Showing results: 3766 - 3780 of 7546 items found.
-
IQD Frequency Products Ltd
GPS Disciplined OCXOs (Oven Controlled Crystal Oscillators) are a range of advanced clock modules which provide electrical timing functionality for distributed network systems. These units primarily revolve around the 1PPS (pulse per second) timing synchronisation signal produced by a GPS frequency receiver which is derived from transmitted timing information received from GPS satellite systems.
-
EnsembleSeries™ CCM3011 -
Mercury Systems, Inc.
*OpenVPX carrier module designed to use the Data Plane*PCI/PCI-X interface at up tof 133 MHz on each site*x8, x4 and x1 PCIe interfaces*Advanced OpenVPX system management functionality enables remote monitoring, alarm management, and hardware revision and health management*Conduction-cooled and air-cooled variants available
-
Holding Informtest
Automated measuring systems based on the open standards AXIe, VXI, LXI and PXIe have enclosures (base units or chassis) in which modules of a given standard are mounted. Informtest Holding manufactures a wide range of chassis in open standards AXIe, VXI, LXI and PXIe.
-
110V -
Shenzhen Setec Power Co., Ltd.
1. Power supply modules of series SET- 220V/110V are compact battery charging rectifiers with rear side connectivity. The rectifiers are designed for high voltage Power Plants and Substations. Due to the modular concept and a high scalability the user is able to equip the power supply with additional modules according to his actual power profile. The chargers are very user friendly and can be swapped as well as upgraded during system operation.
-
Model 45.50 -
Geotech Instruments, llc
The CRS System consists of amplifiers, VCO's, I/O systems, multiplexers, digitizers, and radios. Electrical connection between the modules is provided through a ribbon cable harness within the enclosure.
-
VibroLine -
IDS Innomic GmbH
The VibroLine devices are stationary analysis modules for continuous condition monitoring on machines and systems. The VibroLine condition monitoring system can be used to monitor vibration acceleration, speed or displacement with freely adjustable frequency filtering for different applications. Permanent vibration monitoring of your machines not only brings competitive advantages through the increased efficiency of your systems, but also protects against unwanted machine failures. With the VibroLine devices, you can monitor not only the sum, order and storage characteristics, but also impact characteristics. This offers you enormous flexibility in terms of monitoring parameters for your condition monitoring.
-
NEOSEM TECHNOLOGY INC
We provide our customers with Automated SLT (System Level Test) Solutions for DRAM Module HVM test. Our solution gives our customers the best possible combination of technologies for the best performances and manufacturing effiencies - increasing yield, reducing cost of ownership and accelerating time-to-market. The integrated system with CMB (custom designed Motherboard), Thermal subsystem and Automation technologies provides a Turn-key Automated Test System which reduces Integration risks and time to Volume Production. Our Automated DIMM SLT (System Level Test) System is highly configurable to address our customers needs and environments constraints for Best Cost of Ownership, Best Performance and shortest Time to Yield.
-
ETL-15 -
Kharkovenergopribor Ltd.
ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, including burn module, surge wave generator, time-domain reflectometer and high-voltage DC test module.
-
Aurora -
Detection Technology Inc.
Aurora is a product family of digital X-ray detector solutions powering all security and a variety of industrial line-scanners. The product family consists of a wide range of stand-alone detectors, and all needed building blocks, like ready-made detector boards, modules and readout electronics, for end-to-end systems. Aurora provides superior image quality and a fully digitalized data path in the most robust, modular and easily scalable platform. It is a plug-and-play type solution speeding up time-to-market and delivering total cost savings.
-
RSM/128-MF -
Cytec Corp.
These Chassis controls up to 16 8x1 modules, 32 4x1 modules or any combination or configuration such as a 16x8 matrix, 32x4 matrix or two 16x4 matrices. Matrix configurations are non-blocking and physical layer switches act like a cable connection with D connectors creating a one to one connection between D9, D15 or D25 connectors. All wires are switched as a group on each connector for easy programming. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
ETAP Enterprise
DC system modules provide analysis capabilities for engineers to design and maintain direct current electrical networks.
-
CAES
CAES provides data links and telemetry modules for use in UAV systems, missiles and munitions.
-
NI
The C Series Serial Interface Module adds RS232 or RS485/RS422 serial ports to CompactRIO systems. The serial ports are accessed directly from the field-programmable gate array (FPGA) to offer you flexibility in communicating with serial devices. The module has individual buffers on every port that save FPGA space and simplify programming. The C Series Serial Interface Module supports standard start bit, stop bit, and handshaking settings. It uses an external power to provide maximum compatibility and reliability under all serial port conditions. You can choose from both enclosed and non-enclosed modules.
-
NI
CompactRIO Chassis can add C Series I/O modules to an EtherCAT-, Ethernet- or MXI-Express-compatible system. You can program the onboard FPGA for inline processing, high-speed I/O, and control. You can also use scan mode to quickly expand your real-time system.
-
NI
Digital Modules for Remote I/O provide 24 V digital inputs or outputs and offer 1‐, 2‐, 3‐, and 4‐wire spring terminal connection options. You can use inputs as counters or standard digital inputs, and you can adjust filter time to improve measurement quality. Inputs can include a built‐in power supply for sensors. Output modules feature circuit and overload protection and can drive up to 500 mA per channel, up to 8 A per module.A remote I/O system consists of an EtherCAT bus coupler and individual modules mounted on a DIN rail. You control the Digital Module for Remote I/O from a NI real‐time controller. You can use remote I/O hardware to add low‐cost I/O for simple tasks while your controller handles advanced tasks such as image processing, motion control, and high‐speed or specialty measurements.
