, or thermography cameras from Optris or Flir. Both GigE and USB cameras are available for cameras.
-
Cyth Systems llc
Cyth Systems is a Systems Integration Company specializing in Automated Test (ATE), Embedded Controls, and Machine Vision. Our skilled and experienced team uses their natural talent for problem-solving to create solutions in a wide range of industries. We build our solutions starting with the National Instruments (NI) platforms including LabVIEW and PXI, and by adding best-in class sensors and components.
-
Lt-C/M4030 -
Teledyne Lumenera
When it comes to aerial imaging systems, size, weight, and power restrictions (also known as SWaP) are the deciding factors. These limitations impact flight time for applications such as, precision agriculture, aerial surveillance, photogrammetry, and aerial inspection. Teledyne Lumenera’s Lt-C/M4030 camera offers excellent imaging performance and provides just the right combination of size and performance for unmanned aerial vehicles (UAVs), and a wide variety of other vision applications.
-
Teledyne e2v
The vision market is constantly looking for highly specialised, cost effective solutions where performance is not compromised. Teledyne e2v has over 40 years of heritage in imaging, with a background in the design and manufacture of CCD and CMOS image sensors.Capabilities include ultra-high speed and ultra-low noise. Teledyne e2v’s unique approach involves listening to the market/application challenges of customers and partnering with them to provide an innovative solution which brings real value to their systems.
-
xiB 64 -
XIMEA GmbH
*High-speed interface with a bandwidth of 64 Gbit / sec*CMOSIS sensor: CMV12000*Luxima sensors: LUX13HS, LUX19HS, LUX160*Gpixel sensors: GMAX0505, GMAX3265*Resolution from 1 Mpix to 65 Mpix*Speeds from 333 Fps to 3500+ Fps*Suitable for OEM customization and Embedded vision systems*Distances up to 300m over fiber-optic cable*Compact housing: 60 x 70 x 55 mm
-
2WIN-S -
Adaptica Srl
2WIN-S is a binocular and portable vision screener that measures the refraction of both eyes and discovers other ocular impairments. The Kaleidos tube serves as a darkroom for the device and allows the exam to be performed in any light condition: while the patient looks inside of it, the system automatically detects refractive errors in less than three seconds. 2WIN-S measures objective refraction in the range of -15D to +15D, and phorias/tropias in prismatic diopters, as well as other additional features.
-
Radiant Technologies, Inc.
Radiant's Chamber/Pyroelectric Task sets the sample to a series of temperatures by performingGPIB control of an external thermal device. At each temperature it captures the sample’s polarization response and/or small-signalcapacitance. These are combined to calculate the pyroelectric coefficient. The Pyroelectric Task is to be used with a Radiant Test System and a Linkam Stage (-196C to 600C), Thermal Chambers, Hot Chucks, or a Furnace to automatically measure the Pulse Polarization response and Small Signal Capacitance of a Pyroelectric material that is being heated and/or cooled. Radiant's Pyroelectric measurement Task can be added to Vision at additional cost. This measurement suite fully characterizes the pyroelectric charge (polarization) response of the sample under test. The Pyroelectric Task suite controls various thermal controllers such as Quantum Design, Lake Shore, Delta Design, and many others. Detailed Listing of Thermal Controllers Registered in Vision. The Chamber/Pyroelectric Task is quoted upon request.
-
Radiant Technologies, Inc.
Radiant Technologies, Inc. specializes in the measurement of electrical and piezoelectric properties of non-linear materials. The Piezoelectric Task captures a sample's displacement as a function of voltage profile along with the sample's polarization response. An external displacement measurement instrument must be attached to a Radiant Precision Test System to make this measurement. All of the Radiant testers are equipped with a high-impedance voltage input to capture the output of a displacement sensor. Every Vision measurement task will collect data from that sensor input simultaneously with the measurement being executed. Radiant's test systems work easily with displacement sensors which include:
-
AP-P Series -
Applied Image, Inc.
The AP-P is a unique calibration target that is designed to test the position and/or recognition ability of a vision system. The matrix of small scales, precisely positioned in a grid matrix format, makes testing for subject recognition and system positioning simple.The overall target is comprised of a matrix consisting of 6.0mm x 6.0mm square individual components each having a 5.0mm x 5.0mm X & Y Scale with 0.100 divisions. The scale has pitch accuracy of 1μm. The AP-P is available on two standard materials; Chrome on Glass (CG) and Chrome on Opal (OP).
-
Hydra3D -
Teledyne e2v
Hydra3D is a 832 x 600 pixel resolution Time-of-Flight (ToF) CMOS image sensor, designed with Teledyne e2v’s proprietary CMOS technology, enabling the next generation of 3D vision systems. Hydra3D includes a 10µm three-tap cutting-edge pixel, which provides very fast transfer times for customers seeking the highest levels of 3D imaging performance, including high depth resolution, high speed and flexible operation conditions.
-
Robotic Welding Defect Detection -
ADLINK Technology Inc.
ADLINK and Intel have developed an automated defect-detection solution for robotic welding in heavy equipment manufacturing using machine vision AI to increase output, improve quality and reduce costs. The system detects welding porosity defects and stops the welding process performed by a robotic arm. The integrated solution sends a stop command to the robot when a defect is identified – all in real-time at the edge and has proven 97% accuracy in detecting weld porosity defects.
