Filter Results By:
Products
Applications
Manufacturers
-
product
Boundary-Scan Test Coverage Analysis Tool
ScanExpress DFT Analyzer
Test coverage statistics provide engineers and managers valuable information to make critical decisions in product development and manufacturing.ScanExpress DFT Analyzer is an automatic test coverage analysis tool for printed circuit boards and systems that include a mix of boundary-scan and non-boundary-scan devices. The tool assists design and test engineers to increase fault coverage and reduce boundary-scan test procedure development times. Using ScanExpress DFT Analyzer results in better informed test decisions.
-
product
Design for Testability (DFT Test)
Corelis can provide you with design consultation and an analysis of your design for boundary-scan testability. We will review your design and make specific recommendations that if implemented will improve the testability. We can also suggest improvements that will increase test coverage and allow boundary-scan to be implemented in a more cost-effective manner.This service also includes a DFT test coverage analysis that we recommend to do after schematic capture and before PCB layout. At this stage of product development, Corelis provides you with a comprehensive test coverage reports that identifies all of the boundary-scan nets and pins and classifies them as completely tested, partially tested, or not tested. The report also recommends where to add test points (pads) for physical “nails” access if additional test coverage is required.
-
product
Design For Testability Review
Design for Testability ReviewCorelis can provide you with design consultation and an analysis of your design for boundary-scan testability. We will review your design and make specific recommendations that if implemented will improve the testability. We can also suggest improvements that will increase test coverage and allow boundary-scan to be implemented in a more cost-effective manner.
-
product
Analysis Software
Analysis software that can streamline how you collect, analyse and report your bat call data.
-
product
Logarithmic Periodic Broadband Antennas
Directional, active broadband antennas that are the ideal solution for interference tracking, site surveying, and most general RF and EMC analysis applications, due to their unique dipole elements positioned along the antenna axis in a triangular shape.
-
product
Photon-Counting Line Camera
X-Scan ME
The X-Scan ME is a complete product family of ready-made photon-counting line cameras and critical detector accessories that are designed for harsh industrial environments. The series is an ideal solution for the sorting, grading, quality inspection, material analysis, and optimization of complex manufacturing processes in recycling, food processing, mining, and other process industries.
-
product
Elemental Analyzers
Bruker manufactures instruments for elemental analysis from 100% down to the sub-ppb trace level. Easy-to-use solution packages help customers in process and quality control to meet industry norms and standards including ASTM, DIN, ISO and FDA. Highest analytical accuracy and precision enable academic research from lab to field.
-
product
Elemental Analyzers
Bruker manufactures instruments for elemental analysis from 100% down to the sub-ppb trace level. Easy-to-use solution packages help customers in process and quality control to meet industry norms and standards including ASTM, DIN, ISO and FDA. Highest analytical accuracy and precision enable academic research from lab to field.
-
product
Confocal Micro-Raman System
alpha300 access
access is a micro-Raman single-spot analysis and mapping microscope. It was specifically engineered for budget-conscious customers with high demands on instrument performance. Its outstanding spectral quality, optical throughput and signal sensitivity are ensured by well-established WITec optical elements. The high-quality microscope setup of the access is also the basis for its full upgradability.
-
product
Oxygen/Nitrogen/Hydrogen Analyzers
EMGA-Expert
The characteristics and performance of metal and solid materials, including steel, various other metals, ceramics, and electronic materials, are determined by the amount of oxygen, nitrogen, and hydrogen. Analyzing elements in such materials at high accuracy and with a small amount has become increasingly important in the study and performance analysis of materials.The EMGA Series Oxygen/Nitrogen/Hydrogen Analyzers significantly reduces analysis time and costs while enhancing analysis accuracy and functionality. Pursuing also usability, the EMGA Series strongly supports improved efficiency in material research and development and quality control.
-
product
Tool
Imagix 4D
Imagix 4D is a tool to understand, document and improve complex, third party or legacy source code in C, C++ and Java. Imagix 4D automates the analysis of control flow and dependencies. It detects problems in data usage and task interactions. With Imagix 4D you increase productivity, improve quality, and reduce risk.
-
product
Liquid Analysis
Comprehensive product range for all analytical parameters. Environmental protection, consistent product quality, process optimization and safety – just a few reasons why liquid analysis is becoming increasingly essential. Liquids such as water, beverages, dairy products, chemicals and pharmaceuticals have to be analyzed day in and day out.
-
product
NanoVIP® TWO™
NANOVIP® TWO™ is a modern, powerful, portable network analyzer developed for professional analysis of consumption and power quality of the most complex electrical networks.It can be used on single-phase, two-phase, three-phase (3 or 4 wires balanced) networks, low and medium voltage.
-
product
Daily QA Accelerated
Daily QA™3 & rf-Daily QA™3
Daily QA™3 sets the standard for efficient and powerful routine QA. A single beam measurement results in five beam quality checks. Accepted data is automatically written to a database in real time, where it is available for trending, review and analysis. It’s that simple, and that powerful.
-
product
Datalogger for IAQ Analysis
HD37AB1347
Datalogger for indoor air quality analysis (IAQ). Measurement of airspeed, temperature, relative humidity, atmospheric pressure, CO² and CO.
-
product
In-Line Fat Measurement
FATSCAN
TOMRA’s new FatScan fat analyzer allows for the continuous analysis of meat to precisely determine its fat content. This functional and compact machine can be easily integrated in production lines and is specifically designed to assist smaller meat processors in delivering a consistent and uniform product. The innovative FatScan can analyse both fresh and frozen meat and it measures fat in real-time, delivering highly accurate and consistent results. The hygienic and robust analyser penetrates deeply into the meat, and measures across the full 500 mm width of its conveyor belt. The design is open, so all surfaces can be visually inspected and sanitized, using high pressure water. The FatScan is able to analyse up to 7 tons of meat per hour, making it an ideal choice for small and medium size processors. This, along with the consistent end product quality and savings generated through reduced lean give-away, helps you to drive up your profits.
-
product
Water Iron Analysis
Aztec AW633
The Aztec 600 colorimetric iron analyzer provides reliable and accurate measurement of iron concentrations to improve drinking water quality and optimize chemical usage.
-
product
Handheld XRF Analyzer
ProSpector II
ElvaX ProSpector is a powerful handheld analyzer employing the latest developments in XRF analysis. Due to the advanced electronics and state-of-the-art mathematical algorithms ProSpector provides ultimate quality of measurement within a couple of seconds. It is an intuitive and user friendly instrument for highly accurate elemental analysis in a variety of applications.
-
product
Low-Noise Design
* Sound Quality: Find our what your end users like or dislike about emitted noise. * Low-Noise Product Design: Apply interinsically-quiet design principles to your device * Fan Noise: move cooling air quietly * Gas Flows: Reduce noise from industrial gas processes * Advanced analysis and signal processing: Finding the relevant "needle" in the "haystack" of data.
-
product
Leak And Seal Strength Detector
LSD-02
Jinan Leading Instruments Co., Ltd.
LSD-02 Leakand Seal Strength Detector is applicable in the quantitative measurement of leak, heat seal strength, heat seal quality, and burst pressure of each heat sealedges of the flexible packages that are made using heat seal and adhesiveprocessing, as well as sterilized packages; the quantitative measurement ofleak performances of all kinds of plastic pilfer-proof closures; thequantitative measurement of the unitary airproof, compression resistancestrength, cap body joint strength, cap disengaging strength, seal strength ofedge and butting strength of various flexible tubes. It can also provideevaluation and analysis for the compression and burst resistance strength ofthe materials of flexible packaging bags, the torsional airproof index of cap,the cap joint and disengaging strength and the stress strength; as well as theairproof performances, the compression resistance performance and the burstresistance character of unitary bottle, etc.
-
product
AC Line Harmonics Analyzer Including Flicker Analysis With UK, Schuko Or US Socket.
HA1600A
Compliance quality measurements to EN61000-3-2 and EN61000-3-3Measures peak or rms voltage or current, real or apparent power, power factor, phase etc.Tabular/histogram of 40 harmonicsVoltage/current waveforms displaysContinuous analysis with real-time graphical updateWide range of power connectors available320 x 240 pixel high-contrast displayUSB, RS232 and printer interfaces fittedPC control and documentation software supplied (HA-PC-Link+)
-
product
LCR Meters & Impedance Measurement Products
Hewlett Packard, Agilent and Keysight have contributed innovations and product excellence in impedance analysis for over half a century. Whether your application is in R&D, production, quality assurance, or incoming inspection, we take pride in contributing to your success. We strive to deliver complete solutions to meet your needs, from impedance analyzers to a wide variety of test accessories. Achieve success with Keysight’s impedance measurement solutions.
-
product
OEM Solutions
Headwall-manufactured gratings, spectrographs, and spectrometers maximize the quality of UV-VIS-NIR analysis. Each grating is an original piece, unmarred by replication processes. These master-quality gratings feature superior spectral and spatial resolution and extremely low scatter, meeting the demands of your high-performance instrument. We have more than 40 years of experience producing gratings and spectral engines for ourselves and for our OEM customers.
-
product
The Ultimate In End-User Experience Analytics
Endpoint RTC Analytics
No telemetry portrays a more accurate depiction of a user’s experience than statistics captured by the endpoint itself. With support for everything from modern browser-based WebRTC sessions to the time-tested desk phone and soft phone RTCP-XR and QOS feeds, Nectar offers the most comprehensive endpoint quality analysis tools in the UC and Contact Center markets today.
-
product
Leak Analysis
Hiden LAS
The Hiden LAS system is designed to analyze the leak rate from sealed packages, from a quality control or research and development perspective.
-
product
XRF analysis
X-Supreme8000
XRF analysis (X-ray fluorescence) with the highly flexible and powerful energy-dispersive X-ray fluorescence (EDXRF) spectrometer X-Supreme8000 for quality assurance and process control requirements across a diverse range of industries.
-
product
Data Analysis Software
PV II
Software to communicate and display data from PQPro™ Power Quality Analyzer.Can connect wirelessly (Bluetooth) to multiple instruments.View real time data numerically, vector diagrams and analog meter format.View downloaded data in graphical form.Multiple graphical pages can be open at the same time.Graphs can be annotated with data boxes and text bubbles.Graphs can be pasted in to Word or Excel files.Export data in CSV format.Export data in PQDIF format.Export section of data file to PV II format.Generate reports with both graphical and tabular data.
-
product
Small Business Solution
ProWorks is a multi-user process management tool. It will enable you to deploy and manage the execution of established best practices throughout your organization. All users work in an environment that allows them to share expertise and centrally access all process related documentation. Real time status is available at a glance and bottlenecks are immediately identified. Automatic event notification and escalation reduces process execution time, minimizing lead times. Complete process history is recorded for post process analysis or data mining. ProWorks’ ability to manage and track standard processes makes it an excellent tool for supporting quality initiatives such as ISO 9000.
-
product
High-Speed MWIR Science-Grade Camera
FLIR X6980™
The FLIR X6980 is an extraordinarily fast midwave IR camera designed for scientists and engineers who need to capture high-speed imagery for accurate thermal analysis and custom radiometric measurements. This thermal imaging camera combines 640 × 512 resolution with blazing-fast frame rates, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X6980 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
-
product
Mineral Analyzer
TerraSpec 4 Standard-Res
Analytical Spectral Devices, Inc.
Increase efficiency and optimize metal yield with high-throughput mineralogical analysis, and enjoy even greater data quality with the new TerraSpec 4 Standard-Res mining analyzer. Top mine operations around the world already trust ASD's TerraSpec line of mining instruments for their critical mineral analysis measurements.
