Filter Results By:

Products

Applications

Manufacturers

Measurement

an acertained value.

See Also: Metrology, Sensors, Meters, Stability


Showing recent results 8056 - 8070 of 8725 products found.

  • FC(Fuel Cell) Impedance Meter (up to 5A)

    KFM2005 - Kikusui Electronics Corp.

    The impedance meter KFM2005 is designed for testing of the fuel cell with the small current (5 A or less), and not only the current-voltage characteristic test, the KFM2005 can easily measure for the impedance of a fuel cell using the AC impedance method, and the Cole-Cole plot. Using the measurement data of the Cole-cole plot, it is possible to calculate the circuit constant of the approximate equivalent circuit of the fuel cell. The built-in DC load (60W) is capable to operate from 0 V, and it can perform the test for the fuel cell up to 20V and 5A.

  • Transducers

    Daytronic Corporation

    high-stability long- and short-stroke LVDT's for fast, reliable measurement of linear displacement in gaging, automatic inspection, and process control applicationsplus strain gage load cells for weight, torque, tension, and other mechanical forces; strain gage pressure transducers for gage, absolute, and differential pressure; a piezoelectric accelerometer for use in vibration testing; and a magnetic pickup for measuring the frequency of mechanical rotary motion.

  • PXI Strain/Bridge Input Module

    National Instruments

    PXI Strain/Bridge Input Modules feature up to eightchannels that support quarter-, half-, or full-bridge sensors at speeds up to 102.4kS/s. The modules provide increased accuracy, high data throughput, and a range of synchronization features. Optional features include remote sensing, internal bridge completion, and shunt calibration options per channel. PXI Strain/Bridge Input Modules are ideal for dynamic strain, load and pressure measurements, and test cell installations requiring accuracy and flexibility.

  • Structural Load Monitoring

    SLM - Integrated Test + Measurement

    Since 2001 ITM has installed structural strain based monitoring systems in the pulp & paper and energy generation industries. For these systems, our engineers and field service technicians turn structures into measurement instruments (load cells). Load outputs from the structural load cells are monitored and published by a realtime controller to its local interface or network historians and HMIs.

  • MTS-50 Meter Test System

    MTS-50 - Kongter Test & Measurement Co., Limited

    K-3986 is not only a battery charger or load unit for battery String. It is comprehensive unit with one-stop-solution for battery maintenance. With charging and discharging for the same battery string, it will greatly simplify your maintenance for batteries. Extra functions like wireless online monitoring and battery activation will enable you to know your batteries comprehensively. With optional DAC, you could also have a real time monitor for the whole process of measurement. For charge and discharge of single cell, we also have BCD-3932T Battery Charger/Discharger.

  • VPG Weighing and Controlling Systems

    Vishay Precision Group

    The Weighing and Control Systems segment designs and manufactures complete systems comprised of load cells and instrumentation for weighing and force control/measurement for a variety of uses, include on-board weighing and overload monitoring systems. Typical applications for our Weighing and Control Systems products are process weighing of chemicals, food and pharmaceuticals; aircraft and truck weighing and overload protection; weight force and process optimization in steel and paper mills; and force measurement for offshore oil and gas exploration.

  • FC Impedance Meters

    Kikusui Electronics Corp.

    designed for testing of the fuel cell with the small current (5 A or less), and not only the current-voltage characteristic test, the KFM2005 can easily measure for the impedance of a fuel cell using the AC impedance method, and the Cole-Cole plot. Using the measurement data of the Cole-cole plot, it is possible to calculate the circuit constant of the approximate equivalent circuit of the fuel cell. The built-in DC load (60W) is capable to operate from 0 V, and it can perform the test for the fuel cell up to 20V and 5A.

  • Motorized Test Stand with PC Control

    35-10 - Testing Machines, Inc.

    The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

  • Sandwich Load Cells

    2525 Series - Instron

    Load cells are an integral part of the force measurement system of a testing machine. Their interchangeability along with transducer recognition and single point electrical calibration makes them easy to use. They maintain high alignment and are resistant to offset loading throughout the test, even with large sized specimens. Instron controls the design, manufacture and quality of all load cells, with customer applications in mind. They are certified in accordance with international standards for use in material testing machines only.

  • Vector Network Analyzers

    AEA Technology Inc.

    The VIA Bravo is a handheld Vector Impedance Analyzer for measuring the impedance and resonant frequencies of circuits and antennas. The VIA Bravo has the capability of providing accurate measurements and sweep displays of impedance, reactance, resistance, phase angle, return loss and SWR. The VIA Bravo’s testing functionality, combined with its 100 kHz to 200 MHz frequency range, make it a versatile tool for many service applications including areas such as MRI, wireless telemetry, 2-way radio, aviation, and Radio Frequency Identification (RFID).

  • VXT PXIe Vector Transceiver

    M9421A - Keysight Technologies

    Purpose-built for rapid solution creation and faster throughput in manufacturing test of wireless components, power amplifiers, and RF front-end modulesIncrease test density and reduce your footprint with up to four VXT instruments in one 18-slot chassisReduce development time with open-source test libraries and reference solutionsStart closer to your finish line with built-in FPGA-accelerated measurementsOptimize test routines using proven software for noise figure and standard-specific measurements

  • 3 GHz RF/IF Sentinel Intelligent Signal Scanning Portable Recorder

    Talon RTR 2613 - Pentek, Inc.

    The Talon® RTR 2613 combines Pentek’s Sentinel Intelligent Signal Scanning software with real-time recording in a lightweight, portable and rugged package. The RTR 2613 provides SIGINT engineers the ability to scan the 3 GHz spectrum for signals of interest and monitor or record bandwidths up to 40 MHz wide once a signal band of interest is detected. The RTR 2613 recorder is a grab-and-go recorder suitable for test & measurement, mobile military, security and government intelligence (SIGINT, COMINT and ELINT) applications.

  • GSM RF Interference Test System

    Guangzhou Jumho Electric Co., Ltd.

    Cell phones and other wireless devices radiate powerful electromagnetic fields that can cause interference and noise in microphone signals. The interference and noise is called RF interference, which is an unwanted “signal” that occurs at the same time and frequency as a data signal. The RF interference disrupts the flow of data and degrades quality-of-service. Jumho Electric provides a cost-effective RF interference test system for GSM interference level measurement of wireless microphone.

  • IC-CAP Device Modeling Software

    Keysight Technologies

    Integrated Circuit Characterization and Analysis Program (IC-CAP) is the industry standard for DC and RF semiconductor device modeling. IC-CAP extracts accurate compact models used in high speed/digital, analog and power RF applications. Today's most advanced semiconductor foundries and IDMs rely on IC-CAP for modeling silicon CMOS, Bipolar, compound gallium arsenide (GaAs), gallium nitride (GaN) and many other device technologies. IC-CAP is the most advanced, customizable modeling software and includes measurement, simulation, optimization and statistical analysis tools.

  • UltraCMOS SP6T RF Switch

    PE42562 - pSemi Corp.

    The PE42562 is a HaRP™ technology-enhanced absorptive SP6T RF switch that supports a frequency range from 9 kHz to 8 GHz. An external VSS pin is available for bypassing the internal negative voltage generator in order for the PE42562 to deliver spur-free performance. It delivers high isolation, low insertion loss and fast switching time, making this device ideal for filter bank switching and RF signal routing in test and measurement (T&M) and wireless applications up to 8 GHz. No blocking capacitors are required if DC voltage is not present on the RF ports.