Showing results: 256 - 270 of 306 items found.
-
TS8980 -
Rohde & Schwarz GmbH & Co. KG
The R&S®TS8980 is the most compact full range conformance testing solution on the market for testing in line with requirements from GCF, PTCRB and regulatory bodies. It supports the entire device certification process for RF and RRM, covering the widest range of technologies including 5G NR based on 3GPP and carrier acceptance specifications. The test system is available in various configurations to cover the required scope of testing.
-
Model LXT-380 -
Teledyne Analytical Instruments
The Model LXT380 transmitter is a single or dual channel, intelligent, multi-parameter designed for the online continuous measurement of pH, ORP, Specific Ion (pION), dissolved oxygen, free chlorine, total chlorine, conductivity and resistivity. The Model LXT380 Tramsitter digitally communicates with the SP3X digital sensor, automatically configuring the trasmitter's menues and display screens to the measured parameter. The LXT380 tramsitter can be Loop powered or 4-wired DC powered. The standard configuration has a 4-20 mA and a serial communication port with MODBUS RTU output. Alarm relays option is only available on 4-wired DC powered transmitters. LXT380 Transmitter loop is available in FM, ATEX and IECEx certifications.
-
MEB -
The Eastern Specialty Company
Perform qualification, disconnect, communication, and advanced functional tests with TESCO’s new Meter Engineering Board. With basic metrology (0.1% accuracy) TESCO’s new MEB can also be used as a demand board or a time-run board, as part of meter certification, or to meet regulatory testing requirements. A new socket design provides automated operation to make loading easier. All new TESCO boards include our new electronically actuated sockets.
-
Micropross MP500 PT1-NFC -
NI
Support for ISO 14443 A/B, ISO 15693, MIFARE™, FeliCa™. Measurement correlation with NFC Forum and EMVCo certification test bench. Automated test executive with ready-to-run test sequences. Reader/Writer and Card Emulation modes, resonance frequency measurements supported on same antenna. Embedded analog measurements - LMA, field strength, S11, Q factor, waveform characteristics. Physical parameter/waveshape characteristic definition
-
Rohde & Schwarz GmbH & Co. KG
Only conformance test sytems from Rohde & Schwarz cover all relevant digital mobile device generations.The key to success is comprehensive access to RF, RRM, LBS and PCT test cases as defined e.g. for 5G NR in 3GPP TS 38.521-1 to -4 (5G NR RF), 38.533 (5G NR RRM), 38.523-1 (5G NR PCT), 37.571 (LBS).The Rohde & Schwarz conformance test solution portfolio consists of approved test platforms for device certification by GCF and PTCRB that support both TDD and FDD and all relevant 5G NR bands in both sub-8GHz (FR1) and mmWave (FR2) frequencies, as well as all frequency bands for LTE, WCDMA and GSM.
-
National Technical Systems
NTS provides lightning protection engineering, certification plan preparation and verification testing services to airframe and aerospace systems manufacturers around the world. With a lead role in major commercial and military design programs, our engineers take a system-wide approach to assuring that lightning protection is compatible with space and weight limitations, electromagnetic compatibility and electromagnetic pulse. Our experience includes traditional designs, all-composite and fly-by-wire aircraft, as well as avionic upgrades and engine modifications.
-
9545-A -
TSI Inc.
The VelociCalc® Air Velocity Meter 9545-A is like having multiple meters for the price of one. This meter simultaneously measures and data logs several ventilation parameters using a single probe with multiple sensors. It measures velocity, temperature and relative humidity; and calculates flow, wet bulb and dew point temperature. Ideal for optimizing HVAC system performance, commissioning, plant maintenance, critical environment certification and duct traverses. The 9545 model has an articulated probe.
-
NI
The C Series Functional Safety Module offers SIL 3 certification, according to IEC 61508. The safety logic solver resides inside the module, and you can program it with the included Functional Safety Editor software. The module contains built-in diagnostics that can monitor the status of the hardware and the integrity of the connections. You can use these modules to control critical safety functions in manufacturing assembly and test cells, large physical tests, condition monitoring applications, and process monitoring and control.
-
Teledyne Defense Electronics
Teledyne e2v HiRel provides microelectronics packaging and products with a full range of packaging solutions from COTS to MIL-PRF-38534 compliant (Class H & K) qualifications. HiRel provides a one stop solution for your microelectronic assembly, evaluation, test and screening requirements. Our MCM packaging technology enable our customers to meet size, weight, power and cost (SWaPC) requirements without a sacrifice in performance. Our numerous certifications including AS9100, ISO 9001, and MIL-PRF-38534 Class H accreditation, all of which are integral factors in our company-wide initiative to deliver high-reliability microelectronic devices that meet our customers' stringent requirements. We are a DOD Trusted Source for Microelectronics Packaging, Assembly, and Test.
-
OBS-ONE PM unit -
HORIBA, Ltd.
OBS-ONE PM unit is the industry-leading on-board Particulate Matter (PM) measurement system. It collects PM on a filter paper, using a partial flow gravimetric sampling method, while simultaneously measuring real-time PM. A key feature of this design is the use of a venturi flow meter which enables reliable proportional sampling and accurate exhaust gas flow measurement under transient flow conditions. Combine the GAS unit and PM unit to perform certification tests on heavy duty and non-road vehicles.
-
OBS-ONE GS Unit -
HORIBA, Ltd.
OBS-ONE is the latest Portable Emissions Measurement System designed for engine/vehicle certification under real road conditions.It measures concentrations of emissions (CO, CO2, THC, NOx, NO2), particulate matter, air-to-fuel ratio, exhaust flow rate, GPS data, environmental conditions (atmospheric temperature, humidity and pressure) and calculates mass emissions.OBS-ONE features the highly adaptable, intelligent operating platform called “HORIBA ONE PLATFORM” which integrates other ONE series product data and optimizes test cell operation.
-
Amprobe Test Tools
When you work with electricity, you want tools that are field tested and proven to meet the highest standards. All Amprobe tools undergo rigorous examination in our state of the art testing labs, ensuring quality and full compliance with the latest IEC and CE safety regulations. They are also listed with third party certification labs worldwide. Amprobe electrical testers include circuit tracers and testers, non-contact voltage detectors, voltage meters, socket testers and more to cover all aspects of electrical testing.
-
PSE Instruments GmbH
For regions with stable weather conditions, PSE provides two outdoor bi-axial trackers, which keep test samples perpendicular to the sun. PSE trackers are designed for outdoor testing and certification of both solar thermal collectors and PV modules. With our trackers it is possible to test more than one collector at the same time. Simultaneous collector testing can allow direct comparison of different collector designs under identical conditions or increase the measurement throughput of collectors and modules. In our product line we offer the following tracking systems:
-
ARK Ultra Rugged Series -
Advantech Co. Ltd.
The Fanless Embedded Systems ARK-V&S series are designed for rugged and space-critical in-vehicle and video surveillance applications. These embedded systems feature in-vehicle power (9~36Vdc, ISO-7637-2), in-vehicle certifications (E-Mark, IEC-60721-3-5 5M3), extension capability and wireless communication (GPS/G-sensor/Wi-Fi/3G/CANBus) for in-vehicle NVR applications. As for video performance, these embedded systems provide high graphic power (Up to 1080p/720p @120fps) and support IP Camera (4 Ports 10/100 PoE, IEEE802.3af) to maintain stable performance for mobile NVR
-
Applied Image, Inc.
The UPC Verification Calibration standards are a unique set of symbols that assures an exact and reliable primary bar code standard exists for UPC codes based on ANSI X3.182/ISO 15416 methodology. These standards assures that manufactures of verification equipment, scanners, QC labs and end users now have an accurate basis for checking the measurement capabilities of their equipment. These standards are intended as a fundamental calibration tool for an QC program, providing a continuous scale from best to worse case characteristics of each parameter. With complete NIST traceable data supplied, it is ideally suited to those requiring traceability, such as ISO certification. Each symbol is individually calibrated to ANSI X3.182/ISO 15416 standards using a custom built microdensitometer. These cards are supplied calibrated for use with a 6 mil scan aperture and 660nm wavelength. (calibration wit other aperture sizes or wavelengths is available)