Filter Results By:

Products

Applications

Manufacturers

Standards

A controlled reference or acknowledged technical criterion.

See Also: IEC, IEEE, Mil, Interoperability Test, Compliance


Showing results: 3706 - 3720 of 6683 items found.

  • Solid Density Analyzers

    Anton Paar GmbH

    The solid density analyzers from Anton Paar are tried and tested solutions. The Autotap and Dual Autotap tapped density analyzers conform to a wide range of international standards for the determination of bulk density. The Ultrapyc automatic gas pycnometers are ultra-simple to use and provide ultra-precise skeletal density or true density measurements of your solid materials. The Micro Rotary Riffler ensures representative sampling of the samples typically used for particle size, mercury intrusion, and gas sorption experiments from the larger amounts delivered to your lab.

  • UL Testing

    National Technical Systems

    UL’s testing services are organized into sections that evaluate specific types of products. To establish recognition, manufacturers are requested to submit samples for assessment in accordance with specific UL standards. NTS performs the applicable evaluation and testing of these samples and then assembles the data packet for UL review. Upon compliant results, UL then evaluates the test data and makes the final determination as to whether a product is eligible for recognition. Upon test data review and acceptance by UL, Notification of Authorization (NofA) is issued to the manufacturer to apply the UL certification mark to their products.

  • Flash SATA Disk /SATA2 SLC

    FSA 2.5-inch Series - Axiomtek Co., Ltd.

    Axiomtek's FSA (Flash SATA Disk) series is a high performance 2.5" flash disk and fully compatible with SATAII standard which make it an ideal replacement for conventional SATA HDD without any driver or system modification. This 2.5" SATAII flash disk is provided with huge capacities up to 256 GB to meet diverse needs of data storage. With the features of high capacity storage, data integrity, anti-vibration and low power consumption, the FSA series is surely a solid solution for expanding an industrial computers memory.

  • MCB Tripping Current Characteristic Test Bench

    SCR ELEKTRONIKS

    The SCR Elektroniks 12 station MCB Tripping Characteristics Test Bench is optimally designed to verify the Tripping Characteristic of MCBs as per clause 9.10.1 of IEC 60898 (Also mentioned in Indian Standards IS 8828). The bench essentially comprises of Servo Controlled mechanism to set and maintain desired current (against incoming mains fluctuation) and a Micro controller based master controller unit plus timer, which governs the entire sequence of operation making it a stand-alone system once the user connects the MCB and configures the test parameters.

  • Atlas ESR PLUS - Equivalent Series Resistance Meter

    ESR70 - Peak Electronic Design Ltd.

    The Atlas ESR provides instant measurement of a capacitor's ESR and it's capacitance value. Using the supplied gold plated probes (removable), the Atlas ESR can measure ESR down to a resolution of 0.01 ohms, up to 40 ohms. It can even measure ESR for capacitors that are in-circuit. Measurements are made at the industry standard frequency of 100kHz. Probes are now removable, allowing 2mm compatible probes to be fitted. Audible alerts are produced for various ESR levels allowing you to perform many tests in succession without having to look at the display.

  • Drop Tester

    SKZ122 - SKZ Industrial Co., Ltd

    Drop tester is mainly applying in modeling the falling impact influence of packages in transportation and loading. It is used to identify the impact endurance and designable rationality of packages, Standards: TAPPI 802, ISO2248 ASTM D5276.The use of double-column, two-wing orientation, drop height can be input, work stable and reliable. It meanly used in simulating package used in the transport, loading and unloading process by the fall of the impact of shocks, inspect its impact strength and whether packaging design of the impact strength is reasonable, in order to improve and perfect the packaging design.

  • Waveguide Power Sensor

    R8486D - Keysight Technologies

    Excellent SWR for reducing mismatch uncertainty50 MHz calibration port Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter Accurate average power measurements over -70 to -20 dBm Frequency range 26.5 GHz to 40 GHz Diode power sensing element

  • Waveguide Power Sensor

    Q8486D - Keysight Technologies

    Excellent SWR for reducing mismatch uncertainty50 MHz calibration port Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter Accurate average power measurements over -70 to -20 dBm Frequency range 33 GHz to 50 GHz Diode power sensing element

  • Telescopic Hot stick

    HS-180 - Standard Electric Works Co., Ltd

    ● Triangular-shaped design keeps sections aligned during extension and retraction● Push button release for stick extension and retraction ● Telescopic design allows for easy assembly, storage and transportation● Lower push button fix position for better support of the telescopic hot stick● Withstands voltage rating of 100kV from 30cm for 5 minutes● Universal end fitting accepts a wide variety of standard attachments● High-visibility yellow tip section● Easy-to-replace sections● Carrying bag included● Optional integrated height measurement scale

  • Ideal ATE Data Analysis Tool

    yieldWerx Semiconductor

    For decades engineers have used STDF as the standard format for ATE test output- data logs, and yieldWerx automatically parses this format. However, with the increase in engineer’s usage of the general data record type (GDF) this usage often results in every product test program’s data log having a unique format from which you need to extract your data.  Our support team can assist your company in this data extraction from STDF generated data logs using GDF record types.

  • Frequency Shaped Isotropic Electric Probes

    PI-SH-FCC, PI-SH-ICNIRP - EMC Test Design, LLC

    An isotropic electric field probe with shaped frequency response meeting the ICNIRP or FCC RF safety standards for occupational and general public exposure limits (see the specified frequency ranges below). Meter readings are shown in % of the STD – standard reference level, eliminating the need to know the source frequency. Probe output is proportional to RF power density in the whole specified power range, producing the correct RF power measurements in single and multi-signal environments, typically present at multiple antenna sites.

  • Automated Systems

    Tinius Olsen

    At Tinius Olsen we have taken a fresh look at how our customers use materials testing machines and software to meet their specific needs in today’s commercial environment. Accuracy, resolution, data rates, control, precise adherence to test standards, calibration, measurement of uncertainty and traceability are all essential parameters tuned to the highest standards and capabilities in Tinius Olsen testing machines and software. We can configure an automated system to match your exact requirements, saving time and making you money.

  • LED Optical Aging Test Instrument

    LEDLM-80PL - Lisun Electronics Inc.

    LEDLM-80PL LED Lumen Maintenance and Aging Life Test System is designed according to standards of IES-LM-80, IES-LM-82, TM-21 and GB2312-80, and the software is developed base on Arrhenius model. LED has the features of long life, but with the different working condition and drive current, its life will be different, but generally the life will be around 50K hours. Differ from the traditional lightsource, LED light will decay gradually rather than extinguish instantly, so in the standard of LM-80, it introduces L70, L50 and etc.

  • Handheld Gigabit Ethernet Tester

    GAO-ENET-101 - GAO Tek Inc.

    GAOTek’s Handheld Gigabit Ethernet Tester is designed and manufactured for 1 Gigabit Ethernet network deployment and comprehensive test. The compact design, user-friendly interface with high-resolution color touchscreen makes this device compatible for indoor laboratory and outdoor field environment. It can fully meet Ethernet standard, support the latest version of ITU-T, Y.1564, IETF RFC2544, IETF RFC3393, IEEE 802.3, IEEE802.1 standards or recommendations and so on. Support comprehensive Ethernet test functions from installation and commission to operation and maintenance.

  • PCIe Compliance Testing

    Teledyne LeCroy

    Teledyne LeCroy offers an integrated and automated compliance testing system, approved by the PCI-SIG as a standard tool for Link and Transaction Layer Compliance testing for developers working with the PCIe 4.0 and PCIe 5.0 specification. This solution combines a Summit Z58 or Summit Z516 Exerciser and a PCI Express Test Platform (for testing End-Point devices) This system has been selected by the PCI-SIG as a standard test tool for PCI Express 4.0 and PCI Express 5.0 Link and Transaction Layer Compliance Testing.

Get Help