Showing results: 16 - 30 of 108 items found.
-
Module Laminator-H -
Synopsys, Inc.
1. Model: BSL2236OAC-H2. Effective lamination area: 2200mm × 3600mm3. Dimensions: length 17410mm × width 3665mm × height 2164mm4. Heating method: heat conduction oil heating5. Compressed air source pressure: 0.6~0.8MPa6. Working vacuum degree: 100~40Pa7. Evacuation rate: 70L/S8. Temperature control accuracy: ±1.5°C9. Temperature control range: room temperature - 180°C10. Temperature uniformity: effective lamination area≤±2℃11. Lamination chamber height: 30mm12. Evacuation time: depending on the process, it is recommended to take 5 to 8 minutes13. Upper cover stroke: 300mm
-
-
FCT-650 -
Sinton Instruments
Advanced analysis of solar cells including light I-V and Suns-Voc data.
-
VS6825 -
Industrial Vision Technology Pte Ltd.
The VS-6825A I-V test system is tailored for high-efficiency Solar cell production lines. It is able to eliminate the impact of HJT/IBC/TOPCON’s high capacitance characteristics on measurement results.
-
VS6821 -
Industrial Vision Technology Pte Ltd.
This system provides cell manufactures and laboratories a new way in testing and measuring photovoltaic cells. Integrated with Steady-State Solar Simulator, it provides complete coverage of testing parameters and measurement requirements by most international standards. Its test methods, procedure & equipment are IEC 60904 compliant. Calibration of reference cell is performed at Fraunhofer ISE in Germany, and is traceable to PTB.
-
Laminator - Three Chambers -
Qinhuangdao Boostsolar Photovoltaic Equipment Co., Ltd
1. Effective lamination area : 2400mm × 4500mm2. Dimensions: see outline drawing3. Heating method: heat conduction oil heating (63KW heating station)4. Compressed air source pressure : 0.6 ~ 0.8MPa5. Working vacuum degree: 100 ~ 40Pa6. Evacuation rate: (according to vacuum pump)7. Temperature control accuracy: ±1.5°C8. Temperature control range: room temperature - 180°C9. Temperature uniformity: effective lamination area ≤ ± 2 ℃10. Lamination cavity height: 30mm11. Evacuation time: depending on the process, it is recommended to take 5 to 8 minutes12. Upper cover stroke: 300mm13. Cooling power: 20KW
-
Laminator-Ⅲ -
Qinhuangdao Boostsolar Photovoltaic Equipment Co., Ltd
1. Effective lamination area: 2200mm × 3600mm2. Dimensions: length 12380mm × width 3665mm × height 2164mm3. Heating method: heat conduction oil heating4. Compressed air source pressure: 0.6~0.8MPa5. Working vacuum degree: 100~40Pa6. Evacuation rate: 70L/S7. Temperature control accuracy: ±1.5°C8. Temperature control range: room temperature - 180°C9. Temperature uniformity: effective lamination area ≤±2°C10. Lamination cavity height: 30mm11. Evacuation time: depending on the process, it is recommended to be 5 to 8 minutes12. Upper cover stroke: 300mm
-
Laminator-H -
Qinhuangdao Boostsolar Photovoltaic Equipment Co., Ltd
1. Model: BSL2236OAC-H2. Effective lamination area: 2200mm × 3600mm3. Dimensions: length 17410mm × width 3665mm × height 2164mm4. Heating method: heat conduction oil heating5. Compressed air source pressure: 0.6~0.8MPa6. Working vacuum degree: 100~40Pa7. Evacuation rate: 70L/S8. Temperature control accuracy: ±1.5°C9. Temperature control range: room temperature - 180°C10. Temperature uniformity: effective lamination area≤±2℃11. Lamination chamber height: 30mm12. Evacuation time: depending on the process, it is recommended to take 5 to 8 minutes13. Upper cover stroke: 300mm
-
FCT-750 -
Sinton Instruments
In-line, light I-V and Suns-Voc measurements in a single flash at 2400 units per hour. Capability to accurately measure high-efficiency conventional or backside-contact solar cells.
-
Qinhuangdao Boostsolar Photovoltaic Equipment Co., Ltd
■ The production line is an overall assembly line for solar cell modules, which is suitable for the production of different modules such as 160W~280W, with a wide range of applications and a high degree of automation. ■ Unique structural design, no need to adjust the wire body a lot when changing product specifications, just adjust the program, saving working time. ■ The transmission unit adopts PU synchronous belt transmission, which has the characteristics of stable transmission , strong vibration absorption, low noise and long life, avoiding displacement and ensuring safe transmission.
-
7213-AD -
Chroma ATE Inc.
Defects causes by back-side printing process of C-Si PV cells will also cause performance, reliability impact. Among all the back-side printing defects, bumps caused by improper printing may cause high cell breakage rate during lamination of c-Si module process.
-
7212-HS -
Chroma ATE Inc.
Chroma 7212-HS is a linescan AOI inspector used to provide superior PV cells defect inspection. As the fine grid printing process goes even faster than before, a reliable printing quality inspector is inevitable to reduce the cost during the PV cells metallization.
-
Freese Enterprises Inc.
Freese Enterprises (FEI) can create custom solar/photovoltaic test equipment using the various types of PV test and measurement instrumentation from our industry leading partners such as Agilent Technologies.
-
EL Imaging Tester -
OAI
EL Testing for Si Solar Cells using High Performance CCD. The determination of luminescence (photo emissions) in solar cells is an important characterization tool. Typical solar cells often have defects which limit the efficiency or lifetime of a cell. Many of these defects are visualized with Luminescence Imaging. By using this technique, the manufacturing process can be optimized to produce better cells. Luminescence Imaging takes advantage of the radiative inter-band recombination of excited charge carriers in solar cells. The emitted photons can be captured with a sensitive CCD camera to obtain an image of the distribution of the radiative recombination in the cell. This distribution is determined by the local excitation level, allowing the detection of electrical losses, thus mapping the diffusion length of minority carriers as the emitted light is low intensity and in the near infra-red range, the CCD camera has a high sensitivity wavelength from 900 to 1100 nm with little thermal noise. This CCD camera provides excellent resolution of 1024 x 1024 pixels with a large 1μm pixel size, multi-megahertz readout speed, and robust USB 2.0 connectivity. The EL CCD Camera is the ultimate high-performance CCD camera for electroluminescence and photoluminescence imaging for Photovoltaic (PV) Cells and Modules. This camera combines low noise electronics and optimal sensitivity in NIR.
-
VS6841 -
Industrial Vision Technology Pte Ltd.
This luminescence Analyzer integrates a Photoluminescence (PL), Electroluminescence (EL) , and I-V Measurement Technology, has a Device’s PL image, EL image, as well Device’s I-V characteristics in One system. It is being using to quantitatively map Minority-Carrier Lifetime, and to characterize the defect of silicon wafer & solar wafer, and measure the key parameters from solar cell I-V Curve. It is also a useful tool for scientist to develop other methodology & parameters that can be used as a promising technique for online material monitoring and process control.