-
product
Electrical Tomography
POLARES32
By exploiting an innovative technology based on the use of Alternating Current (AC), the POLARES32 Electrical Tomography can measure and display all the survey parameters at the same time: ground resistivity values, current, voltage, spontaneous potential, induced polarization and indication the quality of the measurement.
-
product
Electrical Impedance Tomography
Electrical Impedance Tomography (EIT) is an imaging technique that visualizes conductivity or impedance distributions both in 2D and in 3D. Sciospec is partnering with world leading scientists in the field to deliver solutions that enable using EIT both in research and in practical applications.
-
product
Electrical Tomography Software
Res2dinv
This very popular software, developped by M.H.Loke, uses the method involving the Sasaki minimum squares inversion (1992) to produce a 2D sub-soil model starting from the data of apparent resistivity (up to 2000 electrodes). It is completely automatic and does not require that the user formulates a starting model. When using a state-of-art computer, the inversion of a single pseudosection will require only a few minutes.RES2DINV supports spreading types like Wenner, Schlumberger, Pole-Pole, Pole-Dipole, line Dipole, equatorial Dipole and other non-conventional spreading types.
-
product
Electrical Tomography Software
Res3dinv
In areas with complex geology, there is no substitute for a fully 3D surveys. The arrays supported include Pole-Pole, Pole-Dipole, inline Dipole-Dipole, equatorial Dipole-Dipole, Wenner-Schlumberger and also non-conventional arrays.RES3DINV uses the smoothness-constrained least squared inversion technique to produce a 3D model of the subsurface starting from the data of apparent resistivity.
-
product
Industrial Computed Tomography
TomoScope® XS
Coordinate measuring machine for three-dimensional measurement utilizing computed tomographyFast measurement with high resolution via the next generation transmission tubeReduce measurement time by 90% with OnTheFly TechnologyLow operating costs as a result of the new monoblock designExtremely precise air bearing rotary axis for low measurement uncertaintyLow space requirement thanks to compact designLow weight allows for installation almost anywhereFast amortization through low acquisition cost...show more -
product
Industrial Computed Tomography
TomoScope® XL NC
Coordinate measuring machine with x-ray tomography for the most stringent requirement with a small cone beam angle
-
product
Industrial Computed Tomography
TomoScope® XS FOV
Coordinate measuring machine for three-dimensional measurement according to the principle of computed tomography, Fast measurement in the field of view of the detector without moving axes with high resolution and high power
-
product
Industrial Computed Tomography
TomoScope® L
High Accuracy Multisensor coordinate measuring machine for 3D measurements using the principle of Computed Tomography, in combination with additional sensors (tactile sensor systems, optical sensors)
-
-
product
Industrial Computed Tomography
TomoScope® XL
Micro focus X-ray source up to 225 kV (option: 300 kV micro focus tube) Grater range of x-ray detectors Grater range of x-ray detectors
-
product
Industrial Computed Tomography
TomoScope® S
In both design and construction, the measuring machine meets the legal requirements for a fully protective device according to x-ray device regulations. Additional safety features have been included over and above the legal requirements.
-
product
Resistivity Tomography System
WGMD-60 2D
WGMD-60 geo-electrical 2D electrical tomography device is the new developed two-dimention electrical resistivity imaging (ERT) system, which integrated electrode switching and 200v transmitting high power in the mainframe. It support max 60 electrode switching.The whole system features light weight and high stability. It widly applys for different resistivity mapping or geopysical surveys as landslide survey, groundwater investigation, enginnering exploration and so on.
-
product
Computed Tomography and CT Scanner
When conventional x-ray images aren’t enough, a diagnosis for soft tissue conditions requires appropriate technology. Whether cross-sectional images are required or entire pictures of internal organs, CT exams and scanning are a vital part of a healthcare or imaging facility.
-
product
Computerized Knife-Edge Tomography (CKET)
Many new generation lasers, having a spectrum which is out of the sensitivity response of typical camera detectors require different technologies to be ex-amined. Tomographic knife-edge technology offers a feasible solution. Multiple knife-edges scanning from different directions provide beam profiles depen-dent on scanning angle. By reconstruction techniques used in tomography, an image-like profile can be reconstructed and analyzed. Various detectors are used to provide a wide spectral range measurement capability
-
product
Electrical Resitivity Tomography System
WERT-60/120 2D
The resistivity/IP mainframe of WERT-60/120 2D Resistivity Tomography system designed the receiver and the transmitter in one unit, which support 1D Resistivity, 1D Induced Polarization VES survey and 2D electrical tomography survey;it features multiple functions, high accuracy, fast speed, high reliability and excellent expandability.
-
product
MXI Computerized Tomography (CT) Option
The Nordson TEST & INSPECTION µCT inspection option provides Computerized Tomography (CT) functionality to compliment the 2D X-ray investigations on Nordson TEST & INSPECTION X-ray inspection systems. It uses the superior, sub-micron feature recognition 2D x-ray images, that Nordson TEST & INSPECTION X-ray systems always provide, to produce the best CT models for 3D sample analysis, virtual micro-sectioning and internal dimensional measurements. It reduces the number of time-consumin...show more -
product
Optical Coherence Tomography (OCT) systems
dOCTor™
dOCTor™ Optical Coherence Tomography (OCT) systemsoffer very high quality non-invasive tissue imaging in 2D and 3D. They are ideal for: In-Vivo Imaging Small Animal Imaging Tissue Engineering and Visualization Developmental BiologydOCTor systems are available in Swept-Source(SS) OCT and Time-Domain (TD) OCT configurations to satisfy different application imaging needs.
-
product
Optical Coherence Tomography Imaging Line Scan Cameras
OctoPlus Range
Teledyne e2v spent 2 years developing a CMOS sensor specifically for OCT. This resulted in the launch of OctoPlus, which has a specially designed pixel architecture that improves sensitivity and reduces signal roll-off to improve image quality by several dB vs state-of-the-art CMOS cameras, especially in deep structures.
-
product
3D CT Micro Or Nano Tomography And Digital Radioscopy Compact System
EasyTom
Versatility for a wide variety of applications and analysable products. 6 motion axis. Large volume Inspection.
-
product
CT-ALPHA
The CT-ALPHA system meets the most stringent demands in CT X-ray. With this Computed Tomography system, ProCon X-ray GmbH offers the highest possible flexibility for individual customer requirements.
-
product
CT Inspection System
FF35 CT
The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection results for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
-
product
CT-PORTABLE
Computed tomography (CT) has recently gained increasing importance as a non-destructive inspection method for industry. CT enables a quick visualization of a three-dimensional volume model of the external and internal structure of an object, which can also be interpreted by non-experts. So far, however, the acquisition costs and the relatively complicated operation often prevented a widespread introduction of computed tomography systems.
-
product
Cutting-edge 3D GPR array solution for efficient subsurface imaging cart solutions
Raptor
The Raptor system covers a wide range of applications and can be configurated with 450 MHz or 800 MHz antennas. Raptor 3D Arrays are based on Real-Time sampling (RTS) technology and the unique antenna design is a milestone in the evolution of the GPR. A Raptor Antenna can be arranged in different ways, which allows for both standard and more advanced GPR measurements. These include common mid-point (CMP), wide-angle reflection and refraction (WARR) and Tomography.
-
product
Electrical Resistivity/IP Imaging System
WGMD-9 2D/3D
WDA-1/WDA-1B Super Digital DC Resistivity/IP Meter is developed basing on years’ experience of studying and manufacturing advanced electrical resistivity tomography instruments. It's leading technical characteristics and function are much superior to the instruments of its kind worldwide.
-
product
FLIM Upgrade Kits for LSMs
As technology leader in equipment and techniques for single photon counting, Becker & Hickl offers a wide range of high-grade Fluorescence Lifetime Imaging (FLIM) systems for laser scanning microscopes since 1998. Our techniques have found broad application within the scope of Life Sciences, Clinical FLIM, Diffuse Optical Tomography (DOT), Fluorescence Correlation (FCS, FCCS), Förster Resonance Energy Transfer (FRET) and more.
-
product
High-efficiency Fiber Stretcher
PZ2
The PZ2 provides the most extensive stretch of our stretcher product family. It is a fiber wound piezoelectric element for use in a wide range of optical interferometric measurement and sensing system applications. Typical uses include open loop demodulation, sensor simulation, white-light scanning interferometry and large angle modulation of interferometric phase. The PZ2 is ideal for use in OCT [Optical Coherence Tomography] and OCDR [Optical Coherence Domain Reflectometry] applications requiring scattering or boundary definition measurements.
-
product
Imaging Platform
TRITOM
The patented TriTom imaging platform is based on Photoacoustic Fluorescence Tomography (PAFT) technology that provides unparalleled capabilities for whole body imaging and in vivo characterization of small animal models.
-
product
Industrial CT Scanning Services
Computed tomography (CT) is also referred to as industrial x ray and industrial imaging. It is an x-ray methodology yielding 3-dimensional (3D) results by placing an object on a rotational stage between an x-ray tube and x ray detector, rotating the object 360 degrees and capturing images at specific intervals—such as every degree or every half degree.
-
product
Inline 3D-CT Automated X-ray Inspection Systems (3D-AXI)
3Xi Series
Saki's 3D-AXI (X-Ray) series adds significant inspection capability. The system utilizes Planar Computed Tomography (PCT) providing high precision CT imaging at high speed.
-
product
Medical Imaging
ams offers high-speed, low-noise and low-power sensing solutions that enable manufacturers of Computer Tomography (CT) equipment and digital X-Ray Flat Panel Detectors (FPD) to produce crystal clear images while exposing patients to low doses of radiation. We are taking our leading imaging sensing solutions and expertise forward to achieve an unprecedented level of image accuracy while enhancing convenience and safety for the user.
