Showing results: 361 - 375 of 1191 items found.
-
KI2724-INGAAS -
Kingfisher International
A SM & MM Quad Optical Loss Test Set used to test power, insertion loss, continuity and faults on multimode and single mode fiber optic systems at 850 / 1300 nm & 1310 / 1550 nm. In a small package, it is a powerful fiber optic multimeter / OLTS with improved test flexibility and productivity.
-
Exosens Group
Photonis designed the Micro Pore Optics detector to be used in X-Ray imaging applications. Its perfectly square, flat channels are optimized to allow X-Ray and UV photons to be focused or collimated due to the total external reflection at a grazing angle (<2°). Micro Pore Optics are installed on a number of international space missions.
-
O Series -
Bowman
The O Series combines high performance with a small x-ray spot size. This is made possible by the poly-capillary focusing optics system that replaces the collimator assembly installed in standard Bowman systems. The optics are designed to focus the x-rays coming from the tube exit window to a very small spot size (80μm FWHM) while retaining virtually 100% of the tube flux. So instead of attenuating the x-rays that can’t fit through the small apertures, as is the case with collimator systems, the poly-capillary optics assembly allows almost all of the x-rays from the tube to reach the sample. The result is much greater sensitivity for testing very small components or thin coatings. Shorter test times can achieve even better repeatability when comparing optics systems vs. a similar sized collimator.
-
Optical Wavelength Laboratories
OWL fiber optic visual fault locators (VFL) are specially designed to couple a maximum of optical energy into multimode and singlemode optical fibers by using a bright red fiber optic laser. Breaks, microbends, and other anomalies in optical fibers and connectors cause the intense bright red laser light to escape, thus revealing the presence of a fault. In addition to visual fault location, OWL VFLs can be used as a visual optical fiber identifier. A visual fiber optic identifier eliminates much of the guesswork during testing by identifying the fiber under test.
-
OptoScope SC-20 systems -
Optronis GmbH
The SC-20 streak camera system is characterized by its large detection area of 35 mm x 4 mm and a large usable screen diagonal of 40 mm. Signals are mapped onto the fiber optic input window and measured without the need for optical reduction. In the simplest case, the entrance optics consists of a slit mask that lies directly on the entrance window. In addition, a flexible extension with a shutter, a lens mount or an adjustable slot with coupling optics is possible. The time resolution in the sub-nanosecond range qualifies the camera for many applications in detonics and plasma physics.
-
KONCENTRIK V2 -
Seikoh Giken Co., Ltd.
Multi-functional system for test and measurement of fiber optic ferrules & cable assemblies. Fast and automated measurements of eccentricity.
-
Shaanxi Aitelong Technology Co., Ltd
Is a device that tests the integrity of a fiber cable and is used for the building, certifying, maintaining, and troubleshooting fiber optic systems.
-
Panasonic Industrial Devices Sales Company of America
Panasonic Fiber Optic Sensors and Sensor heads allow for stable detection in any application, even for use in hazardous environments. With over 180 Fiber Optic Sensor heads to choose from, you are covered from every angle, whether you need long distance, a high-temperature rating, or if you are short on mounting space.
-
DRA5228/F -
Hangzhou Huatai Optic Tech. Co., Ltd.
Raman Fiber Amplifier (RFA) utilizes the optic gain in the Stimulated Raman Scattering (SRS) in the optical fiber and realizes the amplification of the signal optic. FRA, with very low equivalent noise and a wide gain scope, can further widen the gain bandwidth by adopting multi-wavelength optical bump, which represents the development direction of the new optical fiber amplifier.
-
UVM-1 -
CRAIC Technologies
The UVM-1™ is a UV microscope that also can image in the visible and NIR. This UV-visible-NIR microscope embodies both advanced optics for cutting edge UV, color and NIR imaging and visualization. The system is a flexible design, very easy to use and very durable. It is designed with cutting edge CRAIC optics for the highest image quality and to give years of service.
-
Huihong Fiber Inc
Optical fiber ranger is test equipment that functions similar to an optical time domain reflectometer. It is used in single mode fiber test applications. The fiber optic ranger is much smaller size and lighter weight compared to the fiber optic OTDR, and it is much more cost effective. They are used in optical fiber links troubleshooting, maintenance and test.
-
Digital -
Langer EMV-Technik GmbH
The fibre optic cable are used to transmit digital signals from the device under test under EFT/burst interference.
-
OpticalCON -
Whirlwind Music Distributors, Inc.
The opticalCON powerMONITOR is a cost-saving, purpose-built measurement (monitoring) device for professional fiber optic broadcast, audio and video applications.
-
GAO Tek Inc.
Connector-end face contamination is a problem that shouldn’t be ignored when it comes to fiber optic cables and patch cords. Allowing contamination to take place or fester will lead to network issues and down-time which you don’t need. For any fiber optic cable network, a high quality fiber microscope is a necessary tool to identify where contamination may be presenting.
-
Fiber Lab 3200 -
M2 Optics, Inc.
Fiber Lab 3200 from M2 Optics Inc. is a must-have solution for anyone developing or testing fiber optic products and systems. Available in two types of rack-mount chassis with up to 300km per unit, it offers the most professional approach for using fiber in the laboratory or network. In addition, it provides maximum protection against potential fiber and connector damage.