Showing results: 421 - 435 of 1055 items found.
-
LRGAS-100, -200, -300 -
TEK-VAC INDUSTRIES Inc.
Complete with RGA sensor, software, & electronics, vacuum pumping system, and mobile cart.Variety of sampling fittings.Automatic pump down.100, 200, or 300 amu sensor.Standard model contains an 80 L/s turbo pumping system with stainless steel manifold.Small footprint.Plugs into a common 120 VAC power outlet.Full front panel control.
-
PCI395 -
AcQ Inducom
The PCI395 features 16 analog voltage outputs, integrated on the factory standard, ANSI certified M-module standard. Each output has a 12- or 16-bit resolution and a software programmable output range (0..+10V or -10..+10V). Control of the analog output is as easy as writing the binary equivalent to a dedicated register (per channel).
-
GT-1A -
CMG
The GT-1A airborne gravimeter brings proven design and fully automatic operation to mobile scalar gravity measurement. Intelligent Platform Control combined with continuously recorded wide dynamic range allows the collection of high quality data through periods of turbulence. Proprietary software provides on-side delta-g values for post-flight evaluation.
-
Skylink Microwave
Skylink SSPAs incorporate state-of-art DPD and well-done Heat Dissipation technologies with available LDMOS, GaN & GaAs Chips. Solutions of SSPA frequency range from 9kHz to 50GHz and output power up to kilowatts and includes basic PA modules to integrated chassis with embedded software for local and remote control and monitoring.
-
Chroma Systems Solutions, Inc.
This auto test system uses the unique test command optimization technology to prevent the repeating control commands from sending to the system hardware devices. This improves the system test speed dramatically and makes Chroma 8000, which uses open software architecture, highly efficient as a close or optimized auto test system.
-
MTI Instruments
Front USB port enables easy storage of measurements and other data to flash drivesMTI Instruments’ Proprietary Capacitance Circuitry for Outstanding Accuracy and DependabilityNon-contact measurements76-300 mm diameter wafer rangeOptional wafer measurement ringsWafer stops for exact centeringEthernet interfaceFull remote control software (Windows compatible)Optional calibration wafers
-
Keysight Technologies
Keysight’s bit error ratio test (BERT) system enables the most accurate physical-layer design verification of high-speed communication and multi-gigabit digital interfaces. Our expert-level support will help you select the high-performance hardware, control software, receiver test, and automation tools needed to help you master your design.
-
34461A -
Keysight Technologies
Color, graphical display with built-in bar chart, histogram, trend, math, and statisticsI/O: USB, LAN/LXI, GPIB (optional)BenchVue software enabled: Do more with your PC and instrument together, no programming required. Easily control your DMM, quickly build automated tests, log measurements and save precious time.
-
MKS Instruments
As innovators in programmable control, communication protocols, embedded analytics, and gateway technology, MKS has the critical building blocks and experience to deliver the latest technologies for distributed automation control and process monitoring to our customers, personalized for their exact requirements. We offer a complete Automation Platform solution along with a suite of Automation Control hardware and software configurable modules that allow semiconductor and other industrial manufacturing customers to better automate their processes through computer-controlled automation and seamlessly integrate with existing MKS products to provide a complete solution. Our expertise in control technology enables manufacturers worldwide to operate with greater productivity and streamlined efficiency. MKS works closely with our customers to provide proven, real time solutions that save time and money, reduce inefficiencies and enable faster implementation.
-
B&W Tek, Inc.
We offer a full suite of software for spectroscopic data collection and analysis designed for users at all levels, and varying applications. Our standard BWSpec® spectral data acquisition software allows for easy collection of data from our Raman systems and modular spectrometers. It includes tools for instrument control for data collection and spectral manipulation. The raw data and corrected data are stored and can be easily viewed. Data manipulation tools include smoothing, baseline correction and derivatives. Data can be saved in different formats for use in additional application software. For spectral identification against Raman spectral libraries with a simple interface for immediate identification for verification with a pass/fail result, our BWID® software provides qualitative analysis. Users of BWID software can create their own Raman spectral libraries, or select from our numerous ready to use libraries. For identification with portable Raman in regulated environments, the US FDA 21 CFR part 11- complaint version of BWID can be used. B&W Tek’s unique see-through identification using the STRam® can also be done using the BWID software operating on the embedded tablet computer of the STRam system. For quantitative analysis, data collected with BWSpec or other packages can be imported into the BWIQ® multivariate data analysis software, offering a full suite of data preprocessing, regression and classification analysis algorithms. PLS regression models from the BWIQ software an be used in rel-time in our BWAnalyst software, for use with the QTRam , as well as in Metrohm’s Vision® software. The i-Raman series portable Raman instruments can also be operated for single acquisition, or for real-time analysis in the Routine Analysis mode of the Vision software.
-
SICK Sensor Intelligence
SICK's safety controllers provide a simple, flexible, and scalable solution to realize an intelligent machine design. Flexi safety controllers feature a modular hardware platform without the use of complex software. They are simple to operate and can be easily integrated with all safety control components. Their compact design makes these safety controllers ideal for a variety of applications.
-
MS Series -
Dow-Key Mircowave Corporation
The MS-series is a switch solution populated with individual switches to allow the user to control multiple coaxial switches easily through software. It gives the user the flexibility to add as many switches as needed (limited to the size of the enclosure) on the rear panel or inside the box starting with a 19” 1RU chassis up to 4RU (and larger enclosures for custom designs).
-
Unigraf Oy
The first integrated test equipment for testing DP Alt Mode in USB Type-C sinks and sources. UCD-340 features a flexible and robust way of testing video, audio and power delivery functions of USB‑C. The provided software enables user access to the vital parameters and controls needed when evaluating the various functions of the interface.
-
Amida Technology, Inc.
The design of the GPIB control card is fully compatible with the IEEE 488.1 and IEEE 488.2 standards, using the PCI interface, supporting the Plug & Play specification, and supporting Windows 95/98/Me /NT4.0/ 2000 /XP/7 Operating system, driver function library includes Windows development software tools such as Visual C++, Borland C++ Builder, Labwindows, Visual Basic, Delphi and Labview. This GPIB-supported library provides an NI-like command control syntax format, which is convenient for users to develop and transfer applications smoothly. This interface card also provides a conversational window GPIB interface program, which is convenient for users to directly control the instrument without writing a program.
-
FLIR A50/A70 Image Streaming -
Teledyne FLIR
FLIR A50 and A70 Thermal Image Streaming Cameras are the right choice for users who want camera control capabilities and image streaming over Ethernet, as well as flexibility to perform analytics and raw data collection on thermal characteristics using preferred software applications. With options for Wi-Fi, an integrated visual camera, compressed radiometric image streaming, and ONVIF S compatibility, these small and lightweight fixed-focus automation cameras will optimize process control and quality assurance to improve yield, product quality, through-put time, and lower costs.
