Showing results: 886 - 900 of 4207 items found.
-
DLNA8-40-50-2582 -
COM-MW Co., Ltd.
Low Noise Amplifier, Frequency 40~50GHz, Gain 38dB, Noise figure 3dB, P-1dB 13dBm, 1.85mm-Female Removable
-
Shanghai Launch Electric Co., Ltd.
Applied for power frequency voltage withstand and partial discharge testing on cables and cable accessories with the voltage class up to 1100kv.
-
KM 6300 -
Kusam Electrical Industries Limited
Measurement of current, voltage, active, reactive and apparent power, Power factor, line frequency, energy, harmonic and Maximum Demand.
-
Trig-Tek™ 203PC-1/2 -
Astronics Corporation
Operates with high temperature accelerometers where pyroelectric effects may be encountered, with frequency range from 3 Hz to 40,000Hz
-
Schwarzbeck Mess Elektronik
The broadband horn antennas BBHA 9120 offer a very low SWR in their nominal frequency range and a very broad bandwidth. The gain increases with frequency up to approx. 21 dBi, depending on the horn's size and shape. The increasing gain with frequency helps to compensate cable losses. The BBHA 9120 series is suitable for both, transmission and receiving applications. The max. allowed Input Power is only limited by the female N-connector. The detailed manual of the calibrated test antennas includes Gain, Antenna Factor, SWR and Directional Patterns. The antenna is mounted with the 22 mm tube, equipped with a Index Ring for quick changes of polarisation without using tools.
-
ECO-TECH
Is sound that is lower in frequency than 20 Hz (hertz) or cycles per second, the "normal" limit of human hearing. Hearing becomes gradually less sensitive as frequency decreases, so for humans to perceive infrasound, the sound pressure must be sufficiently high. The ear is the primary organ for sensing infrasound, but at higher intensities it is possible to feel infrasound vibrations in various parts of the body.
-
FMC406 -
Sundance Multiprocessor Technology Ltd.
The FMC406 is a low-noise clock generation and distribution module with eight clock outputs and eight trigger outputs that are fully synchronized. This module can either distribute an externally supplied clock or a locally generated clock. In the standard configuration, the FMC406 can generate any clock frequency between 34.375 MHz and 250MHz and lock it to an internal or external reference. The maximum clock frequency can be extended to 350MHz as a build option.
-
Techimp HQ S.r.L
The NLFA is a multiple element device allowing several useful field configurations. The three internal elements,one low frequency amplifier, two notch amplifier each with the cut off freq. of 50Hz (or 60Hz for a specific version) can be used as independent ones or combined together to increase the notch function. The effect of the cascade of two notches is the increasing of the signal attenuation for the notch frequency.
-
377C10 -
PCB Piezotronics, Inc.
Performance:Nominal Microphone Diameter:1/4"CharacteristicPressure Open Circuit Sensitivity1.0 mV/Pa1.0 mV/PaFrequency Range (2 dB)4 to 70000 Hz4 to 70000 Hz Lower Limiting Frequency (-3 dB)0.25 to 3.0 Hz0.25 to 3.0 Hz Resonant Frequency (90 Phase Shift)65000 Hz65000 HzHumidity Coefficient of Sensitivity (0 to 100%, non-condensing)0.0012 dB/%RH0.0012 dB/%
-
SM-4120 -
MCH Instruments Co.,Ltd.
*High resolution, high accuracy, high stability, superb price/performance.*High visible VFD display, easy-to-use knob and keys.*Multi-wave forms are suitable for various application areas.*Wide sweep frequency range, start and stop frequency can be set independantly in sweep function. It can be used as digital sweep analyzer with an oscilloscope.*SMT craft. New-style metal case.*MTBF: >1000h
-
SM-4020 -
MCH Instruments Co.,Ltd.
Features:*High resolution, high accuracy, high stability, superb price/performance*Highly visible VFD display, easy-to-use knob and keys*Multi-wave forms are suitable for various application areas*Wide sweep frequency range, start and stop frequency can be set independently in sweep function. It can be used as digital sweep analyzer with an oscilloscope.*SMT craft. New-style metal caseMTBF:>10000h
-
National Technical Systems
Dynamic frequency selection is a technology that is designed to ensure that wireless devices operating in the unlicensed WLAN 5 GHz bands are able to detect when they may be interfering with military and weather radar systems and automatically switch over to another frequency where they will not cause any disturbance. These formal requirements are in effect in the USA, Canada, Europe, Japan, Australia, Korea and other markets around the world.
-
72-7635 -
Tenma
*2 Analogue channels*800x480, 7" Widescreen LCD display*Print screen feature*24 Automatic and 2 advanced measurements*Unique waveform recording and replay function*6 Digital trigger frequency counter*6 Digital trigger frequency counter*USB drive system software upgrade*24 month limited warranty *view Terms & Conditions for details
-
104-DIO-48E -
Acces I/O Products, Inc.
The circuits use an 82C55A PPI with mode 0 supported. Ports A, B and C are buffered with 74ABT245 transceivers and pulled up to 5V. The optional 82C54 has three-sixteen bit down-counters within one chip. These counters are useful for making frequency outputs, measuring frequency of square waves, pulse width outputs, pulse width measurements etc. Software drivers are provided on CD.
-
Copper Mountain Technologies
With our custom VNA your ATE works as one software system running on a single computer. We can customize the analyzer module to fit in your system, provide extra frequency range coverage as compared to our standard VNA models should you need it in your specific application or characterize the expected performance outside the frequency limits of our standard VNAs.