Filter Results By:
Products
Applications
Manufacturers
-
product
Portable gear inspection- and 3D-measuring systems
ultimate independent measurement - on the production machine or on the shop-floor without rotary table
-
product
Portable heat flux sensor, with read-out unit
HF03 / LI19
Hukseflux Thermal Sensors B.V.
The HF03 is a heat flux sensor that can be used in mobile applications. It is combined with LI19, a high accuracy hand-held read-out unit that can be used both for mobile measurements and as an amplifier directly connected to a PC. The combination HF03 / LI19 is typically used to study heat flux levels around flares and fires, and to calibrate flare radiation monitors / flare heat flux sensors.
-
product
Portable High-Current Test Set
PI-250B
The PI-250B Portable Current Power Supply provides unequaled capability in a portable package. The PI-250B generates continuous current of 250 amps with peak maximum output 750 amps through a breaker and 1000 amps into a short, all on 120 VAC supplies. The unit weighs no more than 35 pounds, allowing easy mobility. Basic operation is very simple, and the proven instrumentation provides optimal output control and measurement.
-
product
Portable LFG Analyzer
GA5000
The GA5000 is our landfill and contaminated land portable gas analyzer, with available gas measurements of CH4, CO2, O2, H2S and CO. It’s easy to use and calibrate and will help standardize your monitoring routines while supporting environmental compliance.
-
product
Portable Luxmeter
HD2102.1
Portable handheld luxmeter for measuring illuminance, luminance, PAR, irradiance (across VIS-NIR, UVA, UVB and UVC spectral regions or measurement of irradiance effective according to the UV action curve).
-
product
Portable Manual Probing Station
Model W4.0 x L6.5
This portable manual probing station is designed for a versatile, comfortable, and accurate operation on up to 4.0” wafers or 4.0” X 6.5” printed circuit board assemblies. This turn-key, manually operated probing station, model W4.0 x L6.5, is part of the D-COAX commitment to the test and measurement and PCB fabrication industries.
-
product
Portable Measurement Solution
MOSS model
Its pragmatic design means it is practical and simple to use, its adaptable multi-sensor functionality gives you the freedom to develop your own Marine Operation Survey and Monitoring solutions.Some basic examples are:Inclining experimentsFreeboard measurementSalvage survey and monitoringDry docking operationsField pressure testingAny field operations...
-
product
Portable Measuring Complexes
K-5101
K-5101 is a family of multichannel, computerized measuring complexes created using the technology of virtual instruments and based on the computing capabilities of modern computers and measuring technologies of the National Instruments company. Since all the main measurement functions are implemented by software - the basic parameters of virtual devices that make up the complex are chosen taking into account the specific wishes of the customer.
-
product
Portable Metrology‑Grade 3D Scanner
Black Series
The HandySCAN 3D | BLACK Series delivers accurate, high-resolution and repeatable results, regardless of the measurement setup quality and no matter the user experience. Featuring dynamic referencing, both the scanner and part can move during measurement and still provide an accurate and high‑quality scan.
-
product
Portable Milliohmmeter
AX6000
The right solution for bonding resistance measurement according to all current aircraft specifications on plane, helicopter, rocket, army vehicles for both production and maintenance.A very easy-to-use and versatile instrument, for applications requiring up to 10 A measurement current.
-
product
Portable Neutron, Gamma, Scintillation and Alpha-Beta Silicon Survey Meters
NHJ2: Multiple rays measurement, Excellent practicability and Long-life detector. NHC: Environmental level dose measurement, SCA mode, Excellent practicability and Energy/Temperature compensation. NHL: High Sensitivity, Wide Range Measurement, Compact and Lightweight, Easy Operation with Single Hand.
-
product
Portable optical DO meter
ARO-PR
The Portable optical DO meter makes use of the fast-response optical DO sensor RINKO, maintaining its high-speed response performance (99% response < 7sec). The meter probe is equipped with a temperature sensor close to the sensing foil, and the measurements are made by simply inserting the probe into a DO sample bottle (the calibration is carried out using the National Metrology Institute of Japan (NMIJ) certified traceable gases standards). Differently from galvanic electrode sensors, the instrument does not require water sample stirring or fixing reagents, since there is no oxygen consumption. Thus, the required time to estimate dissolved oxygen is considerably reduced. The display unit shows the output instantaneously, and you can check the measured values in real time.
-
product
Portable Oscilloscopes With Isolated Channels
Portable oscilloscope with 2 isolated channels, 600 V CAT III, 20 MHz bandwidth, 2 GS/s ETS, double 8,000-count multimeter with power measurements, 31-order harmonics with 40 to 450 Hz fund.,colour screen, USB.
-
product
Portable Paperless Recorder
5.7” Colour TFT LCD (320 x 240) with Backlight8 Input Temperature Measurement / Logging (ºC/ºF )Colour Graphic Display of 8 Curves at the same timeDigital & Analog (bargraph) Data DisplaySelection of 11 Types of Thermocouple (K, J, E, T, R, S, N,..)Easy Socket for Thermocouple Mini ConnectorBasic Accuracy 0.05 % ± 1ºC (K Type)28 Hours Recording with Lithium Battery of 3400 mAHStatistics Data (Histogram) for easy AnalysisProgrammable Hi-Lo Alarm with TimerDisplay of Max & Min Values for each InputSampling Rate 8 Inputs / 1 SecondHide or Display Selected CurvesStandard 2G SD Memory Card (Stores 3.8 Year of Data)SD Card Directly Read by PCRead & Delete Data files DirectlyBuilt-in Calendar ClockAccept Analog Outputs from InstrumentsScreen Hardcopy for Easy Documentation Ready to Use Package ( Thermocouples, SD Card & Battery)
-
product
Portable Parallel Analyzer
SL1000
Perform up to four colorimetric and two probe-based measurements in parallel, and complete the entire test suite in 25% of the time. Complete more tests on site, get the results you need faster, and visit more sites in each shift.
-
product
PORTABLE PRESSURE MAPPING
I-SCAN® HANDHELD SYSTEM
Handheld pressure measurement system for collecting tactile pressure data.
-
product
Portable Solar Reflectometer
CONDOR
Condor is a portable reflectometer designed for field measurement of reflectivity in the solar field in less than 10 seconds with a high accuracy and precision. It can be applied to both flat and curved reflecting surfaces of up to 4 mm thickness.
-
product
Portable Spectrometers
*Quick search and detection of gamma radiation sources with radionuclide identification*Measurement of gamma radiation ambient dose equivalent rate
-
product
Portable Spectrophotometer
CHECK 3
CHECK 3 offers excellent correlation to Datacolor’s world-renowned bench top spectrophotometers. It shares the same high-accuracy SP2000 spectrometer as our reference grade Datacolor 800 benchtop instrument. For each measurement, from vendor to customer and throughout the entire supply chain, you can count on the CHECK3 for highly accurate color data.
-
product
Portable Stroboscopes
Monarch Instrument has been manufacturing Stroboscopes for visual inspection and speed measurement for over 35 years. We are recognized as the leading manufacturer of portable hand held stroboscopes. We have xenon flash tube and LED versions available in a variety of different models to suit your application requirements.
-
product
Portable Surface Resistivity Meter
262
LEGGE?s 262 Surface Resisitivity Meter is a simple to use, highly repeatable measuring device, for determining the surface resistivity of materials. The 262 incorporates a revolutionary 3 - point probe measuring technique, enabling accurate, consistent and repeatable surface resistivity measurements. Provided with fully rechargeable nickel cadmium battery installed
-
product
Portable Temperature Monitor
PTM1
The Model PTM1 is a high performance, precision hand-held instrument for the measurement of temperature using Physitemp’s Type T (copper-constantan) thermocouples (will also accept J & K). This versatile instrument measures temperature in both °C and °F. The internal memory of the microcomputer stores the minimum and maximum measured temperature range for instant recall via the LCD display.
-
product
Portable Three-Phase Current Load
EE-120A-3
The Current Source is able to generate three-phase currents, synchronized with the service voltage, with unprecedented stability and measurement accuracy. The amplitude and phase-shift of each current is individually adjustable. The values of voltage, current, power, power factor, phase shift, THD and frequency are indicated on the LCD display.
-
product
Portable Three-Phase Phantom Load
EE-120A-3 + EE-500V-3
The Phantom Load is able to generate three-phase voltages and currents with unprecedented stability and measurement accuracy. The amplitude and phase-shift of each current and voltage is individually adjustable. The generated values of voltage, current, power, power factor, phase shift, THD and frequency are indicated on the LCD display.
-
product
Portable Ultrasonic Flowmeter
PORTAFLOW 220/330
The Portaflow range brings simplicity to thenon-invasive measurement of liquid flow. Portaflow offers the user quick and accurate flow measurement with its easy to follow menu and simple set up. Results can be achieved within minutes of opening the case. Compact, rugged and reliable, the Portaflow range has been designed to provide sustained performance in industrial environments.
-
product
Portable Units
The basic version for mobile conductivity measurement. It is a robust and intuitive portable device for routine daily measurements in laboratories and processes. Over 1,000 operating hours with a single set of batteries (4x AA).
-
product
Positional Current Probe, PCB Track Touch And Measure
I-prober 520
Current measurement from insulated probing of conductorSuitable for observation and measurement of current in PCB tracks, component leads and ground planesWide dynamic range of 10mA to 20A peak to peakWide bandwidth of DC to 5MHzLow noise figure equivalent to <6mA rms at full B/WSafety rated to 300V Cat II (600V Cat 1)Suitable for connection to any oscilloscopeHigh accuracy general purpose H-field probeConverts to 'closed magnetic circuit' current probe
-
product
Positive Displacement Meter
The Blancett positive displacement flow meter provides high measurement accuracy for fluids over a wide viscosity range. Applications include lubricants, fuels, chemicals and solvents, oils and greases. With only 2 moving parts, the positive displacement meter offers trouble free operation and long service life. The meter is bi-directional and it has an extremely large turndown ratio, up to 400:1 in some models - with full accuracy at extremely low flow rates.
-
product
Power Amplifier
2734
The 2734 is a compact class D power amplifier, intended for acoustical measurements in the field or laboratory. All controls and connectors are placed on the front panel, enabling you to set up the 2734 very quickly, and to operate it in horizontal or vertical position. The 2734 is built into a robust flight case making it safe and easy to carry along.
-
product
Power Analyzer
PW3390
The PW3390 delivers 4 input channels and ±0.04% basic accuracy for power - the top instrument in its class. Achieve more precise measurements of the power and efficiency of high efficiency equipment used in power electronics. Further, a 200 kHz measurement band and flat amplitude and phase characteristics up to high frequencies enable the precise measurement of power at top frequency levels and low power factor.
