Showing results: 886 - 900 of 1121 items found.
-
National Technical Systems
NTS performs a wide variety of fluid testing across a large spectrum of pressure, temperature, and rated fluid flow, as well as combined testing programs on a vast array of aerospace fluid components and systems such as process air, bleed and ram air, fuel systems, hydraulic systems, high pressure systems and cryogenic systems.
-
AMC715 -
Vadatech Inc
The AMC715 is a Processor AMC (PrAMC) with an on board 2.5" SATA hard disk drive in a single-module, mid-size AdvancedMCTM (AMC) form factor based on the AMC.1, AMC.2 and the AMC.3 specifications. The module is ideal to be used for data flow management within a chassis. The AMC715 provides a low cost solution with an integrated high capacity disk. With a storage capacity of over 320 GB and data transfer rates of 150 Mbyte/s the AMC715 is the ideal AdvancedMCTM smart storage. The PCIe interface is configurable as Host or Agent mode. The module has 512 MB of DDR2 memory on board.
-
LBA Group, Inc
LBA Technology "Blue Line" RF inductors are based on over 30 years of proven international performance. Blue Line inductors are unsurpassed for hi-Q, stability, and low RF losses. These inductors are manufactured from heavy silver plated copper conductors and brass fittings, treated to resist tarnishing. Windings are insulated with melamine or G-1 0 epoxy laminates. These materials are recognized for their exceptional RF qualities, arc resistance, mechanical strength, and low moisture absorption. Supporting frames are engineered to permit maximum access to windings for convenience in adjustment. The metallic frames are separated by insulators to prevent induced current flow.
-
Cadence Design Systems
A major new challenge at 20nm/14nm is the requirement for extra masks (double patterning technology, or DPT) to make existing lithography work at this advanced node. Read 20 questions on 20nm - a Q&A document. Escalating data volume and denser, more complex chips are testing the limits of traditional routing architectures. Even the slightest perturbations in the design flow can cause dramatic swings in design integrity. Engineers face a predictability crisis riddled with silicon failures, performance degradation, and prolonged design schedules. And new process and design innovationshigh-k metal gate, SOI, 3D-IC packagingare intensifying the pressures of adoption and rapid deployment.
-
WIKA Alexander Wiegand SE & Co. KG
Compression force transducers are designed for determining compression forces and are suitable for static and dynamic measurements in the direct force flow. WIKA force transducers are manufactured from stainless steel and other high-quality materials, are robust and are notable for their reliability and high quality even in complex applications. Our compression force transducers are available in different rated loads. They cover a wide range of application areas: For instance, these force sensors are employed in machine building or in the automation of plants to determine the pressing and joining forces, as well as for detecting weight in many industrial applications. You can select the pertinent technical and regional approvals as options.
-
ReaXus -
Teledyne LABS
Teledyne LABS ReaXus® reciprocating pumps covers a broad range of application needs, ranging from 5 mL/min to 300 mL/min and up to 6,000 psi. Whether you need low pulsation or are working with hazardous materials, the ReaXus line has an option for you. The single piston models are targeted towards moving material or providing pressure. The dual piston models are focused on continuous processing applications where a steady flow of material is important.The ReaXus product line is low maintenance and requires no calibration like other styles of pumps, saving your organization time and money.
-
KANOMAX USA, Inc.
The Kanomax Cabin Leakage Tester pressurizes or depressurizes the automobile vehicle cabin to measure the changes in cabin pressure. The control unit consists of a manometer and pressure transducers. The manometer detects the leakage flow, which is calculated by measuring the nozzle pressure relative to static pressure. The tester controls an adjustable fan to maintain static test pressure.
-
Extech AN300 -
Extech Instruments Corporation
The AN300 is a Large Vane CFM/CMM Thermo-Anemometer. This meter measures Air Velocity, Air Flow and Temperature. Extech’s Large Vane Thermo-Anemometer series allows for more precise readings on larger size ducts. Each meter simultaneously displays Airflow or Air Velocity and Temperature. Complete with 4 AAA batteries and hard carrying case.
-
Picomag -
Endress+Hauser AG
Reliable measurement and monitoring of industrial water, cooling water or warm water. Simultaneous measurement of flow and temperature. Flexible integration into all fieldbus systems via IO-Link. Commissioning and operation via Bluetooth® and SmartBlue App. Minimum conductivity ≥20 μS/cm. Fluid temperature –10 to +70 °C (+14 to +158 °F).
-
BW-MST-E5000 -
B&W Engineering Corp.
The Mechanical Shock Tower develops the kinetic energy electromagnetically. An iron core "bullet" is attracted to the magnetic core of the solenoid by the dense magnetic field that is created as current flows through the field coil of the shock tower. As the bullet is drawn into the center of the magnetic field the acceleration increases exponentially as the gap reduces to zero on impact causing the high impact shock
-
National Technical Systems
NTS Santa Clarita is home to our largest pneumatics test capabilities. The pneumatics test facility is designs to conduct testing of air flow, pressure and temperature management subsystems and components requiring compressed air in a controlled environment. Other environments which can be combined with pneumatic testing include; external thermal control, structural stress, and vibration.
-
PSE Instruments GmbH
This test system is designed to measure the heat transfer during the test of heat pumps and chillers with an integrated pump. The thermal energy is measured with a Coriolis mass flow sensor and two temperature sensors which can be positioned at the inlet and outlet of the test object. Additionally a pressure sensor measures the pressure drop of the heat exchanger of the object under test.
-
STAR-CCM+ -
Siemens Digital Industries Software
STAR-CCM+ is a stand-alone simulation solution for computational fluid dynamics (CFD), computational solid mechanics (CSM), heat transfer, particle dynamics, reacting flow, electrochemistry, electromagnetics, acoustics and rheology. STAR-CCM+ delivers accurate and efficient simulation technologies through a single integrated user interface and automated workflows. This facilitates the analysis and exploration of complex real-world problems.
-
Time Machine -
SolutionSoft Systems Inc.
Time Machine provides software virtual clocks that enable you to time travel your applications into the future or the past, facilitating time shift testing on your date and time sensitive application logic, such as month end, quarter end, year end processing, billing cycle, work flow, regulatory go live, and policy life cycle.
-
JYD-10A -
Kingrun Instrument Co., Ltd.
transformer neutral grounding resistor is the vital need in medium voltage AC distribution network that are also called by different names like Neutral Earthling Resistors. They are taken into use to limit the current that would flow through the neutral point of a transformer or generator in the event of an earth fault. They are also used for resistance grounding of connected generators and transformers.
