Filter Results By:
Products
Applications
Manufacturers
-
product
High Accuracy Spectrophotocolorimeter
LMS-3000
• Measure and display the relative spectral power distribution (UV-VIS-NIR) P(λ), chromaticity coordinate, correlated color temperature, rending index, color difference, peak wavelength, luminous flux, luminous flux efficiency and photometry parameters of light source and light material under the control of general PC. • Automatically adjust high-voltage, it not only shortens the measurement time, but also reduces the wear and tear of the instrument • Simultaneously measure the temperature in both environment and integrating sphere to make the data more visually and reliably • Figure of chroma and color difference in test report can be exchanged freely • Color display and print. The relative spectral power distribution (UV-VIS-NIR) P(λ), reports both in English. RS-232-C interface, compatible with all kinds of computer • LSP-500 AC Power source PC RS-232-C interface. compatible with all kinds of computer • Range of wavelength: 380nm～780nm(Special:200nm～780nm) • Accuracy of wavelength: ±0.2nm • Repeatability of wavelength: ±0.1nm • Accuracy of chromaticity coordinate: ±0.0003(under standard illuminate A) • Spectrum sample interval: 5nm(Special order:1nm) • Luminosity linearity: 0.3% • Accuracy of luminosity: 1 class • Correlated color temperature measure range: 1500K～25000K • Accuracy of CCT: ±0.3%(under standard illuminate A) • Accuracy of rending index: ±(0.3%rd±0.3) • Environment temperature measure range: -10℃～80℃ • Temperature measure range(In sphere): -10℃～100℃
-
product
Goniophotometer
A device used for measurement of the light emitted from an object at different angles
-
product
DC Electronic Load
M9822/M9822B
M9822/M9822B is newly designed circuit adopts rapid AD and DA technology to achieve rapid measurements with high accuracy. And the resolution of 0.1mV/0.1mA can effectively display the minor change of voltage and current, so the instrument has a wider application field and achieves better test results. Meanwhile your operation becomes much more comfortable and easy by equipping the high-light VFD, the simple menu and displayed contents and the operation state indicators on all keys. Otherwise the complete and humanized test functions will greatly improve your productivity.
-
product
Rotation Luminaire Goniospectroradiometer
LSG-1800CCD
LSG-1800CCD/LSG-1700CCD Goniospectroradiometer is an automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800CCD can do the spatial CCT test when do the intensity distribution test. It is for industrial laboratory measurements the photometric data of luminaires such as LED luminaries, HID lamps, fluorescent lamps and so on.
-
product
EFT Immunity Measurement
EFT61000-4
EFT immunity tester EFT61000-4 is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement. They have fine performance, such as high stability, high reliability, easy to use etc. It meets the standard requirements of IEC 61000-4-4, EN 61000-4-4, GB/T17215.301, GB/T17215.322 and GB/T17626.4. EFT61000-4 has LCD display in both English and Chinese.
-
product
Voltage Dips and Interruptions Generator
CSS61000-11
The voltage dip and interruptions generator is specially designed according to the characteristics and requirements of EMS measurement under a sudden reduction or interruption of the voltage at a point, CSS61000-11/ CSS61000-11T used a big LCD in both English and Chinese operating interface. They have more fine performance such as high reliability, convenient operation, and full meet the standard requirements of IEC 61000-4-11, EN 61000-4-11 and GB/T17626.11
-
product
GNG-* “Go” and “Not go”gauge
GNG-*
According to the requirement of IEC 60061, Lisun produced high accuracy and high quality “Go” and “Not go” gauge • GNG-E27 is for E27 lamp cap standard source measurement. It includes 7006-27B-1, 7006-28A-1, 7006-27C-1, 7006-50-1, 7006-51A-2, 7006-51-2 • GNG-E27H is for E27 lamp holder standard source measurement. It includes 7006-25A-2, 7006-26-4, 7006-21-5, 7006-22A-4, 7006-22B-1, 7006-22C-1, 7006-22D-1 • GNG-E14 is for E14 lamp cap standard source measurement: 7006-27F-1, 7006-54-2, 7006-27G-1, 7006-55-2 • GNG-E40 is for E40 lamp cap standard source measurement: 7006-27-7, 7006-28D-1, 7006-52-1, 7006-53-1 • GNG-B22D is for B22d lamp cap standard source measurement: 7006-12-8, 7006-15-7, 7006-20-4, 7006-12A-2, 7006-12B-2, 7006-15A-2, 7006-13-5, 7006-17B-1 • GNG-B22DH is for B22d lamp holder standard source measurement: 7006-12A-2, 7006-12B-2, 7006-15A-2, 7005-10-8
-
product
Bluetooth Digital Multimeter
B35
Function as 3 in 1 datalogger = temperature meter.Multi-connectionThe change trend analysis accessible VIA special chart modeVoice warning supported, which assures measurement safetySmart Voice reading accessible6000 count full scale readingLarger display, easier data-reading; simulated bar chart comes as an added option.
-
product
2k/channel Memory Depth Oscilloscope
HDS-1022M
2k/channel memory depth. 3-3/4 digit DMM with datalogger. Manual cursor measurement. Li-ion battery and AC adapter. Extra bright backlight display. Sample rate up to 100MSa/s, 20MHz bandwidth. RS-232, USB port for programming & data transferring
-
product
Cable Tester
KT-96B
Take a new "VECTOR MEASUREMENT" technelogy in measuring the length of the cable. Self calibrating function.Locate the borken point of a cable.With RS232 interface,it can communicate with a PC or μc.A special software is supplied for your computer to connect it to your computer.
-
product
Oscilloscope
YB4365
Panel setup on-screen display,many parameter can be display on CRTdirectly. Cursor measurement,such as ¡÷V,¡÷T,1/¡÷T etc. Sweep rate auto-set. SMT technology,MCU controlled. Switched power supply,line in voltage can vary between 90 to 250V. Build-up frequency counter
-
product
Digital Oscilloscope
HDS1021M
2 in 1(DSO+Multimeter)Autoscale20 automatic measurements Bandwidth: 20MHzSupport USB for data transmission toPC Replaceable li-ion battery back up (6 hours)Dimension: 180mm(L)×15mm(H)×40mm(W)
-
product
4-Terminal Earth Resistance Testers
DY4300
4 pole measurement of earth resistancesoil resistivity measurementLCD backlight
-
product
Digital Multimeter
KT-8302C
3 3/4 digits display, max. reading of 3999Auto range and manual operationTrue RMSCapacitance, Frequency, Continuity, Diode, Temperature,Transistor TestData Hold function, Auto power offDuty cycle measurement: 0.1%~99.9%
-
product
Leakage Current Measurement
SE-05
Digital clamp meter designed for leakage current measurement. Least affected by external stray magnetic field. Four AC current ranges: 400mA/4A/40A/200A
-
product
Portable LCR Meter
KT-2821
Display main parameter and sub-parameter. Test Parameter: L-Q,C-D,R-Q and Z-Q. Display mode:Direct measurement value,absoute deviation,percent deviation
-
product
Digital Multimeter
KT-4000P-2
3 3/4 digit LCD with a maximum reading of 3999. Auto range and Manual Operation. Analog bar graph: 32 segments with measurements 12 times per second. With Capacitance , Frequency test. Over range: "OL" mark indication
-
product
Oscilloscope
RO3102
Dual channel, Bandwidth: 100MHz. Sample Rate (Real-time):400MSa/s on one channel. Equivalent Sampling:up to 50GSa/s. Advance Triggering on edge, pulse, video, delay. 20 Automatic Measurements, Manual Cursor Measurement
-
product
Digital Clamp Meter
KT-2007A
3 1/2 digits with a maximum reading of 1999. ACA & ACV & DCV measurement. Diode & Continuity test. Data hold function. Jaw diameter: ¦Õ28mm(max)
-
product
Cable Length Meter
KT-96CR
Range: 60m / 600m / 6km / 60km(197ft-197,000 ft)Resistance: 600mΩ -- 600ΩAccuracy: ±1.5% reading ±3 digits;Resolution:RES Mode 0.01mΩ Cap Mode 0.01mwire guage: 0~26 (ga).material:Al /CuAuto range;Backlight controlResistance & Capacitance measurementSelf- calibrating function;Use a standard cable or a known length cable to calibrate;Auto save the parameter of the cable;Applicable for any type and any size of cable;Transform resistance of wire and capacitance between two wires to length;4-wire vector measurement, high accuracy and resolution.Unit: m / km; ft
-
product
Digital Oscilloscope
HDS-2602M
20MHz～60MHz Bandwidthup to 250MS/s real time sample rate2 in 1 (Multimeter function support)Dual Input ChannelsAdvanced Trigger FunctionsAutomatic Measurement SupportReplaceable Li-ion Battery Back-upLCD back-light adjustment Support3.8”TFT panel guarantee to read clearly even under hard light
-
product
Digital Clamp Meter
DT-3266L
Measurement method: Dual slope integration technicalReading rate :3 reading/SecPolarity: Automatic ,indicated minus ,assumed plus.Display:LCD 3 1/2 digitsSize :167*55*22mmWeight:135g(including battery)Power :2 size AAA
-
product
Digital Multimeter
KT-8301C
3 3/4 digits display, max. reading of 3999Auto range and manual operationCapacitance, inductance, frequency, continuity, diode, temperature,transistor testAuto power off, Data hold functionDuty cycle measurement: 0.1%~99.9%Power source:RO3 UM4 AA SiZE 1.5Vx2
-
product
Clamp-on Ground Resistance Tester
DY1100
ground resistance measurements from 0.01Ohm to 1000Ohm with 0.01Ohm resolutionSimplifies ground resistance measurements on multiple point ground systemsLong jaw(DY1000) and round jaw(DY1100) to fulfill all requestsDual insulation for protectionVerification resistors confirm accuracy of meter30 record memories(DY1000)
-
product
20MHz 60MHz per Channel Oscilloscope
LDS-20020
LCD display, dual channel. Bandwith 20MHz¡«60MHz per channel. Sample rate up to 400MSa/s. Cursor read-out function, manual cursor measurement. 4 wavegforms, 4 setups storage. 5 automatic measurement functions
-
product
AC/DC Clamp-on Ammeter
KT-3061
Non - intrusive AC and DC current measurement• 1mA resolution• Average responding, RMS calibrated• Auto ranging /Auto zeroing• Data Hold • Low battery indicator• Auto Power Off
-
product
Digital Oscilloscope
HDS-1021
Record length of 6,000 pointsReading-out with the cursorEighteen automatic measurement functionsAutoscale functionColor liquid crystal display of high resolution and high contrastStorage and call-out of waveformsAutomatic setting function provided capable of fast settingImplementation of detecting the average and peak values of the waveformEdge and video triggering functionUSB communication portMultipe Language User Interface
-
product
Oscilloscope
YB4365l
Set up OSD, Multi Para Char Display. Cursor measurement£¬¡÷V, ¡÷T, 1/¡÷T. Auto set sweep speed. SMT technolegy. Switch Power Supply , 90-260V
-
product
Auto Range DMM
KT-8301B
3 3/4 digits display, max. reading of 3999Auto range and manual operationCapacitance, Inductance, Frequency, Continuity, Diode, Transistor TestData Hold function, Auto power offDuty cycle measurement: 0.1%~99.9%Power source: RO3 UM4 AA SIZE 1.5Vx2
-
product
Battery Analyzer with Capacity & Impedance Measurement
SE-1005A
Range: 60mΩ / 600mΩ / 6 Ω / 60Ω (auto-range)Accuracy: ±1.0% of reading ±3digits Resolution: 0.01mΩDCV Range: 6V / 60V (auto-range) Accuracy: ±0.8% of reading ±3digits Resolution: 0.001VDCARange: 60AAccuracy: ±1.0% of reading ±3digits Resolution: 0.01ACapacityRange: 999.99AhAccuracy: ±1.5% of reading ±3digits Resolution: 0.01AhDischarge load:24Ω;
