Showing results: 1831 - 1845 of 2773 items found.
-
Leuze electronic GmbH + Co. KG
If doors, flaps and covers need to remain closed for safety reasons during the operation of machines, then safety switches for position monitoring and for the protection of personnel and systems are required. The safety switches of the S20 and S200 series with their robust housings and wide range of installation options can be used universally. The S300 position switches monitor the reaching of final positions. Variants with plunger and various actuators enable optimum adaptation to the installation situation. The S400 safety hinge switches unite the safety switch and door hinge functions in one component.
-
QCP-1553 -
Terotest Systems Ltd.
The QCP-1553 module is a rugged, reliable, full featured, Compact PCI module designed to provide a stand-alone, MIL-STD-1553A/B interface for avionics applications. Up to four independent dual redundant MIL-STD-1553 databus streams are supported by the 3U QCP-1553 module. Additionally, the module offers full functional test, simulation, monitoring and databus analyzer functions for MILSTD-1553A/B applications. An onboard IRIG-B time code decoder and generator allows users to accurately synchronize single or multiple QCP-1553 modules to a common time source.
-
FMC164 -
Sundance Multiprocessor Technology Ltd.
The FMC164 is a digitizer FMC featuring four ADC channels with 16-bit resolution and a 250 Mega samples per second sampling rate per channel. With a flexible clock generation and distribution scheme, the FMC164 allows control on sampling frequency and analog input gain through serial communication with a carrier card. The FMC164 design is based on the TI ADS42LB69 Dual Channel 16-Bit 250 MSPS A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.
-
FMC168 – LPC -
Sundance Multiprocessor Technology Ltd.
The FMC168 is a digitizer FMC featuring eight ADC channels with 16-bit resolution and 250 Mega samples per second sampling rate per channel. With a flexible clock generation and distribution scheme, the FMC168 allows control on sampling frequency and analog input gain through serial communication with a carrier card. The FMC168 design is based on the TI ADS42LB69 Dual Channel 16-Bit 250 MSPS A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.
-
JW8002 -
Shanghai Joinwit optoelectronic Tech,co.,Ltd
JW8002 Bench-top stabilized laser source is a new instrument with high output stability and good wavelength stability, which is developed byJoinwit Company using automatic optical power control (APC) technology and automatic temperature control (ATC) technology. JW8002 is an ideal instrument for measuring optical device characteristics, device aging, monitoring, experiment, etc. JW8002 is simple in application and design, easy to use and maintain. Widely used in optical communication, optical transmission, optical fiber sensing and other fields of scientific research, production and engineering.
-
National Technical Systems
Different types of devices have different thresholds for acceptable amounts of acoustic noise. Acoustic testing services assess how your product will perform in real-world conditions, and whether or not further revisions should be made to reduce noise. At NTS, we have more than 50 years of experience performing acoustic noise testing and monitoring. We can determine an appropriate testing protocol for your needs, and ensure it is completed to the highest possible standards at one of our many test centers located across the country.
-
FieldLab 58 -
Ametek Spectro Scientific
The Spectro FieldLab 58 is a rugged, portable expeditionary fluid analysis system that gives operators in the field the ability to perform comprehensive, mobile lubricant sampling. The battery-powered device enables complete lubricant assessment for condition monitoring and rapid results that permit informed maintenance decisions. It takes only 3 ml of oil to perform a comprehensive oil analysis and no chemicals or solvents are needed for sample preparation or cleaning. The complete analysis, with all four tests, only takes about 5 – 7 minutes, depending on oil viscosity.
-
Extech RH200W -
Extech Instruments Corporation
Extech’s Multi-Channel Hygro-Thermometer, with easy-to-read 1.3" (33mm) digits, displays indoor Temperature and Humidity levels. You can connect up to 8 wireless transmitters to remotely measure Temperature/Humidity levels up to 98ft (30m) away. The LCD is designed with an auto-night light and it displays icons that indicate indoor comfort levels and trending arrows that show the increase, decrease or constant readings. It also records Min/Max for the duration of each measurement session. Ideal for multi-room environmental monitoring for restaurants, manufacturing facilities, offices, homes, greenhouses, and storage/archive buildings.
-
Borgtech Pty Ltd.
The FlexIO system is intended as a customisable IO module for remote data acquisition, monitoring or control reach extension where conventional wiring is difficult or impractical. The system allows a remote IO unit to communicate back to a central host. This could be part of a larger SCADA system or a small stand-alone system. It can be hard wired or connected via radio data modems. Input states can be read and output states set. This technology demonstrator has 8 inputs, 4 outputs, and iButton port and communicates via RS232 at 9600 BAUD.
-
Friendly Technologies Ltd.
Friendly's Smart Home management solution is a full solution for management and monitoring of millions of households. It enables service providers to introduce their own Smart Home Service to subscribers, offering various Smart Home service packages. Friendly's Smart Home Management platform provides subscribers with a coherent and holistic view and control of all devices in their Smart Home: from appliances and security sensors, to cameras and power management, including camera view, recording sensors status, alarms upon events, automated scenarios and more.
-
Advantech Co. Ltd.
Advantech WebAccess/NMS is a web browser-based software package for networking management system (NMS). Advantech WebAccess/NMS is designed with SNMP and ICMP communication standards for managing all Ethernet-Enabled Advantech products and third-parties’ devices. WebAccess/NMS can bring users an easy-to-use platform to monitor and manage networking remotely. WebAccess/NMS enables industrial grade centralized networking management. A synthetic platform developed for monitoring, setting and maintaining devices via IP-based network. WebAccess/NMS includes Device Management, Alarm Management, Efficiency Management, Topology Management and System Management
-
C Series LIN -
NI
C Series LIN Interface Modules are bus interfaces for developing applications with the NI-XNET driver. The NI-XNET device-driven DMA engine couples the LIN bus to host memory to minimize message latency. You can import, edit, and use signals from LDF databases in integrated LIN databases. C Series LIN Interface Modules work well for applications requiring real-time, high-speed manipulation of many LIN frames and signals, such as hardware-in-the-loop simulation, rapid control prototyping, bus monitoring, and automation control.
-
HE-200H -
HORIBA, Ltd.
HE-200H connects conductivity sensor (FES-125F,126F) and measures conductivity and temperature in the sample water. It can be used not only for measurement of electrical conductivity in aqueous solution, but also for concentration adjustment and rinse monitoring of CIP, etc., as well as for concentration monitor of process.
-
HE-300C -
HORIBA, Ltd.
HE-300C connects conductivity sensor (ESH/FS Series) and measures conductivity and temperature in the sample water. It is suitable for monitoring pure water/boiler water drainage recovery control and inline measurement of pharmaceutical water conductivity according to USP<645> quality guidelines.
-
HE-200C -
HORIBA, Ltd.
HE-200 connects conductivity sensor (ESH/FS Series) and measures conductivity and temperature in the sample water. It is suitable for monitoring pure water/boiler water drainage recovery control and inline measurement of pharmaceutical water conductivity according to USP<645> quality guidelines.
